What is the difference between the following two interfaces?

Similar Questions

• What is the difference between the following two views?

  What is the difference between the following two views?
  DBA_OUTSTANDING_ALERTS
  DBA_ALERT_HISTORY

  junez wrote:
  What is the difference between the following two views?
  DBA_OUTSTANDING_ALERTS

  This would have information on these alerts statefull who are still alive and would be cleared if the corresponding action for them is taken.

  DBA_ALERT_HISTORY

  It contains the history of all the alerts that have been generated so far in the database.

  For the rest, like the columns and all, you already have the answers.

  HTH
  Aman...

• I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages

  I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages:

  "Do not create C:\Users\User\AppData\Local\Temp; c:\arc\01Script\FormatUFD.SP' and the messsage "Fail to create.

  How to port HP_recovery in car to my flash drive?

  Windows 7 x 64, HP G62-144DX

  Hello:

  I can't help you with this specific issue, but if you can get it is resolved and you can read the product key 25 character Microsoft Windows on the bottom of your PC, do your own installation of W7 media to reinstall W7.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• What do the following entries in the following configuration file?

  What do the following entries in the following configuration file?
  Thank you
  < include > coherence-pof - config.xml < / include >
  < allow-interfaces > true < / allow interfaces >
  true < subclasses allow > < / subclasses allow >
  

  <?xml version="1.0"?>
  <!DOCTYPE pof-config SYSTEM "pof-config.dtd">
  <pof-config>
  <user-type-list>
  <!-- coherence POF user types -->
  <include>coherence-pof-config.xml</include>
  <!-- com.tangosol.examples package -->
  ...
  <allow-interfaces>true</allow-interfaces>
  <allow-subclasses>true</allow-subclasses>
  </pof-config>

  -L' allow-interfaces to indicate if the class name of the type of user can specify types of Java interface in addition to the Java classes. Valid values are "true" or "false". Default value is false.

  -L' allow-sub-classes element indicates if the user-name of the class type can specify a type of Java class which is abstract, and whether subclasses of any type of user specified name of the class will be allowed during execution and automatically map to the super class specified for a serializer. Valid values are "true" or "false". Default value is false.

  -L' user-type-list element contains zero or more elements of type of consumer. Each type of user POF that is used must be included in the list-type-user. The item of list-type - the user can also contain zero or more include items. Each includes element is used to add items of type user defined in another pof-config file.

  The include element specifies the location of a pof-config file to load items of type user of. The value is a string of locator (URL or a valid path) that identifies the location of the target pof-config file.

  http://wiki.tangosol.com/display/COH35UG/user-type-list

  http://wiki.tangosol.com/display/COH35UG/POF-config

  Thank you

  Everett Williams
  Team coherence

• What are the following wait events? Someone can it translate into the details?

  What are the following wait events? Someone can it translate into the details?
  PX Deq: Example table Q
  PX Deq Credit: send blkd
  PX Deq: Join AC
  PX Deq: Signal ACK
  PX Deq: Fragment of Msg
  direct path read
  PX qref latch
  

  SQL> select event,total_waits,time_waited,wait_class from v$system_event order by total_waits;
  EVENT                          TOTAL_WAITS TIME_WAITED WAIT_CLASS
  ------------------------------ ----------- ----------- --------------------
  db file scattered read             9333287     2471813 User I/O
  *PX Deq: Table Q Sample            11401065    43684227 Idle*
  *PX Deq Credit: send blkd          13798394    25448649 Other*
  SQL*Net message from client       20767011  1179217392 Idle
  SQL*Net message to client         20767019        2618 Network
  *PX Deq: Join ACK                  23735308     1022426 Idle*
  *PX Deq: Parse Reply               24882798     1278726 Idle*
  rdbms ipc message                 25223968  2147012652 Idle
  *PX Deq: Signal ACK                26615286    27873560 Other*
  cursor: mutex X                   26745289       52071 Concurrency
  *PX Deq: Msg Fragment              43670924    78219774 Idle*
  
  EVENT                          TOTAL_WAITS TIME_WAITED WAIT_CLASS
  ------------------------------ ----------- ----------- --------------------
  PX Idle Wait                      68927042  4364594403 Idle
  PX Deq: Execute Reply             88498025     4326377 Idle
  PX Deq: Execution Msg            823922687   792964190 Idle
  *direct path read                1274423531     7242769 User I/O*
  *PX qref latch                   2.3745E+11    49638018 Other*
  
  122 rows selected.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/waitevents.htm#i968375

• What is a difference between the Satellite & Satego?

  Hello

  Please, can someone tell me the difference between satego and satellite?

  The difference between the Satellite and the Satego is the same as the difference between the Satellite and the satellite ;)

  The difference is a portable computer name, but of course not all series are equipped with the same parts and peripherals!
  So it's not easy to say what are the exact differences between the single computer laptop series. Simply check the descriptions

• What is a difference between 'Logical processors' and 'logical processors for each host?

  Hi all!

  In the official document VMware "vsphere-51-configuration-maxima" or "vsphere-55-configuration - maximums.pdf" in the section "ESXi host maximum rates------Maximums calculation" exists in the elements:

  "Maximum CPU------logical CPU for each host ' (vSphere 5.1: 160;)   vSphere 5.5: 320)

  and

  "Machine virtual maximums------virtual CPU by host ' (vSphere 5.1: 2048;)    vSphere 5.5: 4096)

  Question: what is the difference between the two?

  And a more complex thing to maximum rates:

  Virtual machines per host: 512

  Number of hosts per cluster: 32

  Therefore, the cluster may be Virtual Machines (maximum): 521 * 32 = 16384

  But in the document, we have only 4000 VMs in maximum.

  Why?

  Thank you

  Ramirez,

  I understand your question as difference between 1. logic virtual CPU vs / by the hosts and 2. cluster/host Max County VM.

  Consider the case below;

  2 servers ESXi - 20 mV

  ESXi taken 1-4, 2 cores / socket

  ESXi 2-8 Sockets, 2 cores / socket

  Now here number of CPU logic-(4 x 2) + (8 x 2) = 24

  20 virtual machines - 2 jacks, 2 core / socket

  Virtual CPU count - 20 x (2 * 2) = 80

  Hope your first confusion is clear now.

  And a more complex thing to maximum rates:

  Virtual machines per host: 512

  Number of hosts per cluster: 32

  Therefore, the cluster may be Virtual Machines (maximum): 521 * 32 = 16384

  But in the document, we have only 4000 VMs in maximum.

  Why?

  This means that even if you have 32 Guest and each host can accommodate 512 VMs each the maximum number of virtual machines per cluster may not exceed 4000. And it does not mean that you can have a maximum of VMS (512 * 32).

  ~ dGeorgey

• Satellite A200 - 17 PSAE0E: what is a difference between 1.5 & 1.8 BIOS

  I just bought satellite A200 - 17 (PSAE0E) and BIOS in my machine is v1.50.
  On this page, I noticed later BIOS is 1.80 so I wonder what changes are there between these two BIOS?
  At the moment I am on Linux (ubuntu 7.10) as my OS and having two or three ACPI related problems so I can use the information on these changes.

  Hello

  Sorry to say, but as far as I know BIOS changes are not published on the page of Toshiba.
  I find some details about the driver Toshiba we page but nothing on the European driver Toshiba page.

  I guess that it s a part of politics.

• Difference between 2 different scsi interface

  Hello

  I have a small question about the difference between Virtual Device Node SCSI (0:0) and SCSI (1:0).  They have the same terms of performance? What are the disadvantages and advantages.

  Thanks in advance.

  James.

  I looked at the virtual device nodes only adding RDM, I prefer adding them to a knot of virtual device separated for better performance.

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  F10

  http://KB.VMware.com/

• What triggers the follow-up of health?

  I'm having a hard time to find out what is triggering the alert.

  

  First I thought that it was because one of my esxi has not shown his material status but I have corrected this error and still I get the alert.

  does anyone have an idea what might trigger the alert

  I found this in the log:

  Event ID 2527 - Configuration of the Directory Server Service account is not in a position

  Pourriez - me what the alert?

  I got the error because I installed a new vcenter but had no installed converter it gave an error

  When I installed the component issue has been resolved

  Thanks for you comments

• What does the error ' two Claim property objects of...» » ?

  

  Hello

  Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is more than 30 MB, you can use something like Adobe SendNow or SendThisFile. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

• Difference between NULL and two single quotes

  Hello
  Advice me please on what follows.
  
  First we will do an update.
  
  Update table_name set column_name = ";
  
  After update of why following queries return different results?
  
  1. select count (*) from table_name where column_name is null;
  2. select count (*) in the table table_name where column_name = ";
  
  I understand the request update set null column values and the first select is the right way to get the number of null values. But I want to know what the second problem with the select statement.
  Thank you.
  
  Published by: Lacotte Sajeeva January 15, 2013 21:29

  You should not ' equal to ' a NULL string. A NULL string is an unknown value in Oracle. You can't IS NULL or IS NOT NULL.
  You should not perform
  = NULL
  =''
  ! = NULL
  !=''

  Hemant K Collette

  Published by: Hemant K Collette on 16 January 2013 13:35
  Changed to "do not do" for "should not do."

• Any difference between the two queries

  Hello

  Could someone please help me to see if the following two queries return different results?

  Thank you

  Query A

  SELECT A.BATCH_NO,

  A.BU_CODE,

  SUM (A.AMOUNT) AMOUNT

  FROM TABLE_A HAS

  WHERE A.BU_CODE = 20

  AND G_DATE BETWEEN TO_DATE (JANUARY 31, 2013 ',' MON-DD-YYYY "")

  AND TO_DATE (MARCH 31, 2013 ',' MON-DD-YYYY "")

  --

  AND A.BATCH_NO IN (SELECT BATCH_NO

  TABLE_A B1

  WHERE B1. BATCH_NO = A.BATCH_NO

  AND B1. BU_CODE = A.BU_CODE

  AND B1. ' CODE_P = ' 06-01-01-000.

  AND B1. FROM_FLAG = 'FROM '.

  )

  AND A.BATCH_NO IN (SELECT BATCH_NO

  FROM TABLE_A B

  WHERE B.BATCH_NO = A.BATCH_NO

  AND B.BU_CODE = A.BU_CODE

  AND B1.ORG = '10'

  )

  A.BATCH_NO GROUP,

  A.BU_CODE

  ;

  Query B

  SELECT A.BATCH_NO,

  A.BU_CODE,

  SUM (A.AMOUNT) AMOUNT

  FROM TABLE_A HAS

  WHERE A.BU_CODE = 20

  AND G_DATE BETWEEN TO_DATE (JANUARY 31, 2013 ',' MON-DD-YYYY "")

  AND TO_DATE (MARCH 31, 2013 ',' MON-DD-YYYY "")

  --

  AND A.BATCH_NO IN (SELECT BATCH_NO

  TABLE_A B1

  WHERE B1. BATCH_NO = A.BATCH_NO

  AND B1. BU_CODE = A.BU_CODE

  AND B1. ' CODE_P = ' 06-01-01-000.

  AND B1. FROM_FLAG = 'FROM '.

  AND B1.ORG = '10'

  )

  A.BATCH_NO GROUP,

  A.BU_CODE

  ;

  Hello

  These 2 requests are not the same.  Depending on your data, query A, can select more lines as searching for B.

  I do not have access to your table, so I'll give an example of using the table scott.emp.

  The following 2 queries look like your 2 questions:

  SELECT deptno - query A
  work
  sal
  FROM scott.emp m
  WHERE deptno IN ((in English only)
  SELECT sj.deptno
  FROM scott.emp sj
  WHERE sj.deptno = m.deptno
  AND sj.job = 'CLERK '.
  )
  AND (IN) deptno
  SELECT ss.deptno
  FROM scott.emp ss
  WHERE ss.deptno = m.deptno
  AND ss.sal > 1200
  )
  ;

  SELECT deptno - query B
  work
  sal
  FROM scott.emp m
  WHERE deptno IN ((in English only)
  SELECT s.deptno
  FROM scott.emp s
  WHERE s.deptno = m.deptno
  AND s.job = 'CLERK '.
  AND s.sal > 1200
  )
  ;

  The results of A query are all 14 rows in the table, but query B produces only 3 lines of deptno = 10.

  Query A looking for departments who have committed and the departments that have sal > 1200.  If a line in the Department has job = 'CLERK' (regardless of the sal), and another line was sal > 1200 (regardless of the work), while the Department meets both criteria.

  Query B is looking for federal departments who have committed that sal is over 1200.  Two criteria must be met on the same line.

• Difference between the foreign key index and secondary index

  Hello
  
  Suppose we have two primary databases,
  
  Employee (id, company_id)
  
  Company (id, name)
  
  (where: the employee of the company is one to many, and I use the collections API)
  
  If we want to perform a join between the employee and the company based on the ID of the company. I want to know the difference between the following two options:
  
  1 - construction of a secondary index on the Employee (company_id). call this index index1. Then, we use the following code:
  
  For each company c
  index1.get (c.ID)
  
  2 - construction of a foreign key on Employee (company_id) index where the database of foreign key was undertaken. call this index index2. Then, we use the following code:
  
  For each company c
  index2.get (c.ID)
  
  I have two questions:
  
  1 - What is the difference between these two options in terms of performance?
  
  2. I know that one of the benefits of the foreign key are the application of integrity constraints (CASCADE, CANCEL, etc. to DELETE). That declare a foreign key to give me any advantage when I want to do a join? (for example a quick method, or a single statement to a join)
  
  Thank you
  Wait.

  It doesn't matter what the example, the only advantage of a foreign key index (above, the benefits of a secondary index) is that it imposes of foreign key constraints. There is no other advantage to a foreign key index.

  -mark

• Difference between variable interface user layout and presentation of the add() method UI?

  Hello

  What is the difference between a variable user interface layout and presentation of the add() method UI?

  Presentation of the variable user interface is something like this:

  var windowResource = "palette {  \
      orientation: 'column', \
      alignChildren: ['fill', 'top'],  \
      preferredSize:[300, 130], \
      text: 'ScriptUI Window - palette',  \
      margins:15, \
      \
      bottomGroup: Group{ \
          cd: Checkbox { text:'Checkbox value', value: true }, \
          cancelButton: Button { text: 'Cancel', properties:{name:'cancel'}, size: [120,24], alignment:['right', 'center'] }, \
          applyButton: Button { text: 'Apply', properties:{name:'ok'}, size: [120,24], alignment:['right', 'center'] }, \
      }\
  }";
  
  var win = new Window(windowResource);
  
  win.show();
  

  presentation of the UI Add() method is something like this:

  var w = new Window('dialog', 'Random Number Generator');
  var btn_group = w.add('group'),
      btn_ok = btn_group.add('button', undefined, 'Ok');
  
  w.show();
  

  Thank you!

  Since the Guide Javascript Tools on the specifications of the resource (you're high example on the page):

  You can create one or more UI both elements by using a resource specification. This specially formatted string provides a simple and compact of the creation of an element, including any container element and its constituent elements. The resource-specification string is passed as a parameter to the constructor function Window() or add().

  The general structure of a resource specification is a specification of item type (for example, dialog box).

  followed by a pair of curly braces surrounding one or more property definitions.

  myResource var = 'dialogue {control_specs} ";

  var myDialog is new window (myResource);.

  The controls are defined as properties in windows and other containers. For each control, give the name of the control class, followed by the properties of the control between braces.

  I had trouble getting the resource specifications to work - probably just didn't make the time to understand. A few differences is that some of the properties that they put in the resource specifications in brackets after the element will not work in the other method, if you do it this way. You normally have to make a second line and add this property. I'm not sure of the first method, but the second is the function object, and you can use the structure of the object (object, nextProperty, etc.) or set a variable to represent the object. In most of the scripts that I write, I use variables and give them a name such as:

  myCheckBox var = dlg.inSomeGroup.add ('checkbox', undefined, "text box '");

  myCheckBox.name = "maCaseACocher";

  By doing this, I can create a recursive function that goes through the entire user interface and retrieves the values of the elements and writes this information to an xml file. Including the names allows the script to identify which variable to control / it is in the xml file, so that it can be reassigned to proper control. I have not tried this with the method of specifications for resources, so I don't know if it will work with it.