What is the measure to take to get my card to work with my hard drive that I just put in?

Similar Questions

• What is the best format of proxy to use when you work with S - Log in a linear colourspace?

  I worked with a few images from Sony F55 shot against a green screen. I work in a 16 bit s - rbg colourspace

  I did out of the source proxies that were photo-jpeg SBDAs, nice fast n.

  However, it is fixed the color values in the proxy with what looks like an s-curve that did eventually my overlay significantly different parameters (IE much more contrasted) when switching between the proxy and original.

  So, what would be the best way to go on the conversion of some sequences of newspapers-s to a fast proxy format without messing with settings main effects by such an amount of annoying. I can live with a small difference of course.

  Thanks in advance.

  Since you are seized, I work with the original film, not proxies and just deal with the problems of time.

  You will not get a precise key with a proxy... which is what you need.  Or you COULD work quickly and with no more worries with a proxy and get an incorrect key, but I doubt that is your goal.

• I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

  You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

• What is the measure of the value "Waiting" in AWR report?

  Event	Expected	% Time - out	Wait total (s) times	AVG wait (ms)	Waiting for /txn
  SQL * Net more data from dblink	406 747		466	1	184.13
  reading of scattered files DB	28 659		330	12	12.97
  SQL * Net message from dblink the	30 115		254	8	13.63
  log file parallel write	21 021		177	8	9.52

  Hi all

  As the example below, I question what is the measure of the value "Waiting" in the section "event wait" AWR report?

  Because "Expected" the value is high, but "Queue time Total (s)" is low. example "SQL * Net message from dblink the" a 30 115 "expected' but 'Queue time Total (s)' lower 'DB file scattered read' w 28 659 'wait '.

  Could you please explain more about the value "waiting"?

  Thank you

  Hiko

  taohiko wrote:

  Event	Waits	%Time -outs	Wait total (s) times	Avg wait (ms)	Waits /txn
  SQL * Net more data from dblink	406 747		466	1	184.13
  reading of scattered files DB	28 659		330	12	12.97
  SQL * Net message from dblink the	30 115		254	8	13.63
  log file parallel write	21 021		177	8	9.52

  Hi all

  As the example below, I question what is the measure of the value "Waiting" in the section "event wait" AWR report?

  It is simply a... count the number of times where the system had to "WAIT" on the specified event.

  Because "Expected" the value is high, but "Queue time Total (s)" is low. example "SQL * Net message from dblink the" a 30 115 "expected' but 'Queue time Total (s)' lower 'DB file scattered read' w 28 659 'wait '.

  Watch "AVG time-out.    In one case, there are fewer occurrences of the event, but the average wait by event time was higher.

  If I buy 3 burgers and pay $1000 each

  or I buy 500 burgers and pay $1.00 each.

  Why 3 hamburgers cost more than 500 burgers?

  Could you please explain more about the value "waiting"?

  "Waiting" is the number of times that the system had to wait for the named event, during the sampling period.

  "Total wait time" is the total time (measured in seconds) spent waiting on all occurrences of the specified event, during the sampling period.

  "Avg" wait"is the time (expressed in milliseconds) means spent on each occurrence of the specified event, during the sampling period.

  It seems pretty obvious.  You count how many times it happens something (wait), you measure it, time spent doing this something fracture (total wait time) and tells you the total time spent (total wait time) by the number of times it happened (waits) to find out the average time spent on each occurrence of that something.

  Thank you

  Hiko

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• How can I get the music in iTunes? After saving my iPhone on a new hard drive, how to make music in iTunes?

  I'm trying to get songs from my iPhone to my macbook pro ' after saving my iPhone on a new hard drive, I want to put these songs on iTunes

  Your i-device was not designed for unique storage of your media. It is not a backup unit and transfer of media has been planned with you keep a master copy of your media on a computer that is itself saved separately against loss.  To use a device with a different configuration, you pass the old library from a computer or a backup directly in the new configuration, not the device to the library. Synchronization of media isn't a way, computer to the device, update the contents of the device to the content on the computer, update or restore the content on a computer. The exception is iTunes Store purchases that can be transferred to a computer.

  Redownload or transfer your iTunes Store purchases an iPhone, iPad or iPod to computer - https://support.apple.com/en-us/HT201267 - 'this feature only works for content purchased from the iTunes Store. From iOS9 is more apps that now need to be re-downloaded directly from the store.

  To transfer other items from an i-device to a computer, you will need to use third-party commercial software.  See this document in turingtest2: recover your iTunes library from your iPod or device iOS - https://discussions.apple.com/docs/DOC-3991 even this method can fully recover what you originally had in the library. For example, in order to save space during synchronization if you had converted music files at a lower rate, or photos at a lower resolution, it is these lower quality files that will pick you up.

  If you subscribe to the Apple music, titles that are not part of the content that you have purchased or downloaded may not be transferred and must be downloaded directly from iCloud.

• What is the best way to transfer pictures from an old computer to a flash drive or a drive back then to a new computer?

  What is the best way to transfer pictures from an old computer to a flash drive or a drive back then to a new computer?

  The easiest and most reliable I've found is to make the direct drag-and-drop method.

  (1) on the old computer, open your Windows Explorer and go to your photos.

  (2) open another Windows Explorer window and access your 'Computer' folder and in your flash drive

  (3) drag the photos to the flash drive.

  (4) take the flash drive on the new computer and drag them into your images folder

• HP workspace: what is the minimum bandwidth required for cellular and Wi - Fi connections with HP workspace?

  Hey everybody,

  What is the minimum bandwidth required for cellular and Wi - Fi connections with HP workspace?

  Thank you

  Bill

  Although there is no minimum required to run the HP workspace, a 4 G LTE cell phone or higher data network or connection to Wi - Fi network with a bandwidth of at least 1 megabit per second is recommended.

• I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

  Bookmarks are stored in a file called places.sqlite in the profile folder.
  To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox

• What is the largest hard drive that will work in dv6324us laptop computer?

  What is the largest hard drive that will work in a HP Pavilion dv6324us laptop?

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01035677.PDF

  Support for HARD drives and capacities are listed in Chapter 3, page 3-25.

  Personally, I think you could install a SATA II 320 GB to your laptop.  Maybe even a 500 GB.

  You could also probably install a drive of 7 200 rpm for better performance or if the battery life between charges is more important for you, then stick with a disk of 5 400 rpm.

  Paul

• What is the maximum amount on a Micro SD card

  Just recently bought the Tablet removable 10-n113dx of HP Pavilion x 2 and love it. My investigation is, I know it comes with built-in 32 GB. So, knowing this, what is the maximum amount on a Micro SD card that I can use on this product?

  JA95606 wrote:

  Yes, I am aware that MEM is not a SD card, I want to add a SD card to install more programs on my tablet, and I wanted to know what is the micro sd card maximum that I can use, or not at all?

  I doubt that you can use an SD card for such.

• What is the difference between Windows Web Server VS. Windows 7 with IIS

  What is the difference between Windows Web Server VS. Windows 7 with IIS

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet Forum. Please post your question in the TechNet Forums Windows Server général.

• How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  Hi baldwinj,

  Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

  HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

  Download drivers and software

• What is the maximum. Size (GB) and RPM HARD drive that works in a Compaq CQ62-219WM laptop PC?

  What is the maximum. Size (GB) and RPM HARD drive that works in a Compaq CQ62-219WM laptop PC? Want a 750 GB 7200 RPM.

  davidljtn44

  Hello

  1. RAM: please look at this: (total 8 GB max).

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Presario+CQ62+series/Presario+CQ62-219WM-upgrades.html

  2. HARD drive: no problem. It can use 750 GB 7200 rpm or more.

  Good luck