What is the quick clone?

Similar Questions

• What is the quick way to check if the battery current sequency contains nothing or not?

  Hi all

  I have switch from C++ to the labview in a short time before. I got a code written in labview 7 someone else and I am trying to change a code in my labview 2012. In the code, there are a lot of nested structures (like sequency battery, case, etc.). Some code contains 30 batteries but not all subsequences contains controls or code. Someone when I pass in a sequence, it seems empty, but some controls or code could be hiding somewhere beyond the current view. Thus, instead of zoom current sequency block, is that any quick way to identify if the block contains another type or not? Thank you.

  It is spelled "sequence".

  Make sure that autogrow is enabled for the sequence stacked so that you don't have the problem of the code hidden beyond the edges.

  Right-click on the stacked sequence and choose replace with flat sequence.  It will extend things, but how you can see all the pictures.

  Block diagram cleanup allows to get rid of more space and clean up the code.

  If you see empty images, you can right-click on the border between frames and select merge the images.  You should also do this if you have separate frames that should not be because there is already a data dependence that determines the sequence of operation.

• What is the quick scan virus softwear

  one I have takes forever

  Hello

  With most you can set up scanning to be done automatically when the system is idle. That has added the
  level of protection is enough, it is rarely necessary to analyze after the initial analysis.

  Here's what I use and recommend:

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
  Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• error occurred in the quick clone (control files creation failed)

  Hi all
  
  I have 2 nodes ERP server running EBS 11.5.10 with 9.2.0.5 database and OS HP UX 11.11
  
  While running perl adcfgclone.pl dbTier
  
  I met the following error
  
  Check that adcrdbclone.sql
  RC-00115: not able to read temp001.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp002.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp003.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp004.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp005.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp006.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp001.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp002.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp003.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp004.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp005.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp006.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00116: error reading of dbf files. Creation of control files will fail.
  
  
  a later part of the log file
  
  
  Creating the database DVP_test control file...
  
  
  SQL * more: release 9.2.0.5.0 - Production on Sun Jan 11 18:29:27 2009
  
  Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
  
  Connect to an instance is idle.
  ORACLE instance stops.
  Connect to an instance is idle.
  ORACLE instance started.
  
  Total System Global Area 598700552 bytes
  Bytes of size 737800 fixed
  419430400 variable size bytes
  167772160 of database buffers bytes
  Redo buffers 10760192 bytes
  
  Created control file.
  
  
  Database altered.
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp001.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp002.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp003.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp004.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp005.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp006.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  but when I query v$ tablespace temporary tablespace TEMP shows no temp1
  
  even on my production system temporary Tablespace is TEMP
  
  When I see the alert file
  It is said
  
  
  
  Tablespace 'TEMP' #2 found in the data dictionary,
  but not in the controlfile. Adding to controlfile.
  File #143 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00143" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #144 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00144" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #145 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00145" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #146 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00146" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #147 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00147" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #148 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00148" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #149 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00149" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #150 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00150" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #151 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00151" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #152 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00152" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #153 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00153" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  
  
  How can I get out of this confusion?

  Looks like your scene preclone directory is not correct (corrupted), and I think that it is because preclone does not run successfully.

  Either you follow the steps described in the following notes to change the existing to a new undo tablespace or run preclone and copy the files again.

  Note: 431652.1 - how to change the Undo existing Tablespace to a new Undo Tablespace
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=431652.1

  Note: 1013221.6 - RECOVERY of a file of DATA LOST IN an UNDO TABLESPACE
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=1013221.6

  Published by: hsawwan on January 11, 2009 22:17 - change the 2nd number of the Note to 1013221.1 to 1013221.6

• What happened to my show desktop icon in the Quick Start menu when I upgraded to Firefox 4?

  I value and often use the button SHOW DESKTOP which has always been in my QUICK START MENU... until I recently upgraded to the latest version of Firefox because he promised to be faster (and my experience online in spite of paying for "high speed" is anything but fast!). I see that the icon was not just moved but DELETED and I'm not at all happy about it. What happened and how I get it back? Thank you. (By the way, I don't want a fancy with a bunch of words irritable instructions. I need the answer in a format that can follow a student of 1st year. (Thank you.)

  You can create a new shortcut easily enough. Just drag it into the Quick Launch bar on with the right mouse button and then choose "Create shortcut here" from the menu you get.

• What is the difference between the Test send, batch send and send quickly in e-mail?

  Hello

  What is the difference between the Test send, batch send and send quickly in e-mail?

  Thank you

  Rahul Bhambri

  Hi Rahul

  Shipping of lots: the option to send batch to create a campaign and send an email directly from the email editor.

  Fast-track dispatch: does not give rise to statement and when you send in a test by sending e-mail quick option its look like live image.

  Test send: sending e-mails to test that this function allows you to send a test email and validate the email to make sure that there is no problem with him before his deployment.

  Thank you

  edynamic expert Eloqua

• Cloning by rman on a different server with the directory structure different and different DBNAME in EBS 11i using quick Clone

  Hello

  We want only DB (not apps) cloning through PROD rman, step TEST EBS 11i using quick Clone without taking downtime of PROD (i.e. No. BKP COLD).

  Source and target are on different servers, different file structure and the different database name.

  Kindly let me know the detailed procedure?

  Kind regards

  RR

  
  

  You can use this simple method that I am.
  

  
  

  Take backup of production with rman:

  {

  overlap archivelog all;

  backup format compressed backupset database tag PROD_FULLBKP ' / u10/PROD1_L0_BKUP_20131125/PROD_DB_set%s_piece%p_%T_%U' filesperset 15;

  SQL 'alter database backup controlfile to trace. "

  SQL 'alter system switch logfile;

  SQL 'alter system switch logfile;

  SQL 'alter system switch logfile;

  overlap archivelog all;

  backup as compressed backupset archivelog all delete input PROD_ARCHBKP format tag ' / u10//PROD1_L0_BKUP_20131125/ARCH_PROD_set%s_piece%p_%T_%U' filesperset 20;

  backup format ' / u10/PROD1_L0_BKUP_20131125/PROD_ctl_%T_%U' current controlfile;

  }

  
  

  Move the backup on the test server:

  SCP /ftp

  Modify the pfile to the test server:

  Parameters such as:

  db_name

  control_files

  modify the pfile to match the location of the test server

  Add this parameter

  db_file_name_convert = ' / PROD_datafile_location/datafile ', ' / test_datafile_location / data ', ' / PROD_datafile_location/tempfile ', ' / test_datafile_location / data.

  log_file_name_convert = ' / PROD_redofile_location/ONLINELOG ', ' / test_redofile_location / data ".

  Start the DB:

  Start the db in nomount:

  startup nomount.

  Connecting to rman and start to restore:

  Auxiliary RMAN.

  RMAN > run

  {

  allocate auxiliary channel a1 device type disk;

  allocate auxiliary channels a2 device type disk;

  allocate auxiliary channel a3 device type disk;

  allocate auxiliary channel a4 device type disk;

  data duplicated in the PREPRODUCTION backup location ' / u10/PREPRODUCTION/oraR12/clone_backup/PROD1_L0_BKUP_20131125 ";

  }

  OR

  If you specify time/perform a recovery of time based, like below:

  RMAN > run

  {

  allocate auxiliary channel a1 device type disk;

  allocate auxiliary channels a2 device type disk;

  allocate auxiliary channel a3 device type disk;

  allocate auxiliary channel a4 device type disk;

  data duplicated in PREPRODUCTION backup location 'LOCATION_OF_BACKUP', until ' TO_DATE (7 July 2012 09:45 ',' DD/MM/YYYY HH24:MI:SS') ";

  }

  Concerning

  Karim

• What is the difference between the model and its clone in VMware?

  What is the difference between the model and its clone in VMware?

  Clone

  A clone is a copy of the virtual machine.

  You can't convert back the cloned Virtual Machine.

  A Clone of a Virtual Machine can be created when the Virtual Machine is running

  Cloning can be done in two ways: Clone full and linked Clone.

  A full clone is an independent copy of a virtual machine that shares nothing with the parent virtual machine after the cloning operation. Continuous operation of a full clone is entirely separate from the parent virtual machine.

  A linked clone is a copy of a virtual machine that shares virtual disks with the virtual machine of parent on a regular basis. This preserves disk space and allows multiple virtual machines to use the same software installation.

  Cloning of a virtual machine can save time if you are deploying several similar virtual machines. You can create, configure, install the software on a single VM and then clone several times, rather than the creation and configuration of each virtual machine individually.

  Model

  A model is an original copy or a reference image of a virtual machine that can be used to create many clones.

  Models can be turned on or edited and are harder to change than usual of virtual machine.

  You can convert the model to the Virtual Machine update model base with the latest released patches and updates and to install or upgrade any software and still convert to template to use for the future deployment of Virtual Machines with the latest patches.

  Convert virtual machine model cannot be performed, when the virtual machine is running.  Only the Clone to the model can be performed when the Virtual Machine is running.

  A model offers a safer way to preserve a virtual machine configuration that you want to deploy several times.

  When you clone a virtual machine or deploy a virtual machine from a template, the cloned virtual machine resulting is independent of the virtual machine or the original model.

• No output in Onyx2 during the deployment of a clone using the commissioning of NetApp &amp; cloning - create a quick Clone in vSphere 4.1

  I am recording the Onyx2 PowerCLI 4.1 vSphere client format output. I'm trying to run a NetApp Flexclone of deployment using the commissioning of NetApp & cloning - create quick "clone" from the context menu.

  As I went through the wizard Flexclone, all right, but when I finished the wizard vSphere watch clone task works, but there is no output in the window of Onyx 2.0.

  Is it possible to capture this information in Onyx, I need to automate / schedule a task to do this on a daily basis.

  Any help is appreciated.

  Kind regards

  Scott.

  Onyx allows you to capture the API public vSPhere.

  This rapidclone use vSphere public API?

  This feature is not expected in the NetApp PowerShell module?

• What are the causes my print spooler continues to operate, and quickly stop again when I restart it? Lexmark P4350 - Windows 7 Edition home premium

  What are the causes to stop working during printing and stop again shortly after I start my print spooler. I also find that my printer takes a long time to start printing after I clicked "Print". I use an all-in-one printer Lexmark P4350 on Windows 7 Home Premium.

  David

  Hi David,

  Thank you for the update.

  Use all the dependency services?

  The solution for slow printing is the print spooler reset.

  When we press the Windows key + R, a window opens. This is called the immediate window.

  I suggest you to uninstall and reinstall the printer drivers and check. Lexmark is not Windows 7 compatible drivers for the printer. So, you can download the drivers for Windows Vista and install in compatibility mode.

  Follow the steps to install in compatibility mode:
  a. right click on the driver installation file and select Properties and then tap or click on the compatibility tab.
  b. check the box run this program in compatibility mode .
  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  Reference:
  Video: Compatibility of software and hardware in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/software-and-hardware-compatibility-in-Windows-7

  Let us know if the problem persists.

• Download Pro pc quick: what is the duration (is an annual plant or recursive)?

  Contemplating acquirng Speedy PC Pro software by download at the price of $29.95.  What is the duration of this Speedy PC Pro subscription?

  You don't have to bother. Most of these tools 'speed up my pc' is snake oil.

  There is no need to use any sort of registry cleaner at all unless you have a virus or malicious software incorporated, to which cases it is best to reinstall Windows.

  I have never needed to use any sort of registry cleaner all these years that I've been using - right Windows 3.1 up to Windows 7.

  There are tools built into Windows that will do the same things to speed up your pc without the use of such third party software.

  Read these pages on how to get your machine to a very close initial speed:

  How to make your computer run faster 6 tips to increase PC speed

  Optimize Windows 7 for better performance

• What does the community think of Type Money and silver layer to quickly support the creation of kinetic typography or the text of the Motion?

  What is the Co

  I use of models, but if you do, make sure just that everyone uses the same and don't try and pass your own original work. Without a link to these models, I don't know what they are. Google brings nothing useful.

  For all of my animations Kinetic style that I have about 80 predefined animations that use expressions based on, in, and off-peak for layers. They add timing cursors to the layers. I create my project in Illustrator organisation layers in their Center rest in its position, because all my preset animations bring a view layer, let rest until just before the out point of the layer, then a flight out of the frame. I import this model of AI multi layers (usually one for each file have for each paragraph of copy, sometimes one for every sentence, in AE as a composition with cropped layers. I add an audio track I ran the speech recognition with a text file to copy in Premiere Pro to the comp. This puts markers on the audio track with the embedded words, then I cut all the layers of 3 seconds, sequence layers, then fall into my preset animations. I adjusted the points and output layers to correspond with the words, apply the appropriate animation preset as flyInRightBounceFlyOut or SpinDownSwintSlideOutRight to each layer, refine the date a bit, add any style or the adjustment of the colors to the project and then, for the most part, without ever launching a preview ram for more than a second or two, send the project for the rendering.

  The trick to almost all of this kind of animation is advance planning to production. Most of my work is involves a custom text so that most of the models are useless. Some time ago, I hit one of these projects in approximately 3 hours, including writing and recording of the audio track. Made by hand by using keyframes would have taken about 3 days. Adapting a model project could not possibly have taken less time than to use my preset animations. I would say that if you don't buy a model of you know if adjusting the calendar requires to move keyframes manually and if the animations can be saved as animation presets so you can build your own library.

  Just for fun, here's a preset for you to try. Simply adjust an in and out point of a layer, drag it to its rest position and then to apply the preset.

  https://www.dropbox.com/s/tewk9s88mpkmnou/flyInBounceDropOut.FFx?DL=0

• Quick question: what is the difference between graphic elements and the movie?

  What is the difference between the two symbols: graphics and movie clips? They both contain frames... ?

  video clips can be

  instance names: so they can be ordered through actionscript

  applied filters: drop shadow, glow, blur, color adjust etc.

  applied of blending modes: difference, screen, lighten, Darken, etc..

  3D transformations

  graphics card:

  None of the above

  the practical reason only to use a graph is the reason jdehaan said. an internal animation graphics can be rubbed through the main storyline. graphics will move forward only when the main scenario for advances. When the main timeline stops... Graph stops.

  clips on the otherhand are supposed to run independent of the main timeline. so you can have a timeline of the HAND with a single frame and inner movieclip animation will work constantly.

  also, via the properties panel, you can tell a graphic to get stuck on a certain range or a set number of times in a loop.

  Always use some movieclips unless you have a reason not too. as kglad said it will save you and other very difficult in the future.

• How can I do the quick filter Toolbar NOT search in type-I?

  Research during the strike makes it extremely slow search. I would prefer if it seeks ONLY when I hit enter and NOT while I type.

  https://support.Mozilla.org/en-us/KB/quick-filter-toolbar

  There is no way I know of to freeze the quick filter search until you press ENTER.
  It dynamically adjusts the list according to what has been entered, and how broad you are looking.

  TB built in functionality 'search Messages... " you wait for you to press on enter. You can search for a single file, or the parent folder and all its subfolders. It uses the same list of filter as the message filter criteria.
  "Edit - Find -"Find Messages... ', or
  Right-click any folder in the folders pane, and select 'search Messages... »

• What is the best solution when my external drive for Time Machine is full?

  Hello

  I use the latest version of Mac OS X on my iMac 27 ". I use a drive outside of 3 TB G-Tech for Time Machine backup. Due to my recently many RAW photo images, I have less 8% left storage on my external hard drive, so I'm trying to figure out next steps in what concerns the strategy of external storage and have the following questions:

  • When my external drive for Time Machine is full, it is my understanding that older backups on external hard drive will be deleted to make room for newer backups. If the oldest backups contained pictures (whose records have not changed since the time they are initially stored), then I guess that these photos will be removed from the external drive - correct?
  • If I had to replace my external drive for Time Machine with a new external drive which is as big or bigger than the one it replaces, what should I expect on the size of the initial backup on the new drive? I guess the size of the backup would be exactly equal to the current amount of storage used on my drive hard iMac - correct?
  • Would it not be possible to connect the external drive for Time Machine existing at a new Time Machine external drive so that when the original disk is full, the overflow will be automatically stored on the new external hard drive for Time Machine? (If feasible, it seems that this strategy would maximize my external storage capacity vs just replace external drives.)

  I realize that my first two questions are rather basic, but I don't want to make any false assumptions. The third idea is intriguing and I would like to know if this is a viable option.

  Thank you

  Brian

  older files are starting to get deleted because the disk fills up then Yes, they went

  the backup drive should ideally be 4 times the capacity of your current drive, twice is good but has its limits. Also factor in what you store: a jpeg from the web and a raw photo file are the two images, the size of a is very different. If you work in high-resolution or large native files, or audio files (record pro, no music files) or video production twice the disk fills up very quickly. If you collect photos and JPEG and mp3 files or a handful of videos not so much is necessary.

  I would keep the old drive intact if you want to replace and start over with a new drive, if that's the plan. You have the old data, you can keep it somewhere safe and have a redundant backup which you can reconnect at any time to restore from. Let the new index drive itself with new data and take if from there, in the case otherwise you can copy the backup to the new drive and set the drive as the new source of backup but personally I wouldn't copy of the data, that's my preference, it may not be yours and that's fine.