What is the real limit of RAM on card mother A7V8X-LA/Kelut-GL6E?

MoBo sheet says "memory Max size is up to 2 GB, 1 GB per slot, HP recommends a maximum memory of 1 GB, 512 MB per slot."  Computer says sheet "RAM (installed): 512 MB ax512MB up to 64 MB shared memory video memory Maximum: 1 GB (2x512MB).»

Spec sheet. mobo (2 different, but similar leaves):

http://support.HP.com/us-en/document/c00069442

http://support.HP.com/us-en/document/c00063254

Computer specs (Pavilion a610N):

http://support.HP.com/us-en/document/c00193144

So if I put 2 GB, will be that (1), (2) not work, but do not damage (for example, back when the appropriate amount is installed), or (3) do not work and damage something (motherboard, bios, whatever)?

I did a live chat with an HP 'tech' and of course got to the line of the party of (paraphrasing) "I can't tell you why, but do not.

What is the real scoop on this?  Is it possible to get a definitive answer on this without actually trying and risking damage?

TIA!

Go to http://www.crucial.com/ and use the free tool to advise Crucial memory.

Tags: HP Desktops

Similar Questions

  • DV4T-1400: what is the maximum amount of ram supported on DV4T-1400

    What is the maximum amount of ram supported on DV4T-1400

    Hello

    Max is 8 GB from the following suppliers:

    http://www.Amazon.com/memory-Pavilion-DV4t-1400-Laptop-upgrade/DP/B00NYKWWDG

    http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Pavilion-dv4t-series-%28ddr3%29

    Kind regards.

  • What is the maximum amount of RAM for the HP ENVY 15-j015sr model?

    By default, the model HP ENVY 15-j015sr worth DDR3L SDRAM 8 GB. What is the maximum amount of RAM for this model?

    Where can I find a list of the modules supported DDR3L SDRAM for this model?

    Service guide says like that

    Two clients-available/expandable
    memory module slots
    Support for DDR3L (1600 MHz)
    dual channel
    Support for 16834-MB of RAM
    in the following configurations:
    ● 16834-MB (8192 MB × 2)
    ● 12288 MB (8192 MB + 4096 MB)
    ● (8192 MB × 1, 4096 - 8192 MB
    MB × 2)
    ● 6144 MB (4096 MB + 2048 MB)
    ● 4096 MB (4096 MB × 1, 2048-
    MB × 2)

  • What is the highest speed of RAM I can install in my DV6-3112sa?

    What is the highest speed of RAM I can install in my DV6-3112sa? The factory installed is RAM PC3-10700 (1333) installed.

    I'm looking to upgrade to PC3-12800 (1600). Will this work?

    Although you are to install PC3-12800 (1600), it is unlikely that you will see gains preformance. All modules in memory system associated with this Intel card base system are listed by HP as DDR3 PC3-10600 1333 MHz.  HP dv6 PC Maintenance and Service of Guide

    Frank

  • I INSTALLED A PROGRAM ON MY COMPUTER THAT ME GIVES A DIFFERENT FROM THAT ONE KEY TO THE BACK OF THE COMPUTER YHE. WHY? WHAT IS THE REAL KEY?

    I INSTALLED A PROGRAM ON MY COMPUTER THAT ME GIVES A DIFFERENT FROM THAT ONE KEY TO THE BACK OF THE COMPUTER YHE. WHY? WHAT IS THE REAL KEY?

    I HOPE FOR SUPPORT OF MY FRIEND FROM JAMAICA

    IT IS FASTER THAN USAIN BOLT AND MORE AMIABLE THA BOB MARLEY

    Thank you

    Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

    (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

    (B) SLP COA: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

  • What is the member limit for BSO and asked ASO to 11.1.2.2?

    Hi gurus,

    I need to know what is the maximum member limit requests for BSO and output 11.1.2.2 ASO (which means that the maximum number of members can we have in the outline for BSO/ASO). Also, I need to know what is the maximum limit membership to a Hyperion Planning application?

    We are planning on creating a hyperion, planning an application that could be partitioned with ASO (target). Could you gurus please tell me is it possible? I know that oracle does not support and recommend this right now.

    Thank you

    Hello

    Please see the documentation from the link below:

    Topic:
    Database of global storage limits
    Block storage of database limits

    http://docs.Oracle.com/CD/E17236_01/EPM.1112/esb_dbag.PDF

    ASO: Please see: Page 1048.
    For the BSO: Please see: Page 1050.

    I hope this helps!

    Kind regards
    Priya

  • What is the real difference between the following procedures?

    What is the real difference between the following procedures in the DBMS_STATS package:
    GATHER_SYSTEM_STATS
    GATHER_DICTIONARY_STATS

    GATHER_SYSTEM_STATS: System statistics to describe the characteristics of the system hardware, such as i/o and CPU performance and utilization of the query optimizer. When choosing an execution plan, the optimizer evaluates necessary IO and CPU resources for each request. Statistics system helps the query optimizer estimate the costs of IO and CPU, allowing the query optimizer to choose a best execution more accurately plan.
    GATHER_DICTIONARY_STATS: Collect statistics for all items in the dictionary.

  • What is the deep memory of RAM relevant for Ae?

    This question seems not very important, but I want to know possible limits, I can get in a software like After Effects.

    What are the differences in rendering with:

    • 8 GB
    • 16 GB
    • 32 GB
    • 64 GB

    • And the part of the RAM , w previewHat happens, more memory to increase storage capacity the preview in the cache?

    • To what extent is no exaggeration to invest in memory to After Effects?

    • In a very complex project with the 3D, like the one I have, which takes 10 minutes to make the RAM Preview (in full resolution, 1080 p, 30 fps), just 1 second of video (and use 11 GB of memory RAM). For example, 32 GB or 64 GB will make big difference in this case?

    I have:

    • 16 GB 1600 Mhz;
    • Quad Core processor at 3.9 Ghz;
    • GTX 770 2 GB;
    • 240 GB SSD;
    • After effects CC 2015 updated.

    Thank you.

    If you are still running your RAM previews at full resolution, you won't have enough RAM to a certain point as your biggest comps get and more. It's the simple truth here. It's a question of workflow that can be resolved with more material, simple and clear. Otherwise I never felt it necessary to have more than 32 GB of RAM for any program I use, including EA, if of course it can be a value to do more if you work with stuff k 4 k or 8...

    Mylenium

  • What is the size limit of files for download of eSign?

    I try to get a signed 14Mo file through this service and I get a message that the size of the file exceeds the download limit. What is the large size that I can download the file?

    Hi Lisa,

    I would recommend you to reduce the file size of the document.

    Please consult the following link about the Limits of Transaction.

    Kind regards
    Rahul

  • HP Pavilion Notebook 15-p003ne: what is the maximum amount of ram I can switch to my laptop?

    I want to upgrade ram to my laptop (Pavilion 15-p003ne), which is the maximum amount of ram I can go with!

    Hello

    The upgrade of RAM MAXIMUM on your laptop is 12 GB

    Supports the following configurations:

    ● 12288 MB (8192 MB × 1 + 4096 MB × 1; not supported on models of computer with a 32-bit operating system)

    ● 8192 MB (8192 MB × 1 or 4096 MB × 2; not supported on models of computer with the 32-bit operating system)

    ● 6144 MB (4096 MB × 1 + 2048 MB × 1; not supported on the computer models equipped 32-bit operating system)

    ● 4096 MB (4096 MB × 1 or 2048 MB × 2)

    ● 16384 MB (8192 MB x 2)

    Two slots for memory (some models only) SODIMM module

    DDR3L-1600 MHz dual channel support DDR3L - 1333 MHz dual channel Max.

    DDR3L - 1600 MHz single channel Support

    See page # 3 of Chapter 1 of the link for more information below

    http://h10032.www1.HP.com/CTG/manual/c04402649

  • What is the real difference between the card and the ORDER of the member functions?

    Hi all

    According to the documentation http://docs.oracle.com/cd/B28359_01/appdev.111/b28371/adobjbas.htm#CHDFGJFB

    Control methods make comparisons of direct one-to-one object. Unlike the methods of the card, they cannot determine the agenda of a number of objects. They simply tell you that the current object is equal or less than the object that it is being compared, based on the criterion used.

    A method of control is a function of an object ( SELF ), with a declared parameter that is an object of the same type. The method should return a negative number, zero, or a positive number. This value means that the object (the implied no said SELF parameter) is less than, equal, or greater than the declared parameter object.

    I still can't find all the differences between them. Because the documentation said that makle methods to ORDER one to an object comparisons. However, you can also do it with the map member function the (as illustrated below). Can someone clarify this please?

    create rectangular type is object
    (
    number of width,
    number of height,
    Order member function camparison (r rectangular) return number
    );

    create or replace type rectangular body is
    order member function camparison (r rectangular)
    Return number
    is
    Start
    If (self.width + self.height) > (r.width and r.height) then
    Return 1;
    elsif (self.width + self.height) < (r.width and r.height) then
    Returns - 1;
    on the other
    return 0;
    end if;
    end;
    end;

    OR

    create or replace the rectangular type is object
    (
    number of width,
    number of height,
    card camparison return number of member function
    );

    create or replace type rectangular body is
    map member function camparison
    Return number


    is
    Start
    Return self.width + self.height;
    end;
    end;

    For the two I use the following block of code right? So, what is the difference?

    Set serveroutput on;
    declare
    rectangular rect1;
    rectangular rect2;
    Start

    rect1: rectangular = (3, 5);
    rect2: rectangular = (4, 8);

    If rect1 > rect2 then
    dbms_output.put_line ('rect1 Büyük');
    on the other
    dbms_output.put_line ('Büyük rect2');
    end if;

    end;

    My 2nd question is: in the function member order what is the parameter reference? When we compared how it corresponds to?

    camparison of Member (rectangular r) function order

    When comparing the two objects is the function parameter is the object of the comparison sign right?

    If rect1 > rect2 then

    Thanks in advance

    Order compare 2 objects.

    Card returns a value that can be used to control any number of objects.

  • 33 KO? What is the real file size?

    I'm new to the mac platform, and I noticed an interesting phenomenon with respect to the size of the files and swf files. I added items to a file the size of swf files flash don't take no increases KB 1 or 2 small, rather they jump from 16 k to 33KO 49KO, etc. I develop banner ads that must be less than 30 k and I can't seem to see the "real" size My college uses a PC and can see the exact file size as 30.9 KB is a finder preference or a limitation of the Mac file system?

    When test the movie in Flash go see-> bandwidth Profiler, you will see the total size of the swf file.

  • What is the correct USB 3.0 PCIE card for Z800?

    I am looking to buy the correct USB 3.0 PCIe card for a Z800, but I can't find any HP thru. Anyone has the info > 12 and 60 cards HP dollar on EBAY, but I don't know if those who are good.

    Hello

    Based on the following specifications, the machine has a lot of options:

    http://h18000.www1.HP.com/products/QuickSpecs/13278_na/13278_na.PDF

    You can buy 1 port card, map 2 ports, card port 3 or even 4 ports card such as:

    http://www.StarTech.com/cards-adapters/USB-3.0/cards/2-port-PCI-Express-SuperSpeed-USB-3-card-adapter~PEXUSB3S2

    You should check the slot to get the support of the card right.

    Kind regards.

    PS eBay is another story, you can buy some card dollars.

  • What is the maximum limit of graphics card & RAM to my system?

    Hello

    The configuration of my computer is - 945 intel motherboard, processor 1.6 GHz Intel core 2 duo, 1 GB of DDR2 RAM. I want to add more RAM and a nvidia Geforce Graphics card. Can someone advice me, up to what maximum limit, my computer with above configuration will support memory RAM and graphics card.

    Thanks in advance

    Pascale Neog

    Without knowing the manufacturer and number of full model of the motherboard, I can't give you an answer?

    Other manufacturers also make motherboards with chipset intel 945.

    The graphics card, you can use may also depend on the rating of your diet.

    The price of DDR2 memory, you might be better off getting a new motherboard and DDR3 memory.

  • TouchSmart 600-1350: what is the REAL TouchSmart 600-1350 RAM Specs?

    I see HP screwed up once again, big surprise there!

    Specification of RAM TouchSmart 600-1350 (citing the HP site):

    200 pins, DDR3 SO-DIMM

    Since 200 pin SO-DIMM is really a standard DDR2 and DDR3 is a 204 standard pins, I chose best educated guess one that suits and matches at speeds and tensions with the computer of my client for the upgrade. We ordered 2 Kingston PC3-10600 off 4 GB Max computer modules, but guess what? It don't work!

    Given that HP can't even say DDR2 DDR3 standards, can someone at HP who really knows what is up please tell me the specifications of memory live CORRECT for this system? Perhaps eventually make corrections to specifications of systems page too. Beyond that, a refund of $40 to my disappointed customer would be too big, but I not holding my breath!

    Anyway, why did 2 4 GB Kingston 204 pin PC3-10600 modules work? Normal blood pressure, nothing special...?

    Hello:

    Based on my experience, any HP PC with an Intel series 5 using portable memory chipset... it must be VERY specific with what you get memory.

    Please read this post related about this submission, in my view, that you have to buy...

    While it is a laptop, he uses the memory of the laptop and has a chipset Intel 5 series like the one you are working on.

    http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/memory-upgrade-6550b/m-p/5340551/highlight/true#M63185

Maybe you are looking for

  • How to change the color of the text only Boolean button cluster

    Hi you I try to change the text color of the Boolean button programmatically to custer. not that paticular button click right property node method bcaz of I batch button in cluster.here I have attached my sample program it will change some text color

  • What does the "Allow hybrid sleep" option in the power settings?

    Original title: power management like I asked later, my laptop after sleep don't wake me up again. I want to khow what is the meaning of "Allow hybrid sleep" option to be able to? This related to my power supply problem or not?

  • Switch apps

    So I know I've seen cela somewhere (maybe a few combo button to emulate the physical button) but I can not find it.  Once I launch my application how do I go back to the desktop or switch to another application?

  • How to specify the location of the SD card by program

    Hello I need to start the SD card at the beginning of my application, so I can write a file above. So is there anyway to do? Thank you!

  • Windows 7 switch user

    Some time ago, on a laptop running Win 7 Home Prem, the functionality of user switch started acting crazy. When you ask the user to switch, it does not find the other user, he has an empty square where this user needs to be and he says 'User' and mus