What is the acquisition card OR 1426 compatible with a line/Linear array scanner?

What is the acquisition card OR 1426 compatible with a line/Linear array scanner?

I'm currently doing a feasibility study of the project that uses the NI 1426 and a linear Array Scanner acquisition card, and I would like to know if they are compatible with each other.

Thanks in advance

Martin

Hi sandeepchinni,

I agree with gunnesjr that we need more information about what you mean by Linear Array Scanner.  As he said if it is a scan line or an area then yes it will most likely compatible.  A small correction to what he says.  You need not buy NI Vision if all you need to do is to acquire images.  The framegrabber will be delivered with the software that is needed to work.  If you need to do any image processing then you need NI Vision.  The following knowledge base lists what is installed with the driver for the card.  Live that are installed with OR-IMAQ Vision Acquisition Software?

Tags: NI Software

Similar Questions

  • What are the operating systems that are compatible with dreamweaver

    What are the attributes of Dreamweaver cs5 and cs6 but lack of wordpress?

    Your question is not related to your topic.  So I don't know exactly what you're asking, but I'll try to answer you as best I can.

    (1) DW works with Windows systems and Mac operating modern.  Versions vary depending on what version of DW you.

    System requirements | Dreamweaver

    (2) WordPress is a Content Management System (blogging software) used to create online sites.

    Dreamweaver is software web development of stand-alone for sites, blogs, shopping apps, apps, mobile, carts, etc...

    Nancy O.

  • Using the acquisition card in Labview

    I am considering the purchase of an NI PCIe-8242 acquisition card to go with my camera ace acA1300-200uc of Basler. I can't find any documentation on how to actually use the inside of a frame grabber Labview, and I'm very inexperienced with regard to the use of Labview. Anyone has any advice or tips on how I can use the acquisition card?

    For reference, I need start a video stream given a trigger to an different Labview vi, then take some pictures and save them to a directory on the computer in the first 30 seconds. I need to keep the video stream up to the end of the trial. But I can't save any video - only a few pictures.

    Thanks in advance!

    Although he needed the VDM, why would you recommend the duration?  He couldn't really use it.  It would be wasted money.  The only value to it is if you already have an application built using the VDM development software.  (which is more than one Service that is more than the card it looks)

    If you have no customer Service, certainly grab some cheap acquisition cards.  If you already have GOING, I would skip the tips here to blindly buy the card and test your USB3 ports prior to the purchase of surplus material.

    As far as how you would work with the BT acquisition card?  Really, you won't.  You will work with the camera that you plug in LV you won't see anywhere mentioned acquisition card.  In MAX, it'll be the camera.  In LV, you will use the resource name of MAX.  The acquisition card will just be additional USB3 ports.

  • I have a HP p6653w desktop computer and you want to upgrade the video card for gaming. What is the best card that my

    I have a HP p6653w desktop computer. Can I upgrade my video card and what is the best card to get to the games?

    mathenson,

    You can update the video, install any PCIEx16 card video and the new PSU (power supply).

    The general answer is based on the games you play. It is best to search for the site of the game, reading the recommended list 'graphics card '. Then add a little more.

    graphics card comparison site. http://www.hwcompare.com/6232/Radeon-HD-5670-vs-Radeon-HD-6950-2GB/

    Each graphics card is then looked up, noting the length of the card connectors (power cards) required recommended PSU.

    Example: XFX HD6950 2 GB:http://www.newegg.com/Product/Product.aspx?Item=N82E16814150530

    (1) two PCIE 6pin power wires

    (2) card 10 "

    (3) min 500W PSU, if you add up.  Your 250W + card + fresh 200W generals = 600W

    630W PSU will fix the wiring and size http://www.newegg.com/Product/Product.aspx?Item=N82E16817182200

  • What version of GarageBand's MainStage 3 compatible with?

    What version of GarageBand's MainStage 3 compatible with?

    You can use the loops and sounds of the Packs of MainStage, GarageBand 11 3 and 10 of GarageBand Jam.  MainStage will install this content in the same library folders where GarageBand is looking for them.

  • What type of wireless keyboard/mouse is compatible with a Sony Bravia KDL55HX750 TV?

    What type of wireless keyboard/mouse is compatible with a Sony Bravia KDL55HX750 TV? I am looking to invest in a secondary remote control / keyboard /mouse to take remotely wear off the original supplied with the game. Any help is appreciated! Thank you.

    Hi Kaz112,

    There is no compatible mouse or keyboard (wired or wireless) to any Sony TV right now however, USB keyboards can be used in players Blu - Ray from Sony (model specific).

    Thank you.

    > Joffrey

    If my post answered your question, please mark it as "accept as a Solution.

  • I still need a fax of legal documents. What are the options for p-1030 pavion with Windows 7?

    What are the options for p-1030 pavion with Windows 7.  I still need a fax of legal documents?

    I would like to add a modem fax boarding card.  Is this possible with windows 7 or HP?

    Linda, welcome to the forum.

    I suggest try Windows Fax and Scan (Control Panel / devices and printers / Fax) to see if it does what you need.  It allows to send and receive faxes without a fax machine.  When you click fax it will open and give you instructions on how to configure the application.

    Please let us know if this solved your problem or not.

  • Video card is not compatible with Windows 7

    Original title: video card

    My vga card is not compatible with windows 7. Card VGA on the motherboard. No expansion slot. Is there an external vga for a dell computer

    Hello

    Please contact the Microsoft community.

    To answer your question: Yes, there could be an external VGA card for the dell computer.

    For more information, you may need to contact the manufacturer of your computer or video card manufacturer.

    Dell manufacturer sites: http://Support.dell.com

    Hope that this useful information, if the problem persists please get back to us with the information in short so that we can help you further.

  • The 300 series switches are compatible with detection of PoE before standard in old phones Cisco?

    The 300 series switches are compatible with detection of PoE before standard in old phones Cisco? They don't seem to be (7902G don't turn on when it is connected to a SF302-08MP with firmware version 1.1). What no need special configuration on the switch to enable this detection?

    Please note that the switches of the series 200 and 300 are now supported POE Legacy Cisco from September 2011, to provide power to 7960, 7940 and other phones standard pre and APs. Details on the following link:

    https://supportforums.Cisco.com/docs/doc-18337

  • What android devices are supported? Not compatible with ASUS favorite with android 5.0.

    What android devices are supported? Not compatible with ASUS favorite with android 5.0.

    Dark salvation,

    Sorry for the confusion... Draw is not yet supported on Android tablets.

    Sue.

  • What version of developer costume oracle is compatible with windows 7 32 bit

    Can you get it someone please let me know what version of Oracle Developer suite is compatible with windows 7(32 bit). And please tell me the link where I can download this. I want to download this software to make the practices of Oracle Forms and reports by installing it on my PC.

    I had downloaded ds_windows_x86_101202_disk1.zip from the site of the Oracle, but during the installation it show the error msg in the newspaper as -

    ParamFile using: C:\Users\USER\AppData\Local\Temp\install\install\oraparam.ini


    Checking Installer requirements...

    Checking the operating system version: must be 5.0, 5.1 or 5.2. 6.1 membership
    Failure of < < < <

    Out of Oracle Universal Installer, log for this session can be found in C:\Program Files\Oracle\Inventory\logs\installActions2012-08-13_03-14-21PM.log

    Please press ENTER to exit...

    Please give me a solution for this-

    You can do more complicated it must be.

    In forms and reports Oracle Home, you will have a tnsnames.ora (ORACLE_HOME\NETWORK\ADMIN). If it's the file you changed, I would recommend cancelling all changes. Then simply copy and paste the entry from the db entries. So in you case put this in the file tnsnames.ora forms/States:

    ORCL1 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = USER-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl1)
    )
    )
    

    It may be necessary to change the 'USER-PC' above to the IP address or the loopback address (127.0.0.1).

    In the forms/States sqlnet.ora file make this change:

    From:

    NAMES. DIRECTORY_PATH = (LDAP, TNSNAMES, EZCONNECT, ONAMES, HOSTNAME)

    REPLACE:
    NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT, ONAMES, HOSTNAME, LDAP)

    The same concept is true for version 11 forms/States

    .

    Published by: Michael Ferrante (Oracle) on August 14, 2012 08:47

  • Lightroom 4 will not intall on windows XP!    What is going on?  CS6 is compatible with XP!

    Lightroom 4 will not intall on windows XP!What is going on?  CS6 is compatible with XP!

    What is going on?

    Lightroom will not work on Windows XP. By its design. Its clearly defined in the product specification that LR4 requires Windows Vista, Windows 7 or Windows 8.

  • is - a mc at the beginning of 2008 pro compatible with sierra?

    is - a mc at the beginning of 2008 pro compatible with sierra?

    After no.

    https://www.Apple.com/MacOS/how-to-upgrade/

    "Mac Pro (mid-2010 or more recent).

  • What is the best HDMI switch for use with Apple tv 4

    What is the best HDMI switch for use with Apple tv 4. I heard some do not work and the automatic switch has problems because Apple tv is still using power?

    I installed on a cutting and not because the automatic switch works because it isn't always. It came with a remote control that is almost as good, so don't mind the fact that automatic switching does not work well. The reason why I chose cutting is because it was the first device that gave me the good picture and sound quality with my AppleTV, the Xbox 360 and the PS4. (Don't ask!)

  • OfficeJet Pro 8600 Plus: is the Officejet Pro 8600 wireless compatible with the new standard AC dual routers.

    ISP is the Modem upgrade to DOCSIS 3.0 model. My current router, Linksis E 3200 is not fully compatible with the new modem, I have to upgrade to a model of AC Smart WiFi dual band.

    The wireless in this 8600 printer is compatible with the standard AC. If this is not the case, can it be upgraded via download to make the wireless compatible. Top of my head I have think.

    The wireless connection in the Officejet Pro 8600 is compatible with 802.11n connection on the 2.4 Ghz band.  Check your new router (or candidates for a new router), most routers AC will be also in charge of N connections.

Maybe you are looking for