What native video streaming protocol is reliable supported in recent versions of FF on Win/Mac?

Similar Questions

• What is the date of end of support for Firefox version 19?

  I wish to confirm the date of end of support for version 19, February 2013?

  Security updates support ends when the next version of Firefox is released, so while Firefox 20 was released 6 weeks ago and 21 Firefox will be available Tuesday, May 14, that means that Firefox 19 is is no longer officially supported.

  I see that you are still running Firefox 17.

  Is there a special reason why you don't have not updated to the current version?

  The version of Firefox Firefox 17 that you are currently running is no longer compatible with security updates

  Please upgrade to the latest version of Firefox 20.0.x.

  • Help > about Firefox
  • https://support.Mozilla.org/KB/update-Firefox-latest-version
  • https://support.Mozilla.org/KB/updating+Firefox

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• 'No streaming protocols selected' when you try to view a video in Media Player

  original title: I get this error message when you try to watch this video

  I get this error message when you try to watch this video http://sunsite.berkeley.edu/videodir/asx2/d6896.3.asx

  Windows Media Player cannot play the file because there is no selected Streaming Protocol. Select one or several protocols and then try again. So I went to all programs, click Windows Media stream player then automatically allow devices to read my media and I still can't watch this video please help thank you.

  I get this error message when you try to watch this video http://sunsite.berkeley.edu/videodir/asx2/d6896.3.asx

  Windows Media Player cannot play the file because there is no selected Streaming Protocol. Select one or several protocols and then try again. So I went to all programs, click on in Windows Media Player click on stream then automatically allow devices to read my media and I still can't watch this video please help my number is 321-684-8339 my name is Dormina thank you.

  =====================================
  Edit your message and remove your phone
  ... the display of personal information in a public forum is
  not a good idea.

  There is no problem with the video so I think
  You may need a codec that you do not currently
  have installed.

  No guarantee... but maybe it would be interesting to try
  Download and install the following free codec pack:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  Shark007 Win7codecs
  http://www.MajorGeeks.com/Win7codecs_d5959.html
  (the name of the file to download is: "Win7codecs_v376.exe")

• WHY I CANT WATCH VIDEO STREAM

  CANT PLAY VIDEO STREAM IT CONTINUES by SAYING ME Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  Hello

  Welcome to the Microsoft answers site!

  This problem may occur,

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  I suggest you try the following steps:

  Step 1: First, check to see if Windows Media Player streaming video settings is enabled. To do this, follow the steps below:

  (a) open Windows Media Player and click on organize.

  (b) go to options and select the network tab.

  (c) under the network tab, select all the boxes to check and try.

  Step 2: To determine what codec was used with a specific file, play the file in the player, if possible. When the file plays, right click on the file in the library and then click on properties, the file, look at the Audio and video codec codec.
  

  
  Step 3: download and install the Codecs:

  Follow these steps in Windows Media Player:

  (a) click the arrow below the now playing tab, and then click Other Options.

  (b) on the Player tab, select the check box automatically download codecs .

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  (, Read the player always try to download codecs automatically?)

  Step 4: when you open Windows Media Player next, the option plan you will find the stream menu bar. In the menu bar of data flow, please apply the settings you want to the stream and the video game under streaming options.

  If this does not match the type of video file that you are trying to replicate with windows media player default programs.

  You can make the default program using set Associations.

  (a) open default programs by clicking the Start button, click default programs.

  (b) click on associate a type of file or Protocol with a program.

  (c) click on the file type or protocol that you want the program to act as the default value.

  (d) click the program of change.

  (e) click the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs. (If you don't see other programsor your program is not listed, click Browse to find the program that you want to use and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)

  (f) click OK.

  Step 5: Configure the protocol settings To change the Protocol for the player settings

  (a) click the arrow on the reading tab, click More Options, and then click the network tab.

  (b) make the desired changes.

  (c) If you disable the TCP , or if your firewall TCP stream blocks box and the player are configured to use the RTSP protocol, the player will try to receive the streams by using the UDP protocol. If you also clear the UDP check box, or if your firewall blocks broadcasts that use these protocols and the player is configured to use the RTSP protocol, the player will try to receive the streams by using the HTTP protocol.

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-protocols-does-Windows-Media-Player-use-for-streaming

  Now, check if the problem is resolved.

  Please see the link below for your reference:

  http://support.Microsoft.com/kb/911710

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Read the H264 video stream in applicaton of media

  Hello

  I'm using DataSource/SourceStream way, following the article 'How To - audio in support of the application of media'

  I can get only the video stream H264 remote server, without audio stream or rtsp Protocol or any information of container.

  Can I feed this video H264 stream directly to the player? If so, I don't know what type MIME to use the setContentType() function. Be it "video/H264" or other types MIME? I checked "http://www.rfc-editor.org/rfc/rfc3984.txt" and found "this type is only defined for transfer via RTP.

  Appreciate for your help!

  Finally, I got H264 video streams play fine.

  I got my BlackBerry9000 (OS5.0) yesterday and tested H264 video streams can be fed directly to the drive using InputStream. And Ms. type should be "video/mp4".

• Flex, AIR and the video streams remotely

  Lets say I want to connect two AIR applications, running on two computers of different work and video stream directly from one to the other. How could I go about this? Would it not possible to use the NetConnect and NetStream classes?

  Documentation of NetConnect said basically, that if its not connect to FMS, it can connect to a local file or a file on a Web server. However, the same documentation also says that the command of the connect method parameter is of the following form:

  protocol:[//host][:port]/appname[/instanceName]

  so, I wonder what protocols are supported? would be TCP: UDP or: work? (I doubt it because it seems that it requires a file name for access instead of just a port)

  
  Since the support lock frame writes to a file, I thought it might be possible to connect two clients with the help of the Socket classes and then write the incoming stream to a file, which could then be read by NetConnect + NetStream.

  It seems to me terribly backwerds and he brings on another problem on the client sends the stream, if I use NetConnect + Netscream to connect to a file and uses the features of transmission/dissemination, he actually write to this file? And besides, wouldn't be a writer of blocking? Ffrom looking at this part of the framework, I really suspect adobe wants me to use FMS full stop (I mean, how it would be difficult to offer a generic binary stream?) ... which is fair play, but it has no presence for any AIR application that needs to send his our video directly to another customer. You might think, why not 'just' to use FMS, but the thing is:

  Why would a: I? It's 1-to-1 very simple 'power' flow? Why put a server between two clients just for fun?
  B: video could stick as a Bloodsucker a little bandwidth on the server, the bandwidth costs money, internet bandwidth of customer connection are free of charge in most cases.

  All that being said, I don't know much on FMS... He would let a customer enroll in a stream on the server, and then have other clients connect directly to that customer by subscribing to the feed? or steam should go well the server?

  Anyway, any input would be appreciated, the question is really quite simple. Direct video connection between two clients of the AIR... thoughts?

  Hello

  You can use RTMFP and stratus FP10 for this.

  http://labs.Adobe.com/technologies/Stratus/

• KB980408 update kills video streaming.

  After you install this update, WMV9 encoded video streaming is no longer present. The audio is still there, but not video. restored it, video is back, reinstalled, and video is gone. I rolled back a second time, and I see the video.

  W7 on an Acer Aspire 5738pg-6306

  ATI Mobility Radeon HD 4570 with the latest driver/software installed.

  1BadAction,
  This only happens with streaming videos?  What brand\model is your network card?  Have you updated the driver for your network card?  If you have not updated this driver, you must first put to day and then do a test. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Video stream always locks up my computer

  computer crashes after the first minutes of watching an episode of tv or another video stream. Any idea what can cause this? How to solve this? I use Internet Explorer 8 on Windows XP.

  Make sure you have latest adobe flash player (10.1)

  http://www.Adobe.com/support/flashplayer/downloads.html

  S.Sengupta Media Center MVP

• Windows Vista hangs on video streaming.

  This happens quite often and gets worse... because I try to make vidio streaming.  The system hangs and restarts it... but I get no flow of microsoft... even after several incidents last updated reports.   Seems that Vista is more unstable than on time.  Only has been installed before 2 months... I tried unsuccessfully to restore points.  I tried all kinds of microsoft fix it solutions... Still no help. He is a licensed copy of Vista by Microsoft.

  Original Tilte: Vista service pk2 hangs after streaming vidio or media player... even after that I used a microsoft codec Fixer

  Hello

  Please contact the Microsoft Community.

  Please answer the question-

  (1) try you video streams on Internet Explorer?

  (2) what is the exact error message?

  Note: assuming you streaming of videos on Internet Explorer, I would refer the link -

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Do get back to us and let us know. We will be happy to help you.

  Thank you.

• How can I set up a network in the car for the video stream to iPad?

  Hello

  I'm looking to determine the best way to stream video to iPad in the car.

  The children had a mini iPad each with only 16 GB of HD.

  This does not need to store lots of video material.

  So, I'm looking for the best way to allow the video stream in the car.

  I have about 1 TB of films in different formats on a mobile HD and I was wondering what would be the best way to give children access to this material when driving. My car has no other connectivity or any what built-in Wifi.

  There is no need of the Internet, I just they are able

  I've searched the Internet to find solutions, but much to my surprise, there is only a limited amount of info

  Thanks in advance

  There is no way that transmit video for example:

  YouTube, netflix, BBC iPlayer, Hulu more demanding and Internet connection

  If you live in the United Kingdom:

  EE (A Mobile to the United Kingdom network provider) a WiFi car service go to the site

  or you could get the cellular iPads and start a hope of data plan that allows to

• Video streaming has stopped working

  I have a BDP-S370 which was streaming Netflix, Hulu, Amazon, Youtube fine for almost two years, from 3 days, I got the error: connection status cannot be confirmed. Service has not started in this region... my routers very well (my pc and mac have no problem), the player can check for updates. But any time, I try to check the video Streaming or see "Advanced", I get the same error "Région" after the acquisition of content 1/3, 2/3, 3/3.

  I tried to get help from online chat - but they were useless. I'm in Orange, California, and I know that the same question has hit the Ireland and it was due to a failure on end of Sony. The cat online stock exchange would not confirm any event like this (I even sent the link Sony UK) and everything he said was to contact the ISP - with what? He would not provide address IP or UNC of the Sony servers, so what is the ISP that is supposed to do?

  Anyone else had similar issue or have one in California of the South, United States or TimeWarner cable?

  Sorry to hear that it still does not work. I had another thought that is kinda a kill or cure.
  I have read that many people were able to register their player for a better prepared because of Sony fact "Database Maintenance". After that, I saw several people get errors of 'Region '.
  Perhaps there is an incorrectly flag.
  Switch on your player and let it sit on the "home"(et connecté à internet). Menu display "»
  On your computer, go to http://internet.sony.tv and sign in with the same user and password that you used when you activated your reader. You should find your player listed under your account.
  Delete as if you is no longer belonged.
  Wait 15 to 20 minutes to ensure that the database of Sony has updated.
  On your reader navigate to activate enhanced features. It should give you a four digit code again a tell you can return to the web site.
  Register your player and see what happens.

• HP t5740e with Puppy Linux - poor video streaming

  Hi all,

  I got my hands on a brand new t5740e in a trade and felt happy about it. Thought I would install a minimal Linux distribution and use the computer for stuff online on my Benq 24 '' LED screen. I removed W7 integrated and installed Puppy Linux, and while everything works great, video streaming is terrible. Very laggy, glitch, agitated.

  Tried several versions of Puppy Linux. Precise puppy seems to work better, but it is still far from perfect.

  -Flash player is installed, the latest version

  -Video driver Intel is in use

  -Installed FireFox, the latest version

  -For video playback (offline) regular, there is no problem whatsoever

  -When streaming, it works very well in the window, but much worse in mode full-screen. Audio is perfect no matter what happens.

  T5740e hardware specifications should be more than enough to run a minimal distribution like puppy perfectly! I installed it on computers with specifications well below and it works a lot better there, so my question is... What gives? What is happening and why? Can I do something to fix this?

  Marble42, welcome to the forum.

  I think that you will get more responses to your problem if you start a thread here.  The members who know the better your Thin Client.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Webcam won't let me use special effects, said video streamimg can be H.264 or MJPEG. How do I change video streaming

  Webcam won't be me use of said special effects video streaming can be H.264 or MJPEG. How do I change video streaming

  What webcam do you use?
  What software do you use?

  See the respective manual to operate correctly.

• IDS/IPS signatures for monitor audio/video streaming applications

  Hi people,
  Can someone Advisor on the names or signatures that could be used successfully to control the use of streaming on the network applications. The plan must feed to MARS and then create reports on streaming applications use to use it later for the creation of a security policy preventing the theft of bandwidth.

  Perhaps suggestions on how to create a custom signature to monitor the audio and video streams would be appreciated.

  Eugene

  Hello Eugene,

  It is possible to matching strings video specified in your capture by examining the Type of content. Run after the connection with a TCP reset or refuse the inline package will keep the video of the game - which will save bandwidth that the video would have used otherwise. However, it is important that we establish the role of the IPS appliance. The IPS is designed to detect and limit the attacks by matching known traffic patterns. For TCP, this obligation can also include some that drop a bag to disrupt a flow. The IPS is not fundamentally designed to monitor flow and provide a number of bytes for a particular protocol so that the use of protocols analysis can be performed.

  The signature below will drop packets with the flv-application Content-Type, which will keep the video that you have tested on break.com of play. Each video streaming site works differently. A screenshot of each video streaming site will have to be examined and another custom signature written, if you want to block all. Also, keep in mind that many sites offer different options for streaming videos. It may ask you to take multiple shots at each site - one for each method of streaming.

  signature-60001 0
  alert-severity average
  GIS-description
  Flv-application TCP SIG - name string
  output
  engine-tcp chain
  products-event-action alert | Reset tcp-connection
  Regex-string flv-application
  service port 80
  the service management
  output
  alert frequency
  Summary-fire-all mode
  output
  output
  status
  enabled true
  output
  output

  Thank you

  Blayne Dreier

  IDS Cisco TAC team

  * Please check our Podcast *.

  TAC security show: http://www.cisco.com/go/tacsecuritypodcast