Coordinates of the cursor & Rectangle coordinates does not not to

Similar Questions

• I am suddenly unable to rename folders. Insert the cursor, but it does not respond when I type characters, or even when I hit him back out. Know a simple fix?

  After cropping of a photo with Photoshop I discovered that I was unable to rename.  I soon found out that the same thing is true when I tried to rename main folders in My Documents.  I am able to insert the cursor, but it does not respond when I type characters, or even when I hit him back out.  Know a simple fix?

  Name change is a directory operation.  It would seem that you have read and write access to your directories, but you do not change access.  This highlights a problem with file permissions.  How is 'Simple' the fix depends on which version of Windows you have to a certain extent.

  Windows XP Pro (with "Simple file sharing" turned off) using the security"" tab. When you right-click on a file or a folder and select 'Properties', then click on the 'Security' tab to view and change the permissions.

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Windows XP Home Edition is a bit more complicated.  You can start safe mode and log in as administrator for the 'Security' tab as above, or you can open a command prompt window (start-> Run-> "cmd") and allows you to display the 'cacls' command or change the permissions of files and folders.  You should check that your username has permission to ull 'F' for your records.  Not pretty, but it works.

  CACLS: <> http://technet.microsoft.com/en-us/library/bb490872.aspx >

  HTH,
  JW

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• E-mail frozen - cursor moves but does not respond when you click

  cursor moves but does not respond when you click

  Hello
   
  1. what email program are you using? Is - this Windows Mail or Outlook?
  2. is the problem with emails in Gmail or Hotmail or Yahoo on Internet Explorer?
   
  This can happen if the e-mail scanner is running on the system. The analysis of electronic mail is a built-in feature of many security software. We recommend that you disable the e-mail analysis and check the result.
   
  Please provide us with more details on the issue, so that we can better help you.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Cursor/Caret appearing does not in EditField?

  I have an EditField which cursor/insertion sign does not appear.  What Miss me?  Here is my code (and I use 4.5.0 and SIM 8300):

  myEditField = new EditField( "", "", 7, Field.EDITABLE | Field.FIELD_LEFT ){
  
  // inner class method to set field size (setExtent)
  public void layout( int width, int height ) {
    int maxFontWidth = getFont().getAdvance( "W" );
    int fieldSize = myEditField.getMaxSize();
    int newWidth = maxFontWidth * fieldSize;
    setExtent( newWidth, getPreferredHeight() );
  }
  
  // inner class methods to handle changes onFocus/onUnfocus
  public void onFocus( int direction ) {
    super.onFocus( direction );
    invalidate();
  }
  
  public void onUnfocus() {
    super.onUnfocus();
    invalidate();
  }
  
  // inner class method to set text/background colors
  public void paint( Graphics g ) {
    if (myEditField.isFocus()) {
      g.setBackgroundColor( Color.LIGHTGREY );
    } else {
      g.setBackgroundColor( Color.WHITE );
    }
    g.fillRect( 0, 0, getWidth(), getHeight() );
    g.setColor( Color.NAVY );
    g.clear();
    g.drawText( myEditField.getText(), 0, 0 );
    super.paint( g );
  }
  
  }; // end inner class overrides
  

  Try this.  Sorry do not know what I changed to your code at random is went through she change things that did not look right.  However, the 'trick' is the drawFocus.

  In any case, I need to real work, please review, compare, test etc and see how you go.

  myEditField = new EditField( "Label", "Text", 7, Field.EDITABLE | Field.FIELD_LEFT ){
  
    boolean _drawFocus = false;
  
  // inner class method to set field size (setExtent)
  public void layout( int width, int height ) {
    int maxFontWidth = getFont().getAdvance( "W" );
    int fieldSize = this.getMaxSize() + this.getLabel().length();
    int newWidth = maxFontWidth * fieldSize;
    super.layout( newWidth, height );
  }
  
  // inner class methods to handle changes onFocus/onUnfocus
  protected void onFocus( int direction ) {
    super.onFocus( direction );
    invalidate();
  }
  
  protected void onUnfocus() {
    super.onUnfocus();
    invalidate();
  }
  
  protected void drawFocus(Graphics graphics,
                           boolean on) {
    _drawFocus = on;
    super.drawFocus(graphics, on);
    _drawFocus = false;
  }
  
  // inner class method to set text/background colors
  public void paint( Graphics g ) {
    if ( _drawFocus ) {
      super.paint(g);
      return;
    }
    int currCol = g.getColor();
    if (this.isFocus()) {
      g.setBackgroundColor( Color.LIGHTGREY );
    } else {
      g.setBackgroundColor( Color.WHITE );
    }
    g.fillRect( 0, 0, getWidth(), getHeight() );
    g.clear();
    g.setColor( Color.NAVY );
    super.paint( g );
    g.setColor(currCol);
  }
  
  }; // end inner class overrides
  

• Wacom Cintiq to the brush size adjustments does not

  Hello!

  I just bought a Wacom Cintiq 13HD touch and I can't brush shortcuts adaptation to work. After some googling, I understand the problem is that I don't have an English keyboard and shortcut keys the Tablet uses are the ' [' and ']' key that does not exist on my Swedish keyboard. These characters you get by 'Alt' + '8' / '9'. I tried to reconfigure the shortcuts of these combinations in the Wacom configuration application, but that didn't work either. In fact these combinations does not work on my keyboard either. I can't find any solution to this other than to change English keyboard, I don't want to do. And as the screen is small, it is essential to be able to easily change the size of the brush. Using the cursor is not very easy. Any ideas?

  Hi UglyBob,

  What version of Lightroom do you use?

  Please follow https://www.slrlounge.com/set-up-your-wacom-intuos-pen-tablet-for-lightroom/ to correctly configure your tablet with Lightroom.

  Kind regards

  Assani

• Scroll effects on the CC host file does not

  I'm trying to post embed a file CC animate in my Web of Muse page and use scrolling effects to advance the animation as the page scrolls down. I created the animation, published as a .oam file, it included in my Muse and added scrolling effects together to go to the section following listel. Integration worked very well and the animation is here, but there are two problems:

  (1) the animation simply autoplays as soon as the page loads and does not advance along with scrolling motion

  (2) when the mouse cursor is positioned on the integrated animation, you cannot scroll the Web page at all

  Scroll effects are defined properly, with the animation set to advance a second each 200px. I've seen tutorials on how to animate this with edge, forcing unchecking them a checkbox "autoplay" on the stage, but I can't find any such box in CC to animate. Any suggestions?

  From what I hear, the scrolling effects workflow is not supported in workflow Animate/Muse currently, as he has already worked with OAM files created in Edge animate. The team seeks to give priority to the request for a future update.

• I downloaded the latest version, but the form page tells me to download the latest version and does not display the form

  I downloaded the latest version, but the form page tells me to download the latest version and does not display the form!

  Ok. Chrome has stopped supporting the player plug-in (for now). You'll want to download the forms by placing the cursor on the link, right click and check-in at your computer. Alternatively, you can try another browser such as Internet Explorer.

• Cursor image muse does not work in Chrome or mobile

  Cursor image muse does not work in Chrome or mobile, but no problem for Firefox, IE and Safari

  You really want to know? Haha. Customer wanted to slide show 'stop' for a while and then start again. The easiest way for me to do is to add some regular black images at the end of the slide show. You will see that the first image shows also twice - he wanted a delay for the slide show to start at the same time as the song.

  But I solved the problem in the meantime anyway - photos were not optimized for web use. It worked perfectly for two years, so I don't understand why the sudden error. Anyway, I opened the photos in Photoshop and was saving for web use one by one. Not sure there is a faster way to do it, but it worked

  Thanks for the help anyway!

• Using the stored procedure: Source does not have a target executable

  I'm a guy from MS - SQL, so I'm fairly familiar with T - SQL syntax, but feels a heck of a time trying to take the code I wrote for SQL and turn this works with Oracle.
  
  in any case, I'm using Oracle SQL Developer, and I have a stored procedure that calls the Alter Table statement and adds a column. Just trying to get this one to work before moving on to the other that I have. I get the message that source does not have a target executable when I try to run this command.
  
  create or replace PROCEDURE rta_conv_addcolumn (rtatablename1 in varchar (20),)
  rtatablename2 in varchar (20),
  rtacolumnname in varchar (256),
  rtacolumninfo in varchar (256))
  AS
  DECLARE rtasql VARCHAR (4000);
  BEGIN
  IF EXISTS (SELECT * from user_tables WHERE table_name = rtatablename1)
  AND NOT EXISTS (SELECT * from user_tab_columns WHERE column_name = rtacolumnname)
  AND table_name = rtatablename1)
  AND NOT EXISTS (SELECT * from user_tab_columns WHERE column_name = rtacolumnname)
  AND table_name = rtatablename2)
  Then rtasql: = ' ALTER TABLE ["+ rtatablename2 +"] ADD "+ rtacolumnname +" "+ rtacolumninfo;
  Run (rtasql);
  END rta_conv_addcolumn;
  
  If I try to compile I get the following messages, which make no sense, since the syntax I use to declare the input variables seems to be good.
  
  Error (1.54): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (2.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (3.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (4.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (6.1): PLS-00103: encountered the symbol "DECLARE" when expecting one of the following: begin function package pragma procedure < an ID > subtype type use < a between double quote delimited identifiers of > form current cursor external language the symbol 'start' is substituted for 'SAID' continue.
  Error (15.5): PLS-00103: encountered the symbol "RTA_CONV_ADDCOLUMN" when expects it one of the following values: If

  Adds the column to the table specified in rtatablename1, if there is neither rtatablename1 nor rtatablename2.

  NOT TESTED

  create or replace PROCEDURE rta_conv_addcolumn(rtatablename1 in varchar,
  rtatablename2 in varchar,
  rtacolumnname in varchar,
  rtacolumninfo in varchar)
  AS
  rtasql VARCHAR(4000);
  count1 number;
  count2 number;
  count3 number;
  BEGIN
    SELECT count(*) into count1 FROM user_tables WHERE table_name = rtatablename1;
    SELECT count(*) into count2 FROM user_tab_columns WHERE column_name = rtacolumnname AND table_name = rtatablename1;
    SELECT count(*) into count3 FROM user_tab_columns WHERE column_name = rtacolumnname AND table_name = rtatablename2;
    IF count1>0 AND count2 = 0 AND count3=0 Then
      rtasql:= 'ALTER TABLE '|| rtatablename1 ||'ADD ' || rtacolumnname || ' ' || rtacolumninfo;
      Execute immediate rtasql;
    END IF;
  END rta_conv_addcolumn;
  /
  

  Max

  Published by: Massimo Ruocchio, December 12, 2009 02:15
  Missing AND

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings

  Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.

  Hello JPMain,

  Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.

  The backup of your iPhone, iPad and iPod touch

  Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.

  Have a great day!

• Download Nikon D90 photos via a cable of Photos does not work. The picture freezes and does not matter. Any ideas?

  Download photos of Nikon D90 Photos OS El Capitan 10.11.16 cable does not work. The picture freezes and does not matter. Any ideas?

  Try with Capture of Image (in your applications folder)

  LN

• When I click to open thunderbird but the e-mail window does not appear until the icon shows the app closed, how to fix this?

  To start thunderbird, I click on the quick start on my toolbar icon, it highlights that if beginner, then a few seconds later, returns to the closed state. No e-mail window never appears on the screen. When I check the Task Manager, thunderbird does not appear in the list of running applications, but one or two processes show running on the Details tab (one first process by clicking on the icon, and then another if I right click and try to open one of the windows in option). I am running Windows 8.1. It worked well earlier in the day, so I have no idea what happened past. Restart the PC does not help the issue. How can I get the windows thunderbird appears on the screen again? If I can't, please send the instructions to backup all the associated email and address profile information so I did not lose anything... then uninstall and reinstall thunderbird and restore all the info related to my current profile. Thank you.

  Thanks for the reply... still not sure what happened, but I ended up uninstalling and reinstalling bird t. Everything is back to normal after that. So your solution can work, but I don't have the chance to try it. My solution, but is not ideal, was effective and the problem was solved.

• calendar for the week of jQuery does not work in the new version of firefox v42.0

  Hello
  Thanks for your reply.
  IAM develop on the issue that iam facing knowledge, events on the calendar for the week of jquery does not work in firefox version iam 42.0 faced to the problem that iam unable to change back or delete nominations that are displayed.
  For example if try clicking on one of the appointment generally a popup comes to change or to restore or remove the appointment but iam not getting that. But this feature does not work in lower versions of firefox (version 32.0 for example). Please check the jquery week calendar demo following URL looks like this:
  http://robmonie.github.IO/jQuery-week-calendar/full_demo/weekcalendar_full_demo.html

  I've just rescheduled lunch 12:00-12:15, so it seems to work on 42 Firefox on Windows.

  What is the latest version, where it has worked for you?

  Have you tested Mode Firefox safe to rule out the possibility of an extension conflict? See: Firefox in Safe Mode troubleshooting questions.

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)