What is the shortcut on illustrator for indicating you the dimensions of your shape?

Similar Questions

• What are the dimensions of the Pocket-size images and Board Contact?

  Dimensions of the photo images print Windows 7

  No one knows what are the dimensions in the Pocket and the images of the Board-Contact format? I can't crop to fit without knowing what size I have to crop.

  Hi Weaselspoon,

  Dimensions for portfolio would be 2.5 x 3.5 inches.

  Dimensions for photos of the contact sheet should be 2 x 2 inches if you are using the Windows Photo Viewer.

  See picture printing: frequently asked questions to get answers to some common questions about printing in Windows Photo Viewer.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• What are the dimensions of the ipad2

  What are the dimensions of the iPad 2 that I own.  Can not find them anywhere.  Looks like the iPad 2 of the same size?

  iPad 2 Air care http://www.apple.com/ipad-air-2/specs/

  iPad 2 form https://support.apple.com/kb/sp622?locale=en_US

  They are not the same size.

  -AJ

• What are the dimensions of a spread of 2 pages in a photo book great connected to the 11x8.5?

  I'm building a provision tailored to a large cardboard cover, 11 "x 8.5" Apple products photo book printing.  I build my images full page in Photoshop and Illustrator and then import in Photos v.1.5 to assemble the book.  I need to know the dimensions accurate for a 2 page spread in this size of the book.

  The overall dimensions of the book are based on the format picture book. Most photo 'frames' are in the proportions of 3:4 format. The exact layout is based on the page you select in the options of picture book. It is not something that you can "import" a provision to third parties.

  If I misunderstood your question, please explain in more detail.

• What is the size of your recovery Partition?

  Hi all

  I am running with active FileVault 10.9.5 (mid 2014 retina MacBook Pro 2.2 GHz, 16 GB RAM, stock Apple SSD). At one point, I had a 650 MB recovery Partition on my internal SSD (I'm sure it was a previous iteration of 10.9). At one point, he went to 1.03 GB. Was - it due to an update or maybe something wrong? So I would like to know what size your RP is if you run 10.9.5.

  Also, I have several Carbon Copy Cloner backup on external hard drives; We started as a SuperDuper! backup and it has a 1.30 GB RP (exactly 2 x the size of a RP 650; a coincidence?). Another also began as a backup of the SD was changed to a backup of the CCC and has a PR of 650 MB. Another was created from the beginning using the CCC and its creator RP; its size is 784,2 MB. So, I want to see if one is 'correct' or if it is normal to have different sizes of RP.

  To find the size of your RP, go to utilities > system information > material > SATA/SATA Express and look down where it says "Recovery HD."

  Any help is greatly appreciated.

  Thank you!

  3:

  Apple_Boot Recovery HD

  650.0 MB disk0s3

  It's the recovery partition on my system of El Capitan clean install.  I used 'diskutil list' for this information

• What are the dimensions of the envelope sizes listed in the drop-down list?

  HP 1050 J410 All in One

  Windows 7 Home Premium SP 1 64-bit

  Microsoft Office Word 7

  New printer. My old that offered the opportunity to allow me to measure the envelope and enter the size of the custom formats. My new printer offers no custom formats and I don't know what size other than A 10 for letters.

  Where can I find the dimensions of the options available in the menu drop-down?

  Why print instructions also suggest the use of address labels instead of printing the address of the sender on the envelope? This printer has a known calibration problem?

  Never mind.  This new guarded printer kept giving error messages, that is ink.  Icons flashing.  Very noisy.  I got and will try to use my old printer.

• What are the dimensions of envelopes listed in the menu drop-down

  When printing envelopes, I'm at a loss to understand what size are the various envelopes. How can I choose?

  Hello

  Please check the following standard:

  http://www.brightprintgroup.com.au/CMS/images/stories/Envelope_Guide.PDF

  Kind regards.

• Performance tests of VSANS: what is the attitude of your cluster under actual stress?

  Our config node VSAN

  Reference Dell R730xd

  768 GB OF RAM

  PERC730

  ability level: 21 x SAS disks 1, 2 TB

  the caching level: 3 x SANDISK SX350-3200

  dedicated NIC for VSAN 10GE

  We encounter problems while driving a large number of virtual machines on our cluster which themselves generate a large number of the IOPS / s (similar to IOmeter).

  We are faced with questions:

  -guests are cranked out vcenter

  -vmx files have been corrupted

  This does not mean that if we only use one virtual machine host to generate the load. In this case, these are our observations:

  % Of reading

  Write %

  The KB block size

  Oustanding IO

  GB of file size

  # Workers

  % Randomly

  Sequential %

  FTT

  # Components

  read a book

  IOPS / total s

  Totl Mbps

  AVG ms Lat

  45

  55

  4

  5

  10

  4

  95

  5

  1

  6

  0

  8.092

  33,15

  0.6

  45

  55

  4

  5

  10

  4

  95

  5

  1

  12

  0

  10.821

  44,33

  0.46

  45

  55

  4

  5

  10

  4

  95

  5

  1

  6

  100

  12.611

  51.65

  0.39

  45

  55

  4

  5

  10

  4

  95

  5

  1

  12

  100

  11,374

  46,59

  0.43

  45

  55

  4

  64

  10

  4

  95

  5

  1

  12

  100

  29.746

  121,8

  2.15

  100

  0

  4

  64

  10

  4

  100

  0

  1

  12

  0

  50.576

  207,1

  1.26

  100

  0

  4

  64

  10

  4

  100

  0

  1

  12

  100

  50.571

  207,1

  1.26

  100

  0

  0.512

  64

  10

  4

  0

  100

  0

  1

  100

  67.330

  34,47

  3.8

  If these numbers seem very good, Don't they?

  From our point of view, it would be ok if latency increases when you increase the load with multiple virtual machines. But as already out doubled over our cluster becomes broken after increasing the number of virtual machines at some point.

  We are currently testing with a subset of four nodes VSAN with the above config. In this group, we were able to turn on 187 load generation machines before that three of the four hosts entered the State "is not responding.

  We wonder if anyone has also made large performance tests. If so, we would be very interested in comments you make. Maybe this helps us to find the fault of our construction.

  Kind regards

  Daniel

  With the help of VMware we discover that the problems we face are caused by virtual machines gen load... each vm is generating 2048 ios in circulation... so with 187 VM on the cluster, we unreal ios in circulation (382976... when I remember the graphic observation of our cluster it would reduce up to 13000 per host) which we will never see in real world scenarios. With this high traffic vsan 6.1 ios has problems and vmware is working on a solution... maybe with 6.2 and qos that is resolved?

  A few other changes:

  -a newer driver for our network cards intel x 710

  -new driver and firmware (beta version of dell) for our h730 perc controller

  and some advanced settings:

  esxcfg-advcfg - 100000/LSOM/diskIoTimeout s

  esxcfg-advcfg - s 4/LSOM/diskIoRetryFactor

  esxcfg-advcfg - s LSOM/2047/heapSize (with these parameters, we were able to create 3 starts - with 7 metal discs and 1 flash device - for each host)

• What is the status of your order?

  Ordered my pure Moto X yesterday, about an hour after that pre-orders have started. Today, I went into my email and checked the status of my order. According to the bike order status tracking site, my bike was done and my 'order is finished. If this is true, I guess to be shipped quickly.

  Excellent work, Motorola.

  Hate to be depressing, but your best advice is the shipping date that you were provided when you placed your order.

• What are the dimensions of the sansa clip 8 GB and 2 GB?

  Hello

  I would like to know if the 8 GB sansa clip is the same size as 2 GB clip. (the Player size)

  Thank you!

  All the Clips (1 GB, 2 GB, 4 GB and 8 GB) have the same dimensions.

• I use PE 13, what are the best settings for viewing a slide show on a TV

  I set up a slide show of my drawings for display on a TV.   The images are color JPEGs.   What primary settings work best for the project when it comes to watching a slideshow of images on an HDTV?   I know how to change the properties of the project, but I don't know which of the formats and options will work best to turn slideshow into a video clip.

  Genetrump

  First 13 items on what operating system? You have 13 to 13.1 updates, using Help Menu/updates to date of an open project?

  Your question immediately... assuming you have a NTSC installation...

  1. What are the dimensions in pixels of your JPEG files, and how many of them are there? Depending on the resources of the computer, how many JPEG files, and what pixel dimensions, try to use 1920 x 1080 format JPEG and the project preset elements 13/13.1 first is NTSC, DSLR, 1080 p, DSLR 1080 p 30.

  2. what type of player is has your HD TV?

  (a) if only one DVD, then your destination drive is drive DVD/record/Publish + share with preset = NTSC_Widescreen_Dolby DVD. Video set for display at 872 x 480 after encoding.

  (b) if player Blu - ray, then the publish + share/disc/AVCHD (which are a DVD disc)... can be 1920 x 1080 @ 23,94 progressive frames per second (H.264 1 920 x 1080 NTSC Dolby)

  (c) if the Blu - ray player, then publish + share/Disc/Blu-ray disc... can be 1920 x 1080 @ 23,94 progressive frames per second (H.264, 1920 x 1080 p NTSC Dolby).

  I assumed you wanted a product of disc? If your HD TV player takes support other media of the video file, what are the formats on which media supports?

  With this information, I will propose Publish + share/computer/specificities for export to files.

  Please review, study and give more details.

  Thank you.

  RTA

• What is the best switch to deploy, SG300-52 or SGE2010?

  Hi guys,.

  I am currently canvassing of switches that can be deployed in our temporary buildings as Distribution switches. I just want to ask your recommendation between the SG300-52 and SGE2010. What is the best in your experience? Features interested is the preparation of ipv6 of the switch, its features and performance (speed of transfer, LACP, stability, etc.)

  Thanks in advance!

  Zero

  Zero,
  

  
  

  Far the sg300-52, you have these functions plus text view cli coming in the next version of the firmware.  It supports more features and it's the next step for small businesses of cisco switches.  The sge2010 was the best of this last era, but in functionality, the sg300-52 summits.  Not to mention, you get your real 48 ports for connections and 4 additional ports for fiber or stacking modules that will be supported in the next firmware.
  

• What is the best TWG or Pl/Sql Table

  Hello
  
  One of the best MNC asked me a question. for example,.
  
  What is the global temporary Table table / b/w difference Pl/Sql? What is the best to maintain the data manipulations?
  
  
  Pls advise me... !!
  
  for example, it is very useful.
  
  Adv.Thanks
  Prabhu

  As usual if you search for it you would have found your answer at this time.

  He has already been asked here before and responded. The link is

  PL/SQL table for the TWG vs

  Concerning

  REDA

• What is the name of my best friend from childhood?

  What is the name of your best childhood friend?

  This is the name that I YOU typed in facing the issue of the first time.

• • 'Size STROKE' considered as spam if necessary of the dimensions of the square...

  Hello-

  I recently spent CS3 to CS5, and I noticed an annoying thing on the 'dimensions' of a shape (in this example, a simple square).

  Why is it today that illustrator® takes into account the size of the race?

  We really need in cases of "packaging" (cfr. crop marks).

  Is he died in Configure (by default) Illustrator® that it does not account for "size" of a stroke?

  I mean without the palette "Contour"?

  If you check the attachment, I would like to have the 'visual effect' of the place down, BUT with the dimensions of the square above.

  Is it still possible in Illustrator® CS5?

  The size of the place should be 65 mm and no 71, 35 mm (the difference is the size of the stroke).

  Thanks, have a nice day...

  -Dimitri

  

  Dimitri,

  Edit > Preferences > General > use Preview limits must be unticked.

  I don't know what is the default value in both versions (I am still with 10).