Similar Questions

• Question about satellite for MAC via IEEE 1394 connection

  Hello

  I have a laptop Equium I have connected to a box of OS x via Firewire to transfer files and use the functionality of the Macintosh to share Internet via IEEE 1394. Someone can tell me why, when I plug the Firewire cable, WinXP detects a new device that doesn't have a driver for the laptop?

  The Firewire device is already installed and seems to be working properly before plugging in the cable.
  Thank you!

  Hello

  Sorry, but I have never tried to connect a Mac with a Windows unit.
  As I know the Mac operation use another file as units of Windows mode.

  Usually, the best way is to use a LAN cable and not a firewire cable to connect the two computers. Firwwire does not support the IP or / and TCP protocols.
  In this case I don't know how the conection it works without all the protocols.
  However try to connect the devices via a LAN cable.

  Please also see this page:
  http://developer.Apple.com/

• New HD graphics for mac beginning of 2008 pro card and a new screen

  Hi, I am looking to update my HD graphics card and buy a new HD screen, I hope you guys can help (I am based in the United Kingdom)

  I see (after doing some research on this forum) that operating systems seem to be important as well anything else.

  If my installation is:

  -OS X 10.8.5 (must keep this for stability problems)

  -Current is card ATI Radeon HD 2600 XT 256 MB

  -Mac model is 3.1

  You are not sure if we need more information on this stuff?

  I currently run a Sony BRAVIA and have other devices connected to it - Blu - Ray, Xbox.  It would be great to get a new monitor too and have enough connection to have all this always running as well as the mac.  I don't know if it's possible, because I don't know how the graphics cards these days above to connect to monitors.

  Help on that would be great.  I was able to get this old beast to keep improving in terms of storage and performance.  It is the missing piece of the puzzle for me.

  Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)

  A lot of PC cards will work but you do not get a splash screen, but you can use your old card if necessary

  http://forums.MacRumors.com/showthread.php?t=1440150

  It is a good list of Mac-Flash cards. Not cheap

  http://www.macvidcards.com/index.html

• Question about support for LabVIEW DLLS and Unicode

  Hello

  I have a question about LabVIEW and DLL functions calls.

  I use a DLL (sorry, I can't share it) that was written in C. It was written to support Unicode and non-Unicode function calls.

  The Unicode function is valid, then FunctionNameW is called if FunctionNameA is called.

  I am building a few VI to access the library. I have the regular functions of FunctionNameA work.

  My question is, does LabVIEW support versions of function FunctionNameW Unicode, and if so is it necessary Although LabVIEW is already working with the standard function call?

  Am I being redundant or what should I build in Unicode support?

  The first time I tried to test the Unicode functions, I had an error, and I guess this is a system setting.

  Thank you for your time in advance.

  DB_IQ wrote:

  I don't think I have TO implement the Unicode, but I want if I can.

  For what I do, I think almost it is not serious. But I wanted to know if it could be used.

  The short answer is "Yes, you can do it."  However, it may open a new Pandora's box.  If you're not careful, problems and complications that can still spread to other projects that are not using Unicode!  It is better not to summon this monster unless there is absolutely no other way to do the job.

• Question about encryption for a VPN established between two of our sites

  We have two routers Cisco 2951, one at our main location and one at a branch.  An engineer for a local company came and worked all the parameters, including the VPN between the two men.

  For an upcoming exam, the firm wanted to know what kind of security/encryption has been implemented between the two routers.  The engineer is no longer available, so I've went over our configuration files for each of the routers and will have questions about what to tell them (I'll be the first to admit that some of this stuff is over my head).

  I enclose the portions of the configs with "crypto" information he put in place.  If you see something wrong, or need something extra, let me know.

  Thanks in advance!

  That's what you use:

  Phase 1: 3DES, SHA1, PSK, Group2 DH (1024 bits), life time 86400 s

  Phase2: 3DES, SHA1

  Which is today considered legacy crypto, but probably nothing to worry. The crypto-config has always considered that there is "room for improvement"...

• Question about ReadyCLOUD for the Mac Client

  Hello

  I have problems of synchronization with ReadyCLOUD.

  After investigating the newspapers, this is the error I get for any file:

  2016 06-20; 08:05:39.6; [4032]; [7] ; E; Task failed, reason: , system error:

  Anyone know what could be the cause of this?

  Thank you

  Hi Brian,.

  I solved this now... I moved the content to another share and deleted the original and synchronized with the client.

  He now works very well.

  Thank you

• M30-832: Questions about memory and DVD player

  Hi all, new to laptops up to have a few questions! First of all, I have a Satellite M30-832.
  1. He has on the dvd player on the side of the Compact disk with re-writable below image and sign dvd R/RW under. That means it is a DVD burner as well? It does not sem to recognize blank DVDs and I was under the impression that it should be possible to write about them!

  2. can I upgrade the memory with memory DDR - RAM modules or does take a special type? And how to change them!

  Thank you very much

  Hi Richard,

  From what I can find your M30 832 is equipped with a DVD burner so you should be able to burn DVDs (the specification says you can only burn at X 1 speed for DVDs).

  You should be able to update your RAM to a maximum of 2 GB and I recommend you buy a quality mark to avoid any problems. Your user manual should have details on how to change the RAM modules, but generally it will be to remove a panel of access (usually on the bottom of the unit) and then releasing it two clips (one on each side of the RAM modules) plastic spring-loaded and gently raising the output modules.

  Please make sure that you either wear a wristband anti-statuc dirt or this earth you yourself before accessing RAM modules. They are very sensitive to electrostatic.

  You can find suppliers of RAM suitable if you GOOGLE 'M30 832 RAM.

  HTH)

• questions of memory for laptop HP ENVY 17-J099EF E0Z72EA

  Hello

  I just bought an HP ENVY 17-J099EF with Windows 8 64-bit laptop and I am a little puzzled about the DDR3 memory.

  It was delivered with a memory DDR3 8 GB (2 x 4). The number of portable computer product is E0Z72EA #ABF

  -I can't find the exact memory type anywhere. What is 12800 1600 Mhz @ 1.35v OR @1 .50V PC? The tension is important between 1.35 and 1.5V?

  -Is it possible to spend 8 GB (2 x 4 to 16 GB (2 x 8)) or 8 GB is the maximum memory?

  -Finally, if it is possible to upgrade to 16 GB, which is the ideal CL and 11 11 11 28 ok or I can take for example 9 9 9 24 without any damage?

  Thank you very much for your answer, I can find nothing converning these questions on the HP site or on the Internet.

  Kind regards

  Henry

  Hello

  Please visit the following site and ask it scan RAM on your computer. It will show you what you need:

  http://www.crucial.com/

  You can buy from them, or use the information to buy elsewhere.

  Kind regards.

• Question about memory on the Satellite A100-599

  Nice day

  The reason for the question is that Rectron South Africa said that the A100-599 comes with the memory modules 2x512mb and not with 1x1Gb as indicated on the Toshiba site. Rectron advice for the purchase of 2 x 1 GB memory but not refund not 2x512mb memory, thus leaving pay you 2 x what you will actually use.

  Please just confirm the A100-599, sold in South Africa are indeed with 2x512mb or 1 GB as shown on the site.

  Thank you
  IAM

  Hello

  The A100-599 seems to be sold in European, Middle East and Africa.
  I think that the laptop came with 1 GB memory module in a slot.
  The second location of memory should be free.

• Tecra 8000: questions about memory, mouse and screen

  Hi, im using a tecra 8200, mouse keeps drifting upward left after 30 minutes? keyboard problem?
  Sometimes the screen displays changr, from very dark then normal?
  Finally I was told that I can put in a module of 512 mem alongside 256 existing will this work.
  Thanks for any reply Biffo

  Hello

  As you know on this path it is not easy to give you a good answer on all these problems. The same happen to me with my mouse, but AFAIK it's normal because the mouse must obviously be calibrated again and again.

  Daniel is right about the memory. You can use two modules with 256 MB (PC100 256 MB - PA3069U - 1 M 25). 512 MB should be max according to the specifications of this unit.

  Good bye

• Questions about memory upgrade HP Pavilion 13-B080SA

  Hi all

  Recently, I bought the laptop above which came with 4 GB of memory.  I want to upgrade the memory up to 8 GB I have run a Windows VM in Linux and will require more then I have.  I was wondering if someone could please tell me how much memory slots that laptop has and what a memory, I need to get to 8 GB.

  I had a glance on the HP site and am not able to find all the information about the amount of slots on this laptop.  It would be nice to have 2 slots like that I can buy a single 4 GB chip instead of replace for a 8 GB.

  Is also the currently installed memory compatiable with the brands of spare parts, HP uses something different which will cause problems?

  Cheers in advance,

  Magnet light

  Hello

  Currently she has 4 GB in a dwelling, you can add 4 GB to another location to make 8 GB:

  2 SODIMM slots DDR3L - 1600 MHz
  Support for DDR3L-1600 MHz
  Dual channel support
  Maximum memory supported on-board 8096-MB system

  The BEST option is to buy the same brand and features of the existing to have RAM the best of both worlds: compatible and double channel. Many after market barnds may not work with your computer. THS first manual from the following link shows you the part number and how to replace RAM on your machine:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=7255412&

  Kind regards.

• Question about the possible use of MSVC 2008 Express as an external compiler CVI 9.0

  I was looking for these messages looking for information on the use of the ICB with external compilers, especially from MSVC 2008, and I came across this ad are about 4 months:

  "CVI 9.0 and MSVC 2008 express.

  The title of this announcement means that the freely downloadable 'express' version of MSVC can be used with CVI 9.0, but the body of the message is not in the details.  But I would really like to know if this is possible, and I'm guessing there are others here who could be very interested as well.  Page 8 of the CVI 9.0 release notes does not indicate that the Express version is supported, which makes sense.  I say this because I always thought that "express" versions of the MSVC were only to create .NET applications (C + c++ / CLI) and applications not native to Windows.  Or does change with the release of MSVC 2008 Express?

  There is no hurry to answer...

  JB

  If you have a CVI 9.0 FDS(I'm not sure about the BDS)

  Select Options/Build Options

  Select the Select button to the right of 'compiler active'.

  Click 'new' to create a new configuration of external compiler

  Select MSVC 9.0 as a model.

  Choose a configuration name (what you choose to CVI) and a destination file (where the external compiler settings will be stored).

  Click OK

  After that, you can easily select the optimizing level and the level of warnings that you need through the "Edit" in the box "compile to realease configuration.

  Kind regards

  Nicolas

• question about size for android devices

  Hello, I created an app for the ipad and I want the same app for android, my question is about the size.

  What zize I must set in indesign to create the application for android devices? or can I use the same (size of the ipad) and the app will be resised for all devices?

  Thank you

  If you are using 1024 x 768 and PDF that should work for almost any device of Tablet.

  You can visit this page for compatibility with non - iOS feature devices: http://helpx.adobe.com/digital-publishing-suite/help/supported-feature-list.html

• A Question about catalyst for a fool to programming

  I don't know anything about programming and I don't want to. I am a photographer and videographer. Programming is not my thing. That being said, I have messed around catalyst and I love how it is easy to make nice looking pages interactive and such.

  Now for the question. Can I use just the catalyst (as in any other software is necessary) to build a website for my company or I need, say, Dreamweaver too?

  So, can I build a Web site using only Flash Catalyst.

  Thanks in advance.

  How Adobe Flash Catalyst advertising, is that you don't need to know programming. I still run across problems where the only way to go into the code and change it. So, my impression is that simple Web sites can be designed using Flash Catalyst or it can be used for more complex interfaces quickly prototype which then need to be filled in the code section.

  Yes, you can design an entire website with Flash Catalyst. That's what I intend to do (with some codes html in addition to him) with my Web site. You initially design in Photoshop or Illustrator.

  I hope this helps.

• Is anyone DIY added more memory for Mac Mini mid 2010

  MY Mac mini mid-2010 is very slow.  I have 2 GB of memory and would like to increase it.  Can I do it myself or do I have to make to someone professional tech?

  It is very easy to replace the RAM on a Mini from 2010-2012. See the videos:

  https://eShop.MacSales.com/installvideos/mac_mini2010/

  Make sure you get only the memory of a place as above which guarantees that proper operation with your Mini. Macs ae picky on memory.

  https://eShop.MacSales.com/shop/memory/Apple_Mac_mini/DDR3