What is the correct procedure to abandon diskgroup asm is rac?

Similar Questions

• What is the correct procedure to take a host of a hav?

  Sometimes need to take a host far a hav, what is the correct procedure for it?

  Thank you!

  George

  Disconnect the host in your cluster, and then remove host.  Or evacuate all customers outside the host, put in maintenance mode, and then remove the cluster

• What is the correct procedure of DMBS_XPLAN for the query execution plan

  Hello.

  We are on Oracle 11.2.0.3 on Linux. I am dev. DBA and we have about 80 developers Java development team. They want to question the execution plan of queries to resolve the sqls. Generally, they use the GUI tools like the toad to see execution plan. I always use the procedure for the following query execution plan:

  Select * from
  Table (dbms_xplan.display_cursor (null, null, 'allstats + cost'));

  I should suggest that they use this too rather than rely on tools like the toad - because they can show estimated plan and not the actual plan. And to provide a sql, it is best to use the real plan to work with. Do not take account of 'allstats + cost' part in the command above, but my point is: should I ask them of still rely on sqlplus and not the GUI tools and use the command display_cursor package DBMS_XPLAN?

  I will be grateful for suggestions.

  OrauserN

  You must use the DBMS_XPLAN package and functionality.

  The tool used to run the package doesn't matter. A raw request to DISPLAY_CURSOR will run the same server code in any tool including Toad.

  If you rely on other GUI features (for example a "explain plan" button or similar) then you know what this feature of actuall application running under-the-covers.

  My suggestion would be to assess and consider using Oracle free sql developer version 4 because it is not only FREE but also uses the DBMS_XPLAN correctly.

  http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/downloads/index.html?ssSourceSiteId=ocomen

• What is the correct procedure to upgrade Windows Vista 32 BIT to Windows 7 home one '?

  I'm running Windows Vista Home premium 32-BIT.

  I bought the upgrade disc to install Windows 7 Edition home premium.

  Where can I find a procedure step by step to install the upgrade?

  Hello

  This is a very good guide for what you want to do:

  Make sure you go from Vista 32 bit to Windows 7 32 bit to be able to do an upgrade.

  «How To Upgrade from Vista to Windows 7 Edition Home Premium»

  http://www.howtogeek.com/HOWTO/6892/how-to-perform-an-upgrade-from-Vista-to-Windows-7/

  Make sure that you first run the Windows 7 Upgrade Advisor:

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

  Edit:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

• What is the correct procedure to update Lightroom 5.7 to 6 Lightroom? My Cloud Creative application always reports Lightoom as being "up to date".

  If I choose "Check for updates" in the Help menu in Lightroom 5.7 I get the message that an upgrade is available. If I click on the button 'Download' from there I get sent to a web page with this message... «To upgrade to the latest version of Lightroom for use with your creative cloud membership, exit Lightroom, launch the creative cloud application and click on the 'Install' button next to Lightroom 5 "well there is no button 'Install' next to Lightroom 5 because creative cloud app reports that Lightroom is ' day'"»

  You must sign out of creative cloud in creative application cloud and then reconnect.

• Is this the correct procedure to several Boolean button VI?

  Hello everyone. I did this VI to use several Boolean buttons for my scale (an "Open/Close" button and a "reset" button). I want to make all my camera as boolean commands (ON / OFF) switches or buttons. IM asking this procedure using a while loop. What is the correct procedure. My VI is downloaded.

  In my previous post, a user has helped me and said, can I use a machine to States producers/consumers in this situation, but this program seems a bit Advanced and difficult for me, because I'm inexperienced with Labview.

  Thanks in advance

  Orlando

  Ah, I pointed out the bad control.  I place the event to watch the channel instead of the button.  It's one of the dangers of having several controls/indicators with the same label.  The fixed VI is attached.

  In addition, you need not use the button run continuously.  Simply run the VI normally and use the stop button to stop the VI.

• I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure?

  * Original title: upgrade

  I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure? I see that Windows 7 or 8, a free update to Windows 10 is offered. Should I buy 7 or 8 then you spend 10 or just buy 10?

  Thank you

  Jim

  Hello

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no free upgrade Vista to 7, 8.1, or 10.

  Follow these steps before you buy Windows 7.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buy you and upgrade (new installation) of Windows 8.1.

  Microsoft sells more than 8/8.1.

  Try Amazon.com, etc.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• What is the correct recovery process once upgraded to Windows 10? (No OneKey Recovery)

  I have a cell phone Z50-70 which is preinstalled with Windows 8.1. It is an OEM version, with the product key that is stored in the Bios. This is an installation of UEFI.

  The vehicle currently has OneKey recovery installed, which, if I understand well (I've not used actually still), allows you to recover from a hard disk recovery partition. This is not a "fresh" Windows 8.1, but an image provided by Lenovo that take back you to the State the laptop was bought originally (will have all software Lenovo and preinstalled drivers).

  According to the official upgrade guide Lenovo, before performing the upgrade of Windows 10, we should uninstall basically all software from Lenovo, including OneKey recovery and it won't work in Windows 10.

  Issues related to the:

  1. What is the correct process to recover the system from Windows 10 if something goes wrong? I think that Windows 10 integrates a feature "Reboot your computer" in the settings which I suppose is what we are supposed to use. It would take me to:

  a. a completely new install Windows 10?

  b. a created image during the upgrade from 8.1 to 10, containing all my files etc. when performing the upgrade?

  c. or he would use the recovery partition from Lenovo (which would have used OneKey Recovery if it was compatible) and take me back to 8.1 for Windows?

  (d) another thing?

  2. once I did the upgrade and Windows 10 has successfully activated, I think I could create a bootable with ISO of Windows 10, inside boot media and install a completely new install of Windows 10 and activate it. Theoretically, I could make as many fresh installs from the boot media I want, as long as initially, I did the upgrade (not a clean install), and the hardware of the laptop does not change. Is this correct?

  2A. If, therefore, during the first boot media clean installation process, I'd be sure compeletly remove the Lenovo recovery partition entirely and go from there, rely on 'Reset your PC' feature of Windows 10? Could I could use even just reinstall Windows boot again media 10 as a way to recover? If I understand correctly, it is not absurd to keep recovery partition it if it can not be used within Windows 10.

  I think I had a desktop PC ordinary with a retail version of Windows, then everything above would be fine. The complications added here are that 1. I have no product key Windows 8.1 (alll is managed by the BIOS) and 2. I have no recovery disk. I want to make sure that I understand everything completely before moving, and potentially do a clean installation using bootable media, so that I don't end up ruin something and end up with either a laptop I can not recover, a Windows installation that is not enabled.

  Thank you.

  Update for anyone of another reading:

  I just uninstall OneKey recovery on my installation of Windows 8.1 for the upgrade. While Windows is concerned, OneKey Recovery has been completely removed.

  The good news is that I then shut down the laptop, you press the novo button, selected "System Recovery" and I was always greeted with OneKey recovery program where I could choose to restore from original image, or a custom image. So I guess that once I have upgraded to Windows 10, I'll always have the option to restore to the factory Windows 8.1 if I ever need/want to.

  The confusion seems to be that OneKey recovery software is actually two separate software:

  1 OneKey Recovery #1 is installed in the hidden recovery partition which is responsible to perform a system restore from the image of your choice - either the image of plant or a custom image created by #2 OneKey recovery software. OneKey Recovery Software #1 is still accessible via the Novo button.

  2 OneKey Recovery #2 is installed on the Windows 8.1 installation, which is responsible for the creation of custom system images. You can also choose to restore the system from here, but AFAIK, it just restarts the computer and OneKey #1 software, which allows you to recover expenses. OneKey Recovery #2 is the software Lenovo told us to uninstall it before Windows 10. However, uninstalling OneKey Recovery #2 let software OneKey Recovery tact #1.

  As far as I know, this means that the uninstall OneKey Recovery #2 mean that we lose the ability to create custom system images, but we reserve the option to restore from a system image.

  Can anyone confirm that I understood, and that what I said above is indeed the case?

  I'm still a little uncertain about what Windows built tens in the willingness to ' PC ' do well - that it will use the Lenovo recovery partition or run a 10 Windows Installer Clean up.

• What are the correct settings in outlook express to pop and smtp in att.yahoo?

  What are the correct settings in outlook express to pop and smtp in att.yahoo?

  If it's a US or CA, Yahoo account, and that you are not subscribed to Yahoo Mail Plus, then you cannot access the account in Outlook Express.

  POP Yahoo! Mail more for Outlook Express configuration
  http://Overview.mail.Yahoo.com/enhancements/mailplus

• margins for the printer so the words are not cut on the right side. What are the correct numbers for size printing letter?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  go to the icon for your printer, go to the page set up, size, A4 sheet? 19.05 mm pitch all sides, mine is set up for this and it seems ok. or what you like

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• What is the correct URL for the commercial intent tool?

  I'm in the middle to make a transfer online. I need to know the tool the URL of Microsoft online commercial intention.

  I like: adlab.microsoft.com/Online-Commercial-Intention/default.aspx

  I tried Microsoft and a google search...

  This tool still exist? And if so, where? What is the correct URL?

  Thanks for your help!

  This is the site for

  http://ADLAB.Microsoft.com/audience-intelligence.aspx

  But when I click on the online commercial intent tool, the page is not found.
  http://ADLAB.Microsoft.com/online-commercial-intention/

  I would like to use the contact information on this page to see if the tool will be available:
  http://ADLAB.Microsoft.com/contact-us.aspx

  Contact information
  • Microsoft Bing Ads Labs
  • 1 Microsoft way, Redmond, WA, 98052-6399
  • Phone: 425.882.8080
  • Fax: 425.936.7329
  • E-mail: * e-mail address is removed from the privacy *.
  • Website: http://adlab.microsoft.com

    Sincerely,

    Marilyn

• What is the normal procedure for windows live support call and offer to fix errors on my computer?

  What is the normal procedure for "windows live support" to call and offer to fix errors on my computer?

  What is the normal procedure for "windows live support" to call and offer to fix errors on my computer?

  N° !!!
  Scam!
  Ignore and hang up. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• What is the correct order of network provider

  original title: network provider order

  What is the correct order for network providers.

  my choices are:

  a. provide Dell Wireless WLAN Card Logon

  Server Desktop Session host remote M/Soft b.

   c. Web Client Network and

  d. M/Soft Windows network...

  Hello

  The order of network providers can be changed according to the requirement. I suggest you to see the following link on the change of the network adapters.

  Modify the protocol bindings and the network provider order
  http://TechNet.Microsoft.com/en-us/library/cc732472 (v = ws.10) .aspx

• What is the correct syntax to reference a page point (P23_ID, for example) in a process of PL/SQL page after submit?

  What is the correct syntax to reference a page point (P23_ID, for example) in a process of PL/SQL page after submit?

  TexasApexDeveloper wrote:

  Variable binding is preferred: P23_ID you can also use & P23_ID. (variable substitution notation).

  Bind variable and static text substitution references are not interchangeable. For example, static text substitution references cannot be used in allocation targets:

  :P23_ID  := 'foo';  -- valid
  &P23_ID. := 'bar'; -- syntax error (or something weird or sinister due to SQL injection)
  

  Substituting static text references should be avoided in SQL and PL/SQL code because of the risk of behavior topic SQL injection and / odd error because of values containing quotes, etc.