Similar Questions

• What a memory for my xw4400X/XK2

  I purhased the memory modules next to upgrade to 8MB and I get 5 beeps and lights to initialize.  This memory is not compatible?

  

  It's the old/working memory stick

  

  Hello:

  You can also ask your question on the Forum to Support HP Business - xw workstations section.

  http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.VCm0kjh0zGg

• PXI-8115 controller incompatible with the PXI-1050 chassis?

  I replaced two XP based PXI controllers with two controllers, PXI-8115 with WIN7 installed on them. System #1 has combined PXI-1010 chassis and System #2 has a combo chassis PXI-1050 chassis. The two 8115 controllers work correctly when it is installed in the #1 system (chassis 1010) do not produce but no video output when it is installed in the #2 system (chassis 1050). I use the same monitor on both systems, as well as the same adapter DisplayPort to VGA supplied with controllers. This suggests some kind of incompatibility between the 8115 and the 1050, but I can't believe I'm the first to connect a 8115 a 1050. Everyone knows about this problem? Y at - it solution or workaround? Is there something I forgot?

  Thank you

  PMAC

  OK, I found a solution but I still don't know why it is the solution.

  Each controller had a "Bizlink" adapter DisplayPort to VGA bundled with it. Of course, I tried two adapters with the same results on both systems. I tried a "Startech" DP to VGA that is used elsewhere in the installation and the system worked well. Why a brand different adapter works is quite confusing.

  For anyone else having this problem try Startech manufacturer DP2VGA.

  PMAC

• What is reasonable memory for Firefox use?

  Title says it all-

  What is reasonable memory for Firefox use?

  The normal use, I am an average of 1.2 G or about memory (of 16 G total); is this normal? Don't not maxing out at all but I was wondering.

  How to define and measure the use of memory for Firefox? Activity monitor? I use Firefox to write this. In the activity monitor, I see Firefox to 347 MB and Firefox Web Content to 259 MB.

• What is the max memory for an iMac in early 2008

  What is the max memory for an iMac in early 2008? MacSales.com shows a 6 GB kit, but crucial only shows a 4 GB kit.

  Thank you

  John

  The computer iMac (early 2008) has two SDRAM slots in the bottom of the computer and comes with at least 1 GB DDR2 SDRAM installed into a slot. The maximum amount of RAM you can install in the computer is 4 GB (a 2 GB SO-DIMM in each slot).

  Source:

  iMac (early 2008): specification of memory - Apple Support

• 1010 chassis PXI-6052E. to access the unused channels to HAVE

  Hello people,

  I have a 1010 (combo PXI/SCXI) chassis with a PXI-6052E installed in slot 8.  The 6052E connector is connected to a terminal block of 68 pins.  If I use the mulitplexed mode scxi modules, can I use the other 6052E analog inputs to measure other signals?

  I saw documents to direct wiring to a chassis scxi "separated" directly connected to a data acquisition card, but I have not found no information on the chassis of 1010 and the availability of channels daq (probably) not used.

  All documentation regarding this would be greatly appreciated!

  Best regards

  Chris

  
  

• What is the maximum memory for this computer what kind

  I want to restore my system like new or factory but I have no disk what the best thing to do and what is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

  What is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

  Maximum RAM

  2 GB

  http://support.Dell.com/support/eDOCS/systems/dsleest/specs.htm#memory

  Note: the manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

  Usually, just by pressing F11 continuously during the computer startup to display a boot menu offering the option you need.

  You may need to contact the manufacturer of your hardware (Dell) to see what options they have to repair Windows.

  UTC/GMT is 20:35 on Saturday, May 26, 2012

• What are the data for the PXI-6552-invalid range

  Hello

  Let say, I put the voltage custom for the PXI-6552 module

  2.4V - high level

  0.6V - low level

  Then, on canal0, I provide a signal of

  sample

  3V 0

  1 3V

  2 VOL. 2

  3-0V

  Thus, the sample 0.1 is high. Example 3 is Low.How sample 2? Please notify. Thanks in advance.

  Hi Engwei,

  Programmed tensions are the levels that you would have to exceed or down before a change of digital status is saved. This means that in your example, coming from a high level of 3V goes to 2V, the Analyzer signals would still record a strong logic. The deadband is actually a way to filter digital noise, common to the majority of the architecture of digital input.

  Best regards
  The Ilana Joshua
  Applications Engineer OR

• Questions about memory for Mac beginning of 2008

  Someone at - he used the Adamante memory in all their machines?  Available on Amazon 16 GB(2x8) 249 more 5.61 hii - 255,000 Macsales has their image on sale now for $279, usually $299

  Upgrade of RAM Apple Adamanta 16 GB (2x8GB) for Apple Mac Pro early 2008 (8 cores) 2.8 GHz CPU MA970LL/A DDR2 800 MHz PC2-6400 ECC Fully Buffered 2Rx4 CL6 1.8V FBDIMM

  by Adamanta memory

  Adamanta has a lot of memory on their site, but I think they mainly sell through Amazon

  Question # 2

  I'm looking at the specs on my early 2008 and noticed that the motherboard has 8 slots for memory-what is it for and why they are not met?

  Better buy RAM by Crucial > http://www.crucial.com/usa/en/memory-info?cm_re=top-nav-_-flyout-memory-_-us-mem ory

  I highly recommend them for the RAM.

• Question about the upgrade memory for my Satellite M40-307

  Sorry for the newbie question. But if I have 512 MB of memory for the time being, what are my upgrade options?

  Do I have to buy pairs of memory? So I can or buy 2 x 1 GB = 2 GB, or 2 x 512 MB = 1 GB + 512 existing. Or can I say just buy a single 512 MB or 1 GB chip?

  Since no one wants to answer:
  1. check if your laptop supports Dual Channel Ram (it should be, but just see the manual to be sure)
  2. knowledge of what type of RAM you have. This will add or remove a possibility of upgrade

  The thing with Dual Channel is, that you have the best performance if you use 2 RAM of the same type (really of the same type: company, size...)
  you could:
  3. Add a 512 MB of RAM of the same type you have
  3 b. buy 2 pieces of new RAM of the same type (1 GB + 1 GB, or 2 + 2 GB) and do not forget that your laptop supports this quantity (once again: manual to check)

  You will also find in the manual, if your computer supports DDR or same DDR2 RAM (faster)

  If you have lost your manual, you can download it here on the toshiba Web page

  I hope I could help a little.

• Pavilion p6608f: upgrade memory for p6608f

  Hello, my Pavilion p6608f came with 4 GB of RAM. I want to upgrade. By HP features, the motherboard is a MSI ms-7613 and it should support up to 16 GB of RAM (4 x 4 GB DIMMS). I bought 4 DIMM which seem to fit specifications, but the computer wouldn't POST after installation. I tried reseating the DIMMs, but no luck. My hypothesis is that the memory is not compatible.  I'm unable to find good information on the compatible memory for this computer on the site of Kingston, MSI site, or the site of HP. (Any ideas on one) why the memory I bought is not compatible and b) how to find compatible memory?

  Thank you.

  Saw that Crucial guarantees their recommendations, I'd go with it.  You may contact their Customer Service to see what they have to say if you are still skeptical.  I have recommended Crucial memory for years without reports of incorrect memory being received.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Beginner looking for the best upgrade memory for Tecra 8000

  Hello - I am currently looking to upgrade the memory on my Tecra 8000 the current 96 of at least 256.

  Is it possible that I can't find info on 256 MB extensions that are compatible

  I also want to upgrade my hard drive of at least 20 Gb, but I think it will be easier

  Any advice would be much appreciated

  Hello

  In my opinion, you should contact the Service partner and ask them what a memory module is compatible with your laptop. I found that PC100 128 MB (PA3005U) is certainly usable for Tecra 8000.

  Please be careful because all modules may not be recognized by BIOS correctly.

  It is possible that 256 MB RAM PA3069U - 1 M 25 is compatible but I'm not sure about this. Pick up information by the Service partner before buy you one.

• Source for 2 GB memory for NB100-12 has

  Can someone tell me where I can get the upgrade of memory for my NB100-12 2GM has? How much does it cost? To install it, I have to remove renovate 1 GM and replace it with the new memory or what is the procedure?

  First, a question - you run the pre-installed Windows XP version? If so, I'm not sure that it will support 2 GB of RAM - no one knows with certainty? + Official + the NB100 only supports the 1 GB, so I would check before you spend the money...

  Assuming your OS + fact + allow 2GB, I suggest that you try Crucial - good memory, quality service and a fair price. If you go to the following link, you can enter the details of your netbook, and it will provide a link to the correct memory:

  [Crucial memory | http://www.crucial.com/uk/netbook/index.aspx]

  Looks like it's about £20 now - prices have risen lately :( You could get a memory that of + a bit cheaper, but then you'd have the hassle of work exactly what to get.

  In terms of editing, you need to remove the cover on the bottom of the NB100 (it is set by a single screw). Remove the existing RAM and mount the new stick. Replace the cover and restart - job done :)

• Extension memory for 1620cds

  Hello, I want to install an additional memory for my 1620 satellite CD. Anyone know what model of memory I can install?
  Thanks and sorry, but my English is not very goog. I am Spanish.

  Hello

  I discovered that these RAM modules are compatible with your device:
  128 MB - PA3005U
  64 MB - PA3004U
  128 MB - PA3005U
  32 MB - PA3003U

  Good bye

• Which module memory for Satellite Pro M70?

  Hello! First post here, happy to join :)

  So, here is my question:
  I have a laptop M70 and want to upgrade the memory from 512 MB to 1 GB. I checked Toshiba online store and found that in fact 2 memory of 512 MB with the same characteristics (512 MB PC2-4300 DDR2 533 MHz) are supposed to do the job...
  The only difference is that the PA3412U - 1 M 51 is mentioned as "dual channel" and the PA3412U - 2M 51 is "RoHS compl.

  So, what is the good? Another problem is that I can not really get any of these two because the first one is "sold out" and the second is 'exhausted '! Laughing out loud

  But finding the correct for my system is a good first step, in my opinion. Thanks in advance! ;)

  Hello

  In this unit are 2 slots available and you can upgrade the memory for max 2048 MB (2x1024Mo). You can use DDR2 memory modules.
  I found information on the modules of memory support

  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  I would recommend to google for this part numbers and I m you will find an online store that offers this module.