Maximum speed of read/write taken supported Sony Xperia Z2 for MicroSD cards

Similar Questions

• a speed of read/write DAQ card mode change will reach 200K

  HEY, man,

  I have a project needs to test two points I name them point A and point B, the first time, I should point A 5V DC input, voltage inductive test point B, sencodly, give point B 5V DC input and inductive point test output voltage, this means and two analog ports must read and write sharing mode , and the test speed must be 100 KB, if I have a 200 KB data acquisition card, can the speed of read/write mode change reach 100 KB for an analog port? or, please give your suggest for my this kind of situation, thank you.

  Hi API,.

  I see that you are trying to measure voltages using a single channel at a time on a data acquisition card.

  Unfortunately, you cannot change the inputs to the outputs or vice versa on a map of data acquisition, they are static.

  What I recommend is either using a switch like this: http://sine.ni.com/nips/cds/view/p/lang/en/nid/207130 where you will need a high chassis.

  Or, having four channels, 2 inputs and 2 outputs and try to measure it. You should have the necessary speed as well.

  If you have any other questions, I'd be happy to answer.

  Thank you very much

• How do you know the speed of read/write of a flash drive?

  Who knows a program to read/write speed?

  Hi Cristi,

  Thanks for posting in the Microsoft Community.

  An indication of the standard flash drives read/write speeds is the following:

  USB 2.0:

  Sequential write speed range = 4-10 MB/S

  Sequential read speed range = 15 to 25 MB/S

  USB 3.0:

  Sequential write speed range = upto20 MB/S

  Sequential read speed range = upto45 MB/S

  These reading and writing speeds offer a guide to the read/write Flash Drive performance and have been identified in recent tests. Please note that we are changing the components USB Flash Drive at any time based on the availability and cost. This means that the read/write speeds above cannot be guaranteed.

  You can use your favorite search engine to search for this application that measures the speed of read/write of flash drives.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Sony ILÇE-7R - what is the speed of read/write in the camera

  I have several Sony ILÇE-7R cameras used for a given application where more than 80 panes in a row with 1 second interval occur.

  When you are taking pictures on a 1 sec shutter time / 1.2 s, then the camera tends to slow when writing the buffer on the SD card. (A suitable high-speed sdcard has been used).  When the buffer is disabled on the SD card, then the camera accepts no any command of the shutter (IR Led or cable gives the same question), so I'm missing components/images.

  What is the read/write speed in the camera?

  What are the compensation of buffer time?

  Are there settings that can improve the buffer time on the SD card, while taking still pictures of compensation?

  Is there firmware settings that have been implemented to improve the write speed camera?

  Thank you very much

  Kind regards

  
  

• Sony xperia z3 compact sim card cover flap

  Someone in the United Kingdom can point me in the right direction on where I can find an AUTHENTIC, not a copy, the hatch cover Sony for my white Xperia Z3 Compact sim card?

  My origin is tired, to be honest, very bad quality for such a premium brand phone, especially when Sony knows that open and close whenever it needs to be recharged (I do not use the magnetic contacts for recharging).

  Thank you

  Thanks for the tips, I had already looked at Amazon (not those who are authentic not found).

  Contacted Sony repair... NO WAY on this planet you I send my phone them for such a small article, which could be easily sent to me.

  I found a couple of those who are genuine on ebay, arriving tomorrow.

  Bought a couple, because I know that the flap will again later.

• increase speed visa read write

  Hi guys,.

  I use the visa read and write the example, but I am facing a problem when using it in a software expansion, and I can receive only date when the vi has been slown down (using the bulb).

  The program really works on her own with the defined settings.

  So, do you have any ideas/suggestions on how to significantly increase the speed of this vi (joint)? In addition, it seems to create a problem with the playback of data

  Thank you very much

  Kentmey

  Roll bytes to the port and the delay.

  Rely on the chariot of the termination

  Use a number larger than the bytes expected.

• Maximum latency to read/write for PCI-DIO-32HS with NOR-DAQmx?

  I was asked to evaluate using the PCI-DIO-32HS and NOR-DAQmx on MacOS X to essentially close a control loop.  My first concern is whether or not it can run fast enough.

  So my questions are: what is the maximum latency from the moment of receiving a signal strobe reading data from external hardware, then read a single 16-bit sample and sending it upward by NOR-DAQ to a user space application?  And, similarly, what is the maximum latency of sending a unique 16-bit value from a space application user down through NOR-DAQ, then write a port and affirming a strobe signal of external-data writing material?

  Thank you.

  Hi AliasMe,

  Thanks for posting and welcome to the Forums EITHER!

  Do you need to process the data in the software and generate a value on this basis?  DIO-32HS (alias PCI-6533) offers in the buffer of inputs and outputs, but you'd have a latency in your control system relying on the OS to do treatment.  Since this period is dependent on the system, I can't give a specification for the amount of time it would take.  However, integrating data in memory, processing and writing back to the card would likely be on the order of several milliseconds.

  Generally, we recommend FPGA in situations of control like this, so you can do all the processing in hardware.  However, if provide you more details on your request we can look into all the options available.

  -John

• SQL Server 2005 taken supported Versions/Patch Release for FSCM, HR & LM, etc..

  I'm not a PeopleSoft Developer :) I'm a new SQL Server DBA focus on new :).
  
  I'm trying to find something that tells me which versions of SQL are supported and patch levels if the said documentation exists for PeopleSoft. A running SQL 2005 SP3 on all database PeopleSoft, problems? I am trying to get all of the SQL servers in our environment to the latest patch and want to confirm that it will be supported. I've not seen anything that says SQL2005 2.0.2035 or something like this only generic SQL 2005.
  
  Thanks in advance,
  Matt

  There is specific documentation in support of the website metalink3, if you have access, click on the tab 'product Certifications.
  In any case, it seems MSSQL2005 without or with SP1 or SP2 are supported with in 8.48/8.49 Peopletools, nothing on SP3.

  Nicolas.

• Sending a video of the Sony Xperia (LT26) for computer

  Using Windows 7, how to download videos from the Mobile phone to the computer?

  I tried clicking on icon USB connection, but it does not work.

  Thank you for your kind reply.

  Yes I had already downloaded the appropriate application and have successfully on my first attempt, that lists the videos and photos from my phone to my computer.

  Thanks to the Chatline online from Sony and a panic/attack later, I have now found videos that didn't copy on my computer folder Video when I click Download photos and videos from the Mobile phone (of course once they are downloaded, they don't download again).

  Then my last attempt, the images downloaded perfectly, but I couldn't find the videos taken.

  IT IS THAT I HAD TO DO TO FIND THE DOWNLOADED VIDEOS.

  With the phone Xperia connected to the computer

  Click Start incontinence

  Click computer (right panel)

  Click on Xperia (the phone must be connected to the computer for it to appear on the left panel)

  Click internal storage
  Click the DCM file and they should be in this area.

  Thanks a lot for your answer.

  Miss G :)
  PS. Sony instructions Chatline online gave me helped me, but also were confusing.
  However, he showed me in the right direction to find the videos.  '
  Once I found them, I copied then those I wanted to the computer by clicking and dragging the videos to my computer folder Video.  It then copies the video perfectly.

• In the target FPGA read/write control function?

  Hi people,

  I learn a lot from the sample project FPGA, including how you can easily retrieve and set controls and indicators in an FPGA using the read/write control function running in an RT target.

  However, I can't find a way to do something similar in a FPGA target.  I've been down this road before - that is, trying to move the data in/out a looping VI FPGA (void) to a (parent) FPGA VI - where my memory points to reach what I needed use.

  So I was happy to see the palette FPGA enabled me to drop the control functions to read/write on a FPGA vi target.  But alas there where tons of errors (not compatible son for target, etc.) and I guess now it's not possible.

  So, just to be sure, I'm not missing something, is there something like control functions to read/write to use in an FPGA for read/write in an another FPGA (looped)?

  In addition, why would I be able to read/write on a FPGA vi control functions if they are not supported?  (Sorry for the n00b question)

  Thank you

  Steve

  maherhome wrote:

  You're right that I don't have this knot in my palette.  However, I also do not seem to have a Refnum Occurrence in the palette is in the FPGA (see below), but I need to synchronize several loops of FPGA and added research using the textfield in the VI editor (and if compiles and runs).  So 6 months to Labview and I'm fuzzy on how the palette is restricted

  I don't know what you're trying to prove here. There is no control of refnum in search in your image. Occurrences are available in FPGA, and for control of refnum for one you just right click on a function of the instance and create a control. If you can create a valid thread of a certain type of data, then you can create a control or the indicator for it, regardless of the question to know if this type of control or indicator appears in the palettes. However, the functions that you can use in the block diagram are limited by what is available in the palettes.

  maherhome wrote:

  Regarding orders read/write for the FPGA/lights, I'm surprised that the infrastructure developed to allow read/write between RT and FPGA has not mobilized to allow read/write between FPGA and FPGA.  The elements of memory function, but they are less convenient.

  You may have noticed that you cannot compile the individual parts of an FPGA VI and combine them later; This is because when you compile an FPGA VI, all its subVIs are essentially merged to create a single block diagram (with additional logic if one not reentrant Subvi is used in multiple locations, this is why it is not recommended on FPGA). The subVIs no longer exist in the FPGA compiled; reading and writing a control on them would make no sense. If you want similar behavior, use global variables - but understand that global variables store values in FPGA logic resources. Using the elements of memory (or FIFO, which can also store in memory) leaves more fabric available FPGA logic by storing data in resources specially designed for this purpose.

• SSD Ultra II read & write speed problem

  Hello world

  I'm hoping to get help please about an SSD, I just bought and do not seem to be getting anywhere near the advertised speed it is supposed to be able, I only spent by technical support yet as thought someone here might know the answer.

  I bought the Ultra II capable of up to 550 MB/s write in reading and 500 MB/s, but after doing some 480 GB testing the 3rd party software and the State of SanDisk my speed to read dashboard is about 346 MB/s and writing is about 236 MB / s, is not anywhere near the announced speeds.

  I made sure the drivers are up to date in the dashboard, checked my motherboard and confirmed he has 2 SATA2 and SATA3 2 ports, bought new cables SATA 6.0 GB of data and made sure that they are plugged on SATA3 ports using the manual of the motherboard, but I get still only these slow speeds.

  Any help anyone can offer would be great, thanks.

  What is the MB brand and model? Some MB have several SATA 6 GB ports on different controllers. Intel SATA chipsets tend to perform best. I have a MB with Intel and AS Media SATA 3 chipsets and I see the same performance you see if I connect an SSD SATA 3 ports that use the controller AS Media.

• Why Photoshop doesn't support read/write of files .mpo?

  I'm really blown away that I can't find a single plugin of Photoshop that reads and saves .mpo files. Does anyone know why? And why isn't anyone talking about this format? I struggle to believe that nobody in the entire Photoshop Windows forum asked already on a total lack of Photoshop or an interest in support for .mpo files.

  If nobody knows how read/write the file .mpo directly through Photoshop, maybe someone could point me to resources for writing a plugin for this. It's a file format really very simple: there is no reason that a plugin must not already be available.

  Thanks in advance for your support.

  Jase

  Well said. In the end, it comes to the number. Development costs $, and if there is no hope to recover this cost, I doubt any software company will jump to support FTU. Now, things can change, but this depends on the number. At the same time, AVCHD is not easily supported by most of the NLE programs. Soon, the number reached a critical mass, and most of the software companies jumped on this train running.

  With the availability of the PS SDK, if anyone recognizes the need and the financial justification for this plugin, I think they will write a.

  It was similar, when struck with JPEG - 2K. It was going to be the future format/compressor. It took time to seduce the good, but when he did finally, Adobe added support. Over time, it is rather fizzled. Now, if it's still around, it's probably like a ' Goodies > additional Formats ' plugin.

  If I was on the Board of Directors of Adobe (or any other similar software company), I would ask to see the numbers, before I give my vote to continue the development.

  Fuji offers software for the DFO format? It works well?

  For me, it would be incumbent on Fuji to take the SDK and build a plug in PS, but I feel the same way on camera mfgrs., rewriting of the CODEC for video, who do not care to offer a such CODEC for editing. They leave THEIR pending clients, like the last leaf fall, in the wind. Were I have Fuji, I certainly would develop a plug-in for PS, the professional image editor more common on the Earth. They know their format, access access to the SDK and have a responsibility to their customers.

  Good luck

  Hunt

• Tecra A8 DVD don't read/write DVD-R 1-16 x.

  Using Sonic Record DLA, Tecra A8 DVD don't read/write DVD-R 1-16 x. Ok work on DVD - R 1-8 x and CD DVD - R 1-16 x has tested successfully on the two recent Toshiba Satellite Pro and HP Office. Have updated the Bios, software DVD-RAM and Sonic DLA.

  Hey,.

  What exactly do you mean? This means that you can t burn DVD-r with 16 x speed?
  In this case, you should check the specifications of your CD/DVD drive. Not all models support this speed of combustion. In addition, I recommend using 8 x only, he speed will give you a better quality of the burned data/average.

  You must also use different types of media. I believe that your other computers have different drives in order to test different mediums. I have a good experience with Verbatim DVD-R.

• Satego X 200 - 21U - after Eve: fan at maximum speed

  Hello

  I have a Toshiba Satego x 200 - 21u.
  I often use the mode "Eve". I close the screen with a wink, and the next day I still.
  Sometimes the fan goes crazy. It runs with maximum speed, as if it was too hot.
  When I stopped (no restart) and turn it on again, everything is fine.

  Is there a problem with a driver?
  Is it lack of Microsoft?
  Or is it really too hot? Y at - it a tool that shows me the temperatures?

  Thx for reading!

  Good day

  pAT

  You close the Notepad application with open or closed?
  This occurs if you close all applications before you use mode 'sleep'?

  When you write sometimes it is not easy to say why this is happening.
  Do some tests and try to find out when this happen.

• Help please! Do not read/write drive :(

  Hello!!

  My CD? DVD player doesn't read or CD burning Device Manager displays "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». I have tried uninstall and put it back in place, as well as the Sony firmware update. I also tried to remove the filters, but there are no filters listed on on it.

  Any suggestions?

  
  

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.