What is the difference between the processor

Similar Questions

• What is a difference between 'Logical processors' and 'logical processors for each host?

  Hi all!

  In the official document VMware "vsphere-51-configuration-maxima" or "vsphere-55-configuration - maximums.pdf" in the section "ESXi host maximum rates------Maximums calculation" exists in the elements:

  "Maximum CPU------logical CPU for each host ' (vSphere 5.1: 160;)   vSphere 5.5: 320)

  and

  "Machine virtual maximums------virtual CPU by host ' (vSphere 5.1: 2048;)    vSphere 5.5: 4096)

  Question: what is the difference between the two?

  And a more complex thing to maximum rates:

  Virtual machines per host: 512

  Number of hosts per cluster: 32

  Therefore, the cluster may be Virtual Machines (maximum): 521 * 32 = 16384

  But in the document, we have only 4000 VMs in maximum.

  Why?

  Thank you

  Ramirez,

  I understand your question as difference between 1. logic virtual CPU vs / by the hosts and 2. cluster/host Max County VM.

  Consider the case below;

  2 servers ESXi - 20 mV

  ESXi taken 1-4, 2 cores / socket

  ESXi 2-8 Sockets, 2 cores / socket

  Now here number of CPU logic-(4 x 2) + (8 x 2) = 24

  20 virtual machines - 2 jacks, 2 core / socket

  Virtual CPU count - 20 x (2 * 2) = 80

  Hope your first confusion is clear now.

  And a more complex thing to maximum rates:

  Virtual machines per host: 512

  Number of hosts per cluster: 32

  Therefore, the cluster may be Virtual Machines (maximum): 521 * 32 = 16384

  But in the document, we have only 4000 VMs in maximum.

  Why?

  This means that even if you have 32 Guest and each host can accommodate 512 VMs each the maximum number of virtual machines per cluster may not exceed 4000. And it does not mean that you can have a maximum of VMS (512 * 32).

  ~ dGeorgey

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• What are the processors supported by Vostro 200?

  Is someone can you please tell me what are the processors are supported by the motherboard Vostro 200. Currently I have a processor Core 2 Duo 6320 @ 1.8Ghz and hoped to upgrade the processor E8500 3.16. The motherboard will support this processor if I buy the Intel of the market? Thank you!

  
  

• What is a difference between the Satellite & Satego?

  Hello

  Please, can someone tell me the difference between satego and satellite?

  The difference between the Satellite and the Satego is the same as the difference between the Satellite and the satellite ;)

  The difference is a portable computer name, but of course not all series are equipped with the same parts and peripherals!
  So it's not easy to say what are the exact differences between the single computer laptop series. Simply check the descriptions

• Difference between Intel processors

  Could someone tell me the difference between celeron to intel 2 ghz and processor intel celeron m 380?

  Hello

  I think that the best information you can find by the producer himself.
  INTEL PROCESSORS

  Good bye

• Satellite A200 - 17 PSAE0E: what is a difference between 1.5 & 1.8 BIOS

  I just bought satellite A200 - 17 (PSAE0E) and BIOS in my machine is v1.50.
  On this page, I noticed later BIOS is 1.80 so I wonder what changes are there between these two BIOS?
  At the moment I am on Linux (ubuntu 7.10) as my OS and having two or three ACPI related problems so I can use the information on these changes.

  Hello

  Sorry to say, but as far as I know BIOS changes are not published on the page of Toshiba.
  I find some details about the driver Toshiba we page but nothing on the European driver Toshiba page.

  I guess that it s a part of politics.

• What is the processor Xeon 4 SCv2000 hearts?

  I apologize because I had a similar question, but I posted it on NX3230 in the PowerVault section and it was a mistake. Do not NX3230 but SCv2000. What should I ask is on SCv2000 processor.

  I have download a data sheet on SCv2000 series and it says that its processor is 4-core Xeon. Now I would like to know exactly what processor Xeon 4 strands used in Dell SCv2000. Is - this processor is single or double? What is E5 or E7? Is it v2 or v3? If only one CPU, is not turbo, the single processor Xeon E5-1607 v3, or low voltage Dell SC4020, single processor Xeon E3 - 1265L v2, 2.50 GHz, 4 cores?

  Thank you.

  P.S.: Highlighted parts are my additions/editions.

  Ok. I've had several levels upward, it's the only amount of information that we publish at this time. I can not go further on this table.

• HP Pavilion DV6T-3000: what are the processor i7 can this motherboard can I go to?

  Hello

  I'd like to update my CPU, but don't know which are supported by my motherboard.

  I have a HP Pavilion DV6T-3000 series.

  Part of the motherboard: 615278-001

  Original CPU: i7-720QM

  In the dv6 manual (link below), it is mentioned that the Intel Core i7-740QM, i7-820QM and i7-840QM can used in general by computer laptop dv6, but it's not to specify which processor when with the motherboard.

  http://www.HP.com/CTG/manual/c02657339.PDF

  I would like to used the upgrade to i7-840QM, or at least i7-820QM or same i7-740QM as last resort.

  Will be my motherboard suport it?

  Thank you

  See page 22 of the manual here:

  Manual

  Unlike compatibility processor only in motherboards, it's that there are motherboards for dual core and Quad Core boards. If you have a Quad Core, you can install any other Quad Core. These mobile Intel Core i7 1 genQuads always tends to be expensive and I don't know how much delivery must be done by replacing one such Quad Core for another. The base clock speed increase would be only 1.6 to 1.86 ghz, which is not terribly important. On eBay the i7-840QM is still ongoing for over $ $100 and for that price you approach the cost of a 500 GB SSD, which would provide a lot more help to your user experience.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite M30-S309 - what is the fastest processor for upgrade?

  I'm looking to upgrade the CPU in my M30 and wonder, what is the processor the faster, in that I can put? I am very familiar with the guts of the PC and I'm comfortable replace myself, I just need to know what the fastest I can get is.

  Any help is greatly appreciated!

  Tom

  Hello

  Until you have created this topic, did you find it?
  [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]

  If you want to risk this update check the specifications of the other portable Satellite M30. If you can find one with faster CPU, maybe it will work also on your laptop.

  But don not forget that the current CPU is tested in your laptop!

  Welcome them

• RAM upgrade problem: Flash the BIOS? or upgrade the processor?

  Hi, I jumped in with both feet and now need help to get out me!

  I have a desktop PC HP Pavilion Elite HPE-470uk who becomes a bit slow (processor card here http://ark.intel.com/products/48505/Intel-Core-i3-550-Processor-4M-Cache-3_20-GHz). After you have added a bluray player that I noticed that it's getting a bit slow so thought I would add little RAM.
  

  I bought a few Hyper X8GB of HyperXbeast 1600hhz, slipped in and the PC did nothing but to turn on and off several times. I checked the two sticks and they both do it. I then (plow in front) checked what memory, the processor can handle and discovered "The Intel® Core™ i3 - 5xx / Intel® Core™ i3-21xx processors handle memory DDR3 1066/1333 MHz" by http://www.intel.com/support/processors/corei3/sb/CS-031175.htm

  After a discussion on another forum, that it has been suggested that I have updated the BIOS because it can allow the processor to manage memory 1600 mhz, but I don't know where to start on this or what version to selected download. I'd appreciate any help you can offer on this.

  The other way, that I can see is to update the processor itself. I thought of nothing too fancy just an i5 because it will allow me to run 3d blurays and should allow me to run some apps at the same time. After reading this http://m.wikihow.com/Upgrade-a-Processor it seems too complicated. Is it really just a matter of taking off the fan, declipsant the old processor, nine droping in and then put on some cooling stick stuff?

  Or should I just return the memory and get good memory?

  See you soon

  Atdot.

  Here are the specifications of original factory for your desktop HP Pavilion Elite HPE-470uk and its card mother MS-7613 (Iona-GL8E). Based on these specifications, this model can support up to 16 GB (4 GB x 4 DIMMs) as follows:

  Dual channel memory architecture
  Four DDR3 DIMM sockets (240 pin)
  PC3-10600 (DDR3-1333)
  PC3-8500 (DDR3-1066)
  Memory non - ECC, unbuffered
  Supports up to 16 GB on 64 bit computers

  In addition, this model can support the following Intel processors;

  Maximum frequency of the processor of the heart < = 2.93GHz
  Intel Core i7 - 8xx (Lynnfield core)
  Intel Core i5 - 7xx (Lynnfield core)
  Intel Core i5 - 6xx (Clarkdale core)
  Intel Core i3 - 5xx (Clarkdale core)

  If you do not have to worry about the update of the BIOS, there is no updates available for your computer BIOS. Honestly, I return the incorrect memory and upgrade to a minimum of 8 GB of RAM. Then, if it solves all your problems, you could also upgrade the processor.

  As the computer is nearly 4 years old, you can consider a factory HP restore to return the computer to a facoty as State. In many cases, it returns original full speed of the computer. The reason why this helps, because the BONE is swollen and clogged over time.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• High utilization of the processor after installing the HP printer

  My computer is running Windows XP. When installing recently my computer HP printer failed complete installation on the supplied CD.

  Then I noticed a dramatic slowdown in the speed of the computer.
  I uninstalled the HP from the disk and was able to install the printer using the HP Web site.
  Since my computer is very slow to start. While they inspected the Task Manager, I noticed that Explorer.exe uses sometimes up to 100% of the CPU. How can I fix it?

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Thin client HP zero t310: what is a difference of C3G80AA #AKR and C3G80AA #ABD

  Can somone help me, what is a difference between HP Zero Client t310 with PN C3G80AA #ABD and PN C3G80AA #AKR?

  Are there differences in hardware? On the HP site I didn't see any difference, but I don't know what the difference between this 2 PN...

  Sorry for my English, I'm from Slovakia.

  Thaks for help.

  Hello

  far as I can tell there is no difference and characters after the sign # is the ID of region code as far as I can tell...

• difference between materailized and a table

  Hey hiii
  
  I want to know what is a difference between a materialized view and that is to say a table suppose I create a table and another table B on the table, I created a trigger that will download all changes made to A, it IE insert, update or delete while it will perform all actions that a materialized view can perform on one or is there a difference between them
  
  
  
  Thks

  In this case, MView will be much more robust and reliable, because it is designed for that you use coding the trigger. You will manage all possible exceptions and lock the trigger claim everything is Oracle build-in MView. And also, MView can be much more powerful.

  Nicolas.

• Difference between Flex Builder and Flex SDK

  You can tell me all what is a difference between in flex Builder and the Flex SDK kit?
  
  Thanks in advance...
  
  JaxNa

  Simply click on the exe of flex plugin, and it installs.