What is the operator because not more then

Similar Questions

• What turned on system indicates the operating system not found

  nothing is happening not as it usually won't do anything this is just to give us the message PXE - E61:MEDIA TEST FAILURE, CHECK CABLE AND PXE - MOF: OUT BROADCOM PXE ROM OPERATING SYSTEM NOT FOUND

  * original title - when I pass my mother in the cell of the Act in this respect is to come with the operating system not found and won't let us do anything *.

  Hello

  / Settings (BIOS/CMOS) often F2 as you start - set the boot to C: drive order
  1. as it is probably trying to boot to a network device.

  If it does not help check with the system manufacturer's support.

  I hope this helps.

• The action "Watch Me Do" has encountered an error. The operation could not be completed. (OSStatus error - 50.)

  Morning,

  • Material: Apple Macbook Air 13 ", mid-2013. 1.7 GHz Intel Core i7. 8 GB 1600 MHz DDR3. Etc...
  • El Capitan software to. 10.11.2
  • Automator to. 2.6 (419)

  I'm trying to automate downloads via iTunes take place during early in the morning to avoid using bandwidth more expensive. The operation (my apologies if I have the wrong terms, not a tech guy) fails and returns this error:

  The action "Watch Me Do" has encountered an error.

  The operation could not be completed. (OSStatus error - 50.)

  

  Is that what everyone has seen, or to which there is a known solution?

  Concerning

  James

  Watch Me Do is designed to replay the same click of mouse and keyboard events to the same speed.  Think of driving your car to work and record each turn and stop.  Then play each round and down at the same speed.  What to do if while reading the traffic moves a little faster or a little slower?  If you drive the same route to work, you could get a red light at an intersection that you had a green light to yesterday.  "Watch Me" does not know how to deviate from these changes, so he'll just to stop and report an error.  If iTunes launches slower or an event during playback takes longer to achieve because of different background running processes, it will have the same effect.

  Allowing automatic downloads in iTunes and help Automator to activate your device network at a specific time might be a better solution.

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• "cannot complete the operation because the file or folder already exists.

  Hi all

  Just spent in ghettovcbg2 and I must say it is indeed very nice.

  Just a small question though.

  It's not like it is possible to do multiple backups per day?

  I get the error "cannot complete the operation because the file or folder already exists.

  (1) is it only possible to make 1 backup per VM a day?

  (2) can I save to NFS I don't store files in the ESX Server data store?

  It should work automatically, this is more than a warning. You should be able to run more than one backup per day? If that is not the case, please read the FAQ here - http://communities.vmware.com/groups/ghettovcbg2 and then to provide me with the details requested.

• "Cannot change the priority. The operation could not be performed. Access denied. "

  When you attempt to change the priority of a process in the Task Manager (no matter what process, I've tried a few) I get the error message: cannot change the priority. The operation could not be performed. Access denied. It is while being logged on as an administrator. Would appreciate a solution.

  Since Windows Vista and Windows 7, a logon administrator account always uses a standard or limited account for certain purposes. To access these properties, you can run a program using the "Run as administrator". To run as an administrator, you right-click on a program and select "Run as Administrator" in the right click menu.

  Some processes of the system, such as services, you cannot change even as an administrator.  Come on in "show processes from the user all the" which will ask for permission. Then reopen the task Administrator Manager and then see if you can change the priority.

• My wireless mouse just stopped working. I can still use the mousepad however. I changed the batteries does not. Then I tried another mouse wireless, and it didn't work either.

  My wireless mouse just stopped working.  I can still use the mousepad however.  I changed the batteries does not.  Then I tried another mouse wireless, and it didn't work either.  What can I do next?

  Buy an inexpensive wired USB mouse for less than $5 and see if it works.  As far as I'm concerned wireless mice are more trouble than they are worth.  YMMV :-)

  Good luck.

• "The operation is not allowed" error when you click on the SUBMIT"" button.

  I created a form in Acrobat 9 with a "submit" button in order to send the entire form by e-mail.  Under the export format, the PDF the complete document option button is selected.

  The submission is a hidden button until the user presses a button (accepting a warning in the codument; irrelevant); then the Send button appears and can be clciked on. It works very well

  It seems to not work on some browsers MS Internet Explorer or Reader 9 and will return the error "the operation is not allowed.

  The URL field is defined as

  mail to: [email protected]

  On Safari (MAC) browser, when you press the option button to display the Send button, the Send button at all.

  Any ideas?

  I have no idea about the appearance on the MAC, but submit with drive problem, it's that you must enable the form for readers to submit the entire form. There is no need to submit the entire form as FDF or XML data files are easily import the form in Acrobat. The problem with the activation of the rights of the reader, is that you are limited by the license to 500 copies. If you get more than that, you're violating the license. You can negotiate with Adobe if you plan to spend for a substantial sum. If you do not enable the rights of the player, then people should have no problem with the submission (with the exception of any mail problems - a danger of using electronic submission) and you would not have a problem with the license.

  It would be useful to know if you have created the form in Acrobat or Designer. There are significant differences.

• Save for Web and devices, the operation could not be completed

  I get this error when I save for Web and devices: the operation could not be performed.

  I saved to the web before for many more complex images, largest and without a hitch.

  I use a psd format with an image that I designed. It is no more complex than others I've done. It is small, just a horizontal navigation bar about the size of the one on Apple's site.

  I tried exporting, flattening, slicing it remove the slices.

  I think it's a problem with the application itself.

  I tried to fix my permissions, restart and held cmd, Opt, Control, Shift when starting PS to reset the settings. Any idea would be appreciated.

  Try to pass like a Flash, and then delete your backup for web Pref.

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb405012

• JTA transaction is not present or the operation is not in Active state

  Hello
  
  I am trying to execute an asynchronous bpel process. the bpel process has 5 calls to OSB and takes about 100 seconds for completion. The OSB in the BPEL calls take 90 seconds to complete. At the end of the BPEL process, after completion, I get the following error:
  
  [2010-07-22 01:56:44] BPEL process instance completed "1220007"
  [2010-07-22 01:56:44] There is a system exception during execution of the BPEL instance, the reason is "JTA transaction is not present or the operation is not in Active state. The current JTA transaction is not present or is not in Active state, when processing activity or instance '1 220 007 '. The reason is the performance of this '1220007' for instance 'BPELProcess1' process is supposed to be in a jta transaction, but the transaction is not present or in Active state, please enable debugging application server transaction logs for more information... Please see your administrator about this error. ". Please check the log file of errors for more infromation. Please try to use bpel error handlers to catch errors in your bpel process. If it is an exception system, please report it to your system administrator. Administrator could perform a manual recovery of the last non-idempotent or point of dehydration activity instance.
  
  We do not want to increase the properties of transaction-timeout in the Transaction Server - manager .xml or the orion-ejb - jar.xml, since we have other projects with synchronous process running on the same server.
  
  Can someone please suggest a solution to this problem Besides not to increase the transaction time-out?

  It's because our BPEL process took more time allotted for JTA transaction.

  Check transaction timeout in j2ee/config/transaction-manager.xml.

  If you use the idempotent or control point (all that forces of dehydration) before the time specified above, you get the error.

  While BPEL actually continues execution, he cannot commit to store of dehydration after cancellation timeout and forces.

  -Sridhar

• What does the Create action not?

  Hello
  
  I use JDeveloper 10.1.3.4 and you have questions about the action Create {color} {color: blue}.
  
  I have a data table named USERS and a corresponding VO in the data control palette. Drag and drop the original Version of users to the page as a table with the column of enabled selection, I let the user be able both to delete a selected line and create a new line.
  
  I'm new to this, but for deletion, there is no problem: drag the delete action under the control of data users VO and drop it into the table {color: green} > table facets > Selection > af:tableSelectOne - Select and node {color}, then drop the request module commit an act on the page also as a commandButton control. And the selected line can be deleted and committed deletion using these two new buttons.
  
  Similarly, I dragged the action Create {color} {color: blue} and he fell in the table {color: green} > table facets > footer node {color} like a command button. When the page is running, nothing is visibly when you click on the button create {color} of {color: blue}. I understand that you do not select a line to create a new line, so I did not put the button create in the same node with the button Delete. And I guess I'll have to create a separate page for the user to enter the values in the fields on the line must be created.
  
  What I want to know, what's this button with the action {color: blue} create {color} inside is different than a generic commandButton created from the ADF Faces Core > commandButton? If I create a commandButton control in the component palette that is empty inside. But by using the action of creation as a commandButton control, is not yet clear to me that creating would make the action inside the key. On the other hand, there must be a reason for the {color: blue} action Create {color} be there slot that VO in the range of control data for us to use. What is the reason? And that makes the action Create {color} {color: Blue}?
  
  Thanks for answering my question!
  
  
  Newman

  Hello Newman,

  If you want your new line to be available in the whole of current lines (for example to edit directly in the table, not on a form), then take a look on the CreateInsert operation. Otherwise, you need a form to edit the new line.

  Check out these links:
  [13.6 creating an entry form: http://download.oracle.com/docs/cd/B32110_01/web.1013/b25947/web_form.htm#CACECCJA] in the dev guide
  [10.4 how to add a button create on a Page | http://download.oracle.com/docs/cd/B31017_01/web.1013/b25947/bcdcpal004.htm#sthref820] in the dev guide
  [New line using operation CreateInsert | http://andrejusb.blogspot.com/2006/12/creating-new-row-using-createinsert.html] in Blog of Andrejus Baranovskis

  What I want to know is how this button with the create action that it is different than a generic commandButton created from the ADF Faces Core > commandButton?

  When you create a button for the create action, your page links are configured automatically, then a link to action to create a to-do from the iterator is added to your pageDef (and this iterator is bound to your view object).

  And what is the Create action not?

  The create action creates a new line but does not insert it in the whole of lines.

  Kind regards
  Patrik

• Connection to Firefox Sync does not work due to "SecurityError: the operation is not secure.

  Hello everyone,

  I wanted to update my Firefox Sync account from the old to the new version. Unfortunately, the login page does not load on my laptop. On my Android devices, everything works fine, so I could already put in place the new account from there, I just can not connect to my new account sync on my laptop. I use Firefox on Windows 8.1 Pro 64 bit 33.1.

  The subject: represents the loading of the landing page as usual, but by clicking on the button connect does not load the login form, just blank white box. I asked my dear friend Google who gave me some answers (seems to be a common problem...), but none of them helped me.

  The debug console displays the error "SecurityError: the operation is not secure" directly after loading on: accounts? action = signin. Opening of https://accounts.firefox.com/signin and https://accounts.firefox.com/signup also results in the same error and an empty box white. https://accounts.Firefox.com/legal/privacy works fine as usual.

  I have not found a solution to work around this SecurityError so far.

  I found another answer which finally solved my problem! Apparently the subject: in the page accounts raise this error because I configured Firefox always ask before accepting a cookie. https://github.com/Mozilla/FXa-content-server/issues/1857

  Even when weird things, but now I have to work around him.

• What is the operating system that is used for a Wii?

  Please could you help me because I write a report for my work of college on the Wii and I need to know what is the operating system, but I can't find any decent site :) Please send me the answer to the * address email is removed from private life * thanks :)

  Hi TomSmith81,

  I suggest you to have a look at Wii support page.
  http://www.Nintendo.com/consumer/systems/Wii/en_na/index.jsp
   
  All the best with your work report.
  Thank you.

• CC bridge continues to stop, says "the operation could not be completed.

  CC bridge continues to stop, says "the operation could not be completed", when I try to select some images.  I click a different folder and locking the bridge

  Hi deankirkland,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• "The operation is not allowed in the current state" message when you delete the folder

  I'm test ESXi 5.5 and mounted a datatsore of oriented export NFS in an attempt to redirect my ScratchConfig at this place. I found that I can create a folder in the datasore NFS fine but when I try to delete it, I get a message saying "the operation is not allowed in the current state. This happens on any of the files/sub-sub-sub-folders and only used account's root - I also confirmed that these directory drwxr-xr-x permissions.

  As suggested by KB1003829 which is a bit useful, but not really, I restarted the management on the host agents but it made no difference. Has anyone else seen elsewhere?

  I got this resolved, stumbling on the good guid for the NFS data store. Only after clicking around in WinSCP and realize that the NFS data store guid secondary, shorter - I then tried again to remove the original test directory and it worked.

  On a separate but similar note, then I tried to update my position zero config by applying this same guid with the command "vim - cmd hostsvc/advopt/updated updated ScratchConfig.ConfiguredScratchLocation string vmfs/volumes / [guid] / logs" (followed by a restart of the host) and it worked also.