What is read maximum speed of 6343 DAQ USB

Similar Questions

• Envy TouchSmart 17-j153cl: maximum speed DDR3L RAM in HP ENVY 17-j153cl

  Hello!

  I currently have the Touchsmart from HP Envy 17-j153cl with a BIOS updated. The vehicle has currently 2x8GB sticks of RAM SoDIMM DDR3L strips - 1600 MHz. I was wondering what was the maximum speed of RAM supported by the BIOS. I'm hoping to upgrade to Kingston HyperX 2133 MHz SODIMM 2x8GB DDR3L, but I heard that if the laptop BIOS does not support the higher speed, it is just downclocked. So, I wanted to know if bios default HP on the 17 - j153cl can handle the speed of the potentially new RAM. Thank you for your help.

  Sincerely,

  MajGenRelativity

  (P.S. I can't understand how do I change my forum of MajGenRelativit tag, so a response that makes you earn bonus points )

  MajGenRelativit wrote:

  Seems like a stupid question, but I thought it was worth asking. If I install a 3rd party BIOS, if I cancel the warranty. I'm only this interested in upgrading the RAM because...

  Hello

  1. This permanently cancels the warranty. Are you sure that the machine allows to do this?
  2. I have some older posts to talk about RAM. I usually use the car for example. You can run a race car at high speed on a race track, not on normal/streets roads; especially on roads with speed limits.

  Kind regards.

• IdeaPad S205 RAM/memory: maximum speed?

  Hello

  Lenovo customer service/tech support I asked this question several times, each to give me an answer to 1066 mhz.

  What is the maximum SPEED for the RAM/memory usable by the S205 with AMD Fusion the E450 processor?

  I understand 8G (2 slots of 4G) is the maximum capacity of ram.

  But what is the maximum speed of the ram? I thought that the maximum allowance is 1 066 mhz due to the site, despite the AMD website, saying that the E450 can manage 1333 mhz.

  Obviously, I want to max out my RAM. I went on the site of Kingston and used the option to locate specific RAM for this device and it gave rise to 1 066 mhz 2X4G sticks. So I bought and it just. I just want to come here and see if someone actually KNOWS what as the maximum speed capability (or anything else I should be aware of outside Gig capacity) which can take the S205 with AMD Fusion the E450.

  EDIT:
  In new research, I found the following.

  (1) according to the support of crucial technology, the RAM frequency/speed is controlled by the processor CPU only. And as said by him, the AMD 300 and 350 have a maximum speed of control for the RAM of 1066 mhz. However the E450 has a 'controller memory integrated (up to 1333 MHz) DDR3"as seen go ( http://www.lenovo.com/shop/americas/content/pdf/system_data/s205_tech_specs.pdf ).

  Also note that just below him, he goes on to say that the maximum speed for RAM is at 1066 mhz. Therefore, this disturbs more the issue. It seems to me that, when they are max memory capacity and speed, they forgot that the E450 can manage more of the E300 and E350 and simply serve their maximum speed of 1066.

  I already went ahead and bought 2X4G 1066 RAM. Fortunately, I did not open them. But now it comes to ship to the company and having to order the good 1333 mhz RAM. Otherwise I use RAM that is slower than my full potential.

  I advanced and called Lenovo and it brought to their attention. After the daughter of back and forth between 1066 and 1333, she decided at the end (of course assistance from their technical support level 2) 1333 is maximum for E450.

  Conclusion:
  It seems that if you have E450, you may have to 1333.

  If you have E300 or 350, you can have 1066.

  If anyone has confirmation, please tell.

  If you go to the Lenovo support site and enter the serial number of your S205, if will give you a list of all the machine components (including the RAM module manufacturer, size, speed, etc.).

  The manual indicates that the specification of RAM for my S205 1066.  By entering my serial number, I found that Lenovo had actually installed 1333 RAM in my system.  Then, when I added more RAM, I knew to add 1333 instead of 1066.

  No, I didn't bother to check my actual speed of the RAM.

• Maximum speed of read/write taken supported Sony Xperia Z2 for MicroSD cards

  I am looking to buy a microSD for my Xperia Z2 phone (6503). My question is: how fast it can write data to an SD card. For all I know, these speeds are dependent on the controller of the SD card. If I'll know it approximate numbers I can acquire an adequate microSD card. Right now I'm trying to decide between: SanDisk SDSDQX - 064 G-U46A Extreme Plus 64 GB - 80 MB / s GB SanDisk SDSDQUA - 128 G-G46A 128 Ultra - 30 MB/s write for these microSD cards speeds half accelerated indicated reed are numbers. I like 128 GB Ultra card capacity, but would not hesitate to buy faster 64 GB card of more extreme.

  If you use 4K as recording features, you may need to get a high speed SD! (go to the Maximum speed you can)

  So I think that like extreme would be preferable in this case, but if your phone is what use you (like me) the maximum capacity (which has better speed as well, if not useless) I use a class 10 128 Go!

  Like many, I know, I think that same 30 MBP will be sufficient for a 4K video!

• How to speed up loop DAQ triggered using NOR cDAQ-9174 with NOR-9215 and NOR-9402

  Hello

  I use LV2010 and NOR-DAQmx 9.2.2. I have a NOR cDAQ-9174 with a NEITHER-9215 4 channel 100 k simultaneous ADC and NOR-9402 4 channel DIO module trigger and reset.

  We run WinXP sp3 on a Dell M4400 core 2 duo @2. 26 Ghz.

  I used the code example NI DAQmx for acquisition of tension with trigger HW. My goal is to try all 4 channels on the 9215 simultaneously when a trigger is received on channel 0 of the 9402, after data is read, I use channel 1 on the 9402 to reset the trigger of the target material.  I have a version of this work, however the maximum event rate is ~ 16/second. I have the Setup 9215 for finite samples / 10 samples per channel which is ~ 400uSec of conversion time and I realize he is above in the appeal of vi, but ~ 50mSeconds worth?

  The target detector can put out up to 1 k / event triggers / seconds.  Only, I received a rate of 8 per second and I added the NOR-DAQmx control vi driver and chose "commit" this did double the rate.

  My question is what is the maximum rate of loop for these devices (trigger/conversion/reading device / reset) and start over? I noticed that just let free the 9215, carried out using the 'Acq & chart internal strain Clk' raised only the rate of events up to 20 Hz.

  Thank you

  normbo663

  Hi normbo663,

  You can get this works far better assuming you have an available counter (there are 4 on the backplane of the 9174).

  DAQ Compact supports the tasks of meter output "redeclenchables" that can be used to generate a finite pulse train.  You can set a task of finished meter redeclenchables output to be used as sample for your task of analog clock.  The task of the meter output will be re-Army (less than 12, 5-25 ns) as soon as it's finished out the last pulse.  The task of analog input would be configured to run continuously, but it would only sample based on the output of the meter triggered.  For an example, see here.

  You can reference the internal counters on the cDAQ without signals through a routing module using: cDAQ1/_ctr0 (right click on the chain counter control, then select i/o name of filtering and check channels internal to add these options to the drop down).

  Thus, with the tips above, you should be able to immediately re - arming your analog acquisition on the 9215 using one background basket counters.  It seems that the second half of the application is to use a second channel on the 9402 to reset the trigger of your DUT.  You can deterministically generate this signal so by configuring a 2nd redeclenchables meter out task (single pulse, but this time).  All you need to do is the initial delay on the appropriate value for your analog acquisition.  Trigger this counter on the same PFI line that trigger you your analog task from.

  Using counters to generate the signals you need in a deterministic way, the loop becomes is no longer a problem (as long as your input buffer does not overflow).  You may need to re-read several triggers at the same time for the loop to keep (for example to read 1000 samples each, which would correspond to 100 triggers 10 samples).

  Best regards

• Satego X 200 - 21U - after Eve: fan at maximum speed

  Hello

  I have a Toshiba Satego x 200 - 21u.
  I often use the mode "Eve". I close the screen with a wink, and the next day I still.
  Sometimes the fan goes crazy. It runs with maximum speed, as if it was too hot.
  When I stopped (no restart) and turn it on again, everything is fine.

  Is there a problem with a driver?
  Is it lack of Microsoft?
  Or is it really too hot? Y at - it a tool that shows me the temperatures?

  Thx for reading!

  Good day

  pAT

  You close the Notepad application with open or closed?
  This occurs if you close all applications before you use mode 'sleep'?

  When you write sometimes it is not easy to say why this is happening.
  Do some tests and try to find out when this happen.

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• Computer HP laptop-15-AY012DX: what is the maximum can RAM my HP for computer laptop-15-AY012DX going up?

  Hi all

  I lost my manual book and I have a problem to find the what is the maximum can RAM that my HP for computer laptop-15-AY012DX is going up? Your help is appreciated.

  Thank you and best regards.

  Hello

  According to PartSurfer your laptop has DDR4, read it again:

  http://PartSurfer.HP.com/search.aspx?SearchText=X0S24UA

  http://h10032.www1.HP.com/CTG/manual/c05087748

  Memory module (PC4, 17000, 2133 MHz)
  For models with 6 processors Intel Core of generation:
  8 GB 820570-005
  4 GB 820569-005
  2 GB 851379-005

  Two non-customer-accessible/expandable memory
  housing for module (Intel processors)
  Supported dual channel DDR4-2133

  Supports up to 16 GB of RAM in the following conƭgurations

  16384 MB total system memory (8192 × 2)
  12288 MB ● total system memory (8192 × 1).
  + (4096 × 1).
  ● 8192 MB total system memory (8192 × 1) or
  (4096 × 2)
  Total 6144 MB ● system memory (4096 × 1).
  + (2 048 × 1).
  ● total 4096 MB system memory (4096 × 1) or
  (2048 × 2)
  ● total 2048 MB system memory (2 048 × 1).
  Two non-customer-accessible/expandable memory

• What is the maximum screen resolution for a 201 X (t) via X 200 ban & Displayport?

  Since the X 201 (t) has such a small screen (when will we finally see tablets with 1400 x 1050 screen resolutions or even 1600 x 1200?) Manufacturers - wake up!) I plan to buy a large external screen.

  But what is the maximum that a 201 X (t) can lead by the Displayport 200 X of the ban? I couldn't find any reliable information on that and the installation program does not say, as long as there is no such screen attached.

  I read somewhere that it is capable of 2560 x 1440 pixels. Sounds great, but I have some doubts, that it is indeed the case. Could someone using such a screen please confirm that? I don't want to buy me such a screen high resolution just to watch some blury, set on the scale of resolution 1600 x 1200 (or other). Integrated graphics is actually capable of managing this resolution and this resolution will then be just unbearably slow?

  Michael

  the displayport can lead a monitor 30 inches of WQXGA (2560 x 1600) resolution in its native resolution using either the displayport or if you use an active displayport to dvi converter dual link.

  If you are not running any games or other graphics intensive programs, the X20x can drive the resolution max is very good.

• Download/Download blackBerry Smartphones Maximum speeds?

  I have a BB 9700 "BOLD". I was testing the speed of data transfer using an app called "NetWorkSpeed" on the app store. No matter how fast my network connection has been, it seemed that the bold has been capped at a maximum speed of about 250 Kbps, two additions or downloads. It's using a 3G connection, or my house Wi-Fi. My House Wi-Fi should be able to make downloads of 6000 Kbps and 800 Kbps post; but the "BOLD" has never led neighbors of those. Now, it is a test of speed that is done only to the device, not a captive computer or something like that. A captive computer seems to be able to transfer more quickly through the "BOLD", "BOLD" can transfer to himself. Is this a real limitation with the "BOLD", or something else going on here?

  BTW, I connected my PC to my "BOLD", use the "BOLD" as its modem, and I could get 1.9 Mbit/s/330 Kbps with it. Not as fast as my home Wi-Fi, but respectable. But much, much faster than the Blackberry can transfer to himself.

  Due to the complexity of the entire network of BlackBerry service, and how it works through RIM servers, make it difficult to calculate the speed of transfer. Unlike all other phones, all data from one blackberry phone go directly to RIM servers, then to where she was originally meant to go. So to reduce the amount of data, RIM is approaching the excess data, which are used by speedtests to calculate speed. This results in low transfer rate calculations.

  The 3G speed is based on the network.
  The speed that show you are much lower than they should be. He speedtests lots are not available for BlackBerry phones. I remember using 1 Web site specially designed to calculate rates for blackberry phones and it capped download speeds to 500 for everyone over 3 G, but on wifi, it showed almost 80% equal to what was the broadband speed.

  I'll try looking for this link.

  RIM: Research In Motion, the company that makes BlackBerry.

  I hope this helps.

• What is the maximum. Height of page PDF?

  I use Jasper reports to create PDF reports, and I found out recently that for some files larger in content I can't open them correctly in Adobe Reader, but they work perfectly in other PDF readers.

  More exactly, what I see, Adobe Reader inter change just the width and height of the document.

  I found a 'solution', by reducing the height of the report page (which was more than 15000). If I put it at 14200, can I see the report, but the lower part is missing.

  My question is, what is the maximum height for a PDF document in order to be readable by Adobe, and if I can "do something". (P.S. 14200 comes from what I consider the dimension in pixels).

  According to the ISO PDF reference, the maximum page size is 14400 x 14400 points.

• MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

  MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

  The following is from http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i5-2.5-13-mid-2012-unibody-usb3-specs.html

  In addition, the 6 Gb/s it is SATA III

  Standard hard drive:

  500 GB (5400 RPM)

  Int. HD Interface:

  Serial ATA (6 Gb/s)

• What is the maximum size of HARD drive, I use in my dc7600 CMT

  I use a HP dc7600 CMT, which works well after the upgrade to a Samsung 128 GB SSD Intel Pentium D 3.4 GHz, 4 GB of RAM and an AMD Radeon HD 6450. I'm under Win 8.1 Pro x 64, with the most recent upgrade and have absolutely no problem. Now, I want to add a second internal HDD and I wonder what is the maximum size that I can go to. I can't go up to 2 TB, or am I limited to a lower number? 1 TB? 500 GB? 250 GB?

  Will be happy to help here, especially if he actually tried to apply in practice.

  Thanks in advance.

  Best regards

  Hello:

  In theory, you'd be limited to 2 TB.

  The biggest HARD drive I have ever installed in my dc7600 CMT was a 1 TB of HDD, so I can't confirm that a 2 TB drive will absolutely work.

• HP dv7t-7300 ENVY: what is the maximum memory capacity dv7t-7300?

  I am trying to upgrade RAM on my PC HP ENVY dv7t-7300 CTO Quad Edition laptop. What is the maximum memory capacity for this model?

  Thank you!

  Gena.

  Supports the following memory system configurations:

  16384 MB (8192 MB × 2; not the supportedon computer models, equipped with 32-bit operating system)

  12288 MB (8192 MB × 1 + 4096 MB × 1; not supported on the computer modelsequipped with a 32-bit operating system)

  8192 MB (8192 MB × 1 or 4096 MB × 2; not supported on the computer modelsequipped with a 32-bit operating system)

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c03591253

  REO

• What is HD-maximum capacity for Satellite Pro A40?

  Hello together,

  I got a (PSA45E) Satellite Pro A40 and now I need a new hard drive.
  My question is now, what is the maximum capacity for a hd you can plug in and are very by the BIOS?

  Thanks in advance.

  Doc

  Hello

  I think this old laptop HARD drive with IDE interface, so I think the upgrade up to 120 GB should be possible. I think that 80 or 100 GB should be enough for this good old classic.

  I hope you aren't the guy who wants to have 500 GB. :)