What is Toshiba ACPI compatible logical value?

Similar Questions

• Satellite Pro A200GE - 26Q: Question about Windows update "TOSHIBA x 64 ACPI Compliant logical value.

  Hello

  I have a Satellite Pro A200GE-26. It has a core 2 duo T7200, running vista 32 provided with the computer (now sp1).

  Windows Update offers me the following optional update: 'TOSHIBA TOSHIBA - other hardware - x 64 compatible ACPI value logical and general-purpose device' but I am concerned that at present in Device Manager, the computer is listed as "ACPI x 86 based pc.

  Does anyone know why windows update offers this for me and if I install it?

  Thanks for any help!

  This update is available for all units of Core2Duo.
  As you already wrote it is optional, and you must not install it. If you use original recovery image Toshiba you have no need for the functionality of the laptop. Using the recovery image or you have installed your own OS?

• Toshiba ACPI device driver based on added value logical and general purpose

  Had to rebuild my Satelite A40 from the recovery CD and I get a message asking me to install a TOSHIBA ACPI-Based added value logical and objective general Device Driver. He can not find a file called tvalz.sys and I can't find a download appropriate on this site... can someone advise. Thank you James

  Hmmm I think that ACPI-Based added value logical and objective general Device Driver belongs to the Toshiba common Modules.

  This utility of common Modules can be found on the European driver Toshiba page.
  Download and just install it again.

  But I wonder why you should install it after using the Toshiba Recovery CD?  :|
  The restore CD contains all the necessary drivers, so I think that this common modules must be installed. But who knows

  Try my advice and install the common Modules as shown above

  Good luck

• What dvd burner is compatible with Tecra A2

  Hello

  I want to know what dvd burners are compatible with my tecra A2 because I bought a dvd burner and does not work with the tecra A2 (IDE1 #error).
  There is nothing about it in the manual.

  Can you help me?
  Thank you.

  This #error IDE1 appears because of the evil master\slave\c-salt settings.
  All Toshiba slim line discs works in cable (CSEL) default selection mode. In other words, the player receives a signal from the laptop it say if it needs to act as a master or a slave device on the IDE channel.

  Some portable computers on the market do not work according to this specification, but use the way inverted CSEL signal to save a bit of power electric. If you are installing a drive running in standard CSEL mode in such a laptop, the inverted signal will require to work evil master/slave mode giving the reader the logical address as the hard drive installed on the same IDE channel. Accordingly, the optical drive, HARD drive or both cannot be detected by the BIOS and is not usable. Some laptops may display an error message at the start, for example 'IDE #1 error"or similar.

  In some user manuals, you can find information about compatible CD/DVD players.
  Did you check that?

  If you find any details on a compatible player then contact ASP in your country for info. You can also order such driver of these guys here.

  Good luck

• What DVD players are compatible with Equium A60 PSA67E?

  my question; What dvd players are compatible for an equium a60 (psa67e-001001en)?

  background; I did a very stupid thing! while I was at the Japan and about 18 months after buying my a60 in the United Kingdom, the packaged dvd player. I replaced it with a teac dvd player and it worked like a dream! I threw the old disk (I think it was a matsu * has, but can't remember the exact model). in any case, I came home and had a little time on my hands, so I decided to set my machine and corrupted the windows xp registry.

  Now, windows xp runs in the loop, I can't access and I need to wipe the hard drive and start again essentially. I put the recovery disk in, but the computer doesn't read him and desperately wants his wacky way to windows. I believe that it is not recognizing the teac drive that I used to replace the old. I think that if I put an original return type, the firmware can recognize the drive and I'll be back in business... or so I hope!

  of course, all the other tips would be welcome too! Thank you.

  work around? PS a work around, I thought so... copy the contents of the diskette of recovery on a hard drive (using my old computer) can change the current hard drive in my a60 with it... theory; When the computer detects the content during the start-up, it will install xp on another part of this drive and I have a working machine once again. could - this something like this work? any thoughts?

  Post edited by: markchev66

  Hello

  Did you look in the manual of the user who is usually preinstalled on your laptop?
  There you should find information.

  I found these:
  Toshiba SD-C2612
  Toshiba SD-R6332
  Matsu * a UJ-811BTJA-A
  Matsu * a UJDA760
  Pioneer DVR-K13TBA
  Toshiba SD-R2512
  TEAC DW-224TH

  It is only a part of the list mentioned in the manual. Check it!

• "The BIOS in this system is not fully ACPI-compatible" Stop: 0X000000A5.

  BSOD

  My home computer is running running windows xp for about 6 years... everything was OK until yesterday when I tried to turn it on. First it started as it does if she didn't close properly and got stuck in the loop of reboot that I did what I read on the forum... tapping F8 key and disabled the auto restart and I got the BSOD.

  It is said... the BIOS in this system is not fully ACPI-compatible... I do not understand the BIOS or ACPI

  The error message says:

  STOP: 0X000000A5 (0 X 00000011, 0 X 00000006, 0X00000000, 0X00000000)

  He also tells me to go to a website of material for a BIOS updated... but I do not understand what to download.

  Can someone please help?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/831691

  Check if that helps.

• "Stop 0x000000A5 the BIOS of the system is not fully ACPI-compatible every time as the installation of a new windows 7 integral over Inspiron 15R N5110.

  Hello

  I have installed Windows 7 ultimate 64 bit on many brands of laptops, but when I installed it on Inspiron 15R N5110, (core i5 and 4GBRAM). I faced an error at startup of windows 7 after completing the installation.
  NOTE: When the installation finished and restarted my computer, this window shown to me.
  
  
  
  Two options from the two options above I chose, I found myself with the blue screen:
  
  
  Error blue screen said something these ' BIOS in this system is not fully ACPI-compatible. Contact your system provider for an updated BIOS I don't know what that means and I don't know where is the culprit. I wish I could capture this error screen. However, it is impossible to do because I wasn't the Windows environment. 

  
  

  Even if the error related to BIOS necessary for the update, so how could I update as long as windows has not begun.
  
  
  
  
  
  
  
  
  Is there something that needs to be configured in the BIOS before installing Windows 7 on Dell laptops.
  I'm quite surprised that the previous system was windows 7, but it was Home Premium.
  
  
  The strangest thing is when I tried to start to repair the disk and even disk instillation of Windows to resolve startup problems, I found that this startup repair couldn't fix problems.
  
  
  When I tried to do these steps:
  
  
  1. Insert your Windows XP CD into the CD-ROM or DVD-ROM drive, and then restart your computer from the CD.
     Note Some computers may require you change basic input/output system (BIOS) settings before you can start the computer from a CD-ROM. For more information about changing the BIOS, see your computer documentation.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER.
     Note By default, the administrator password is blank in Windows XP Home Edition.
  5. By default, Hiberfil.sys is usually located in the directory root (C:\). At the command prompt, type del hiberfil.sys and then press ENTER.
  6. Restart the computer.
  When I arrived at "system recovery options, I saw that my system is listed, then I chose then, but I found myself with this ' this"system recovery options"version is not compatible with the version of windows that you are trying to fix." Try to use a different compatible with this version of windows recovery disk, even if I'm sure only that the same disk to install windows I have installed since.
  
  
  NOTE: I do not add RAM or other devices. There is a windows 7 Home premium and I just re installed a windows 7 ultimate 64-bit. I don't really know what the previous windows version 7 is 32 or 64 bit.
  I checked the dell forum and I found ' your computer goto your BIOS F2

  That goto advance Select ATA to instead of AHCPI save the setting, and then try to restart your Windows 7

  hope it will work. »

  But he did not AHCPI, but I found AHCI and let ATA instead of AHCI, but no difference that happened.

  Hello

  Check the steps suggested by LoneWolf1983 from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/stop-BIOS-not-fully-ACPI-compliant/25210db0-5491-4fc8-99c2-ec0361dd8388

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Thank you very much

  I checked this thread, and I found this solves the problem

  I have changed the serial port in the BIOS for 2F8/IRQ3 and I have not had a blue screen since... fingers crossed, it's her!

  But as you know that no matter what BIOS are different from others.

  Thus, I have not found any serial port in the BIOS to be replaced by 2F8/IRQ3

  NOTE: My problem is when you install a new version of Windows.

  In addition, every time a new windows installation 7 and facing the Blue error screen, I started to Macrium Rescue CD and clicked "fix windows startup", and then when restart my windows, I was not facing the the Blue error screen. If windows starts successfully.

  If the blue screen error was tied to the BIOS, the Refelct Macrium rescue CD wouldn't no matter what (not know this problem)

• 11g DB with the "compatible" parameter value "10.1.0.

  Hello world
  
  I have a upgrade from 9i to 11g r2 database. compatible in this database parameter has been defined as "10.1.0. for this reason, I can't use - for ex-'invisible clues' because they have at least 11.0.0 compatible parameter value.
  
  now I want to change this setting, but I'm not sure what would be done by this action, exactly.
  
  for example, Tom said: "you cannot use some new features like compression table OLTP.
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:1203932400346694094
  
  I know invisble index is also depend on this but what else? I couldn't find a sort a list of it. y at - it all? or someone who knows?
  
  Thank you very much.

  OPTIMIZER_FEATURES_ENABLE acts as an umbrella setting to activate a series of features in a version number of Oracle-based optimizer.
  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/initparams165.htm

  compatible
  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/initparams034.htm
  http://docs.Oracle.com/CD/E11882_01/server.112/e25494/create005.htm#i1014800
  http://docs.Oracle.com/CD/E11882_01/server.112/e23633/changes.htm#I638061

• P6-2380EA: what graphics card is compatible

  You are looking to play Elite space sim and need to know what graphics card is compatible and works well.
  
  I am naïve.

  You must use a PCIe x 16 graphics card. If you want one with all power, you also have to replace the power supply with a 400 Watt unit that has power connectors POCIe-6 and 8 pins.

  Your desktop PC is fairly new OSB which will alow you to use modern video cards that support UEFI BIOS.

  Go to the Can I run? Web site for recommendations on video cards.

  https://www.Google.nl/URL?SA=t & rct = j & q = esrc s = & source = web & cd = 1 & cad = AJLN & uact = 8 & ved = 0ahUKEwj_qZLUiajPAhVLiRoKHYl7B9oQFggeMAA & url = http %3% 2F % www.systemrequirementslab.com%2F 2F & usg = AFQjCNEdydS3pxgs3cxMBpee3DAID65Sig & sig2 = 3yEREz890FkFkK8NM7GsdA

  NewEgg.com seems to be a salesman for the United States and the source for the video cards and the PSU's popular online.

  http://www.Newegg.com/desktop-graphics-cards/subcategory/id-48

• What hard drives are compatible for a Satellite L300-1AP?

  My HARD drive is somehow broken :( What hard drives are compatible for a Satellite L300-1AP so that I can something eBay?

  Thank you.

  Hello

  Satellite L300 supports SATA HDD!
  SATA controller having no physical limit, you should be able to use any HARD drive 2.5 SATA. So, for example, a 500 GB 2.5 SATA 5400 RPM HARD drive should be compatible.

  Welcome them

• What graphics card is compatible with my presario sr1710nx pc.

  What graphics card is compatible with my presario sr1710nx pc?  The current one is dead and I get nothing on my screen and I tried to connect another monitor and still nothing.  So I guess it is the graphics card.

  Hello:

  It is an old model.

  The form of State that he took (integrated graphics).

  If you are sure it is just the graphics that is kaput (you would like to know if you can hear the Windows startup and logon music sounds or something) then...

  I'd get a used Dell Radeon HD 2400 on eBay that should work for you very well, but you will need to have a monitor with a DVI connection and DVI cable.

  This is the cheapest I could find.

  http://www.eBay.com/ITM/ATI-Radeon-HD-2400PRO-256MB-PCI-Express-video-card-ATI-102-B17002-B-used-/121232926546?PT=PCC_Video_TV_Cards & Hash = item1c3a0ba752

• Satellite 1800-514: what FL inverter is compatible

  What other Toshiba can I take the inverter of to adapt to a satellite 1800-514

  If someone posted check if please http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true and request technicians.

• What operating system is compatible with PaperPort Professional 12, Dokmee home 3.2.0.17 and BlueDoc?

  What operating system is compatible with Port Professional 12, Dokmee home 3.2.0.17 and BlueDoc paper?

  Hello
  I suggest you refer to the following article provided by the manufacturer of the program.
  http://www.nuance.com/for-business/by-product/PaperPort/professional/index.htm
   
  It would be best to contact Nuance for help.
  Shade support: http://www.nuance.com/support/PaperPort/index.htm
   
  Hope the information is useful.

• What NI GigE Driver compatible with Intel Chipset HM77 Express in Mobile (a) or (b) Mobile QM77 Express Chipset Intel?

  High seeds Image Acquisition from GigE Vision cameras OR use software OR Driver compatible some hardware, for example. as NI PCIe-8231 (1 port PCI Express inserted) that uses the Intel 82572EI Ethernet interface circuit. I have a desktop system using stuff that works excellent. I would use a laptop. Dell said that their books have b Mobile Intel HM77 Express Chipset or Mobile Intel QM77 Express Chipset (b). What the reader OR compatible with either of these chipsets? Thanks for your time and your efforts.

  See the following doc:

  Acquisition from GigE Vision cameras with Vision Acquisition software - part I

  http://www.NI.com/white-paper/5651/en

  Compares the universal to the pilot of high performance,

  specifically both offer the same bandwidth 125 MB max but the driver high performance takes advantage of the chipset intel pro1000 to unload part of the CPU load, once again, it's less important that processors become faster.

  "The benefits of.
  While the high-performance driver provides better performance of CPU compared to the universal driver, it will work on the chipset Intel Pro 1000 Gigabit Ethernet cards. The universal driver can run on any card Gigabit Ethernet is recognized by the operating system. CPU utilization during the acquisition will affect the CPU cycles available for image analysis. If your application requires a treatment online, so it is better to invest in a Gigabit Ethernet card with chipset Intel Pro 1000 as the NI PCIe-8231. While the driver of your choice affects the CPU usage, it does not limit the maximum possible bandwidth. Each driver will be able to achieve the maximum bandwidth of 125 MB/s."

• What is the best compatible microSD and the maximum capacity for a Tablet android Iconia 10 One?

  Could someone tell me what is the best compatible microSD and the maximum capacity for a Tablet android Iconia 10 One?

  Two possibilities: perhaps the message is that your actual RAM is low, which means that you are trying to run applications too at the same time. Closing some should help a lot. The other is more likely, and that is the internal memory which is running low. There is a lot that can be done to help that, but it is especially dependent on what is causing the space to fill. If this is a case of too many installed applications (when applications are installed by default, they are going to the internal storage, the SD card is generally used only for data), one or more of the app that fills with things very with log files or personal always data in memory instead of on the DD of the.

  Check first for the last. Make sure that your photos, videos and music are all on the SD card. If you find tham in the internal memory, move them. Make sure you say the applications that use where is the new location.

  Then find the application specific data when it shouldn't be. Many file managers will do for you, you are looking for by flying over or logfiles extra-large. Parameters; Applications; Application Manager (or similar, names depend a bit on OS version) should allow you to look at each application data and cache. Those compensation where appropriate will free up the space.

  Finally, look at the applications that you have downloaded. Are there any that you do not use? If so, uninstall them. Note that the system and preloaded apps in general cannot be uninstalled, but you can often remove updates and then disable them in order to free some space.

  Storage on a device Android always tends toward the back of his head and gets the older unit the problem seems to be. If I were a type of plot I would suggest that Google is encouraged to keep buying us new machines every two years... None.