Windows 10 bootcamp on external support.

Similar Questions

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• HP F4580 on Imac in bootcamp windows 7, settle "no usb support" works OK on the Mac side

  Trying to install my HP F4580, so I can print from the Windows partition on my iMac. Downloaded and executed the drvier utility but it does not say "Ce PC has no USB support. Considering that the printer works very well on the side of the Mac of the partition.

  Hello

  While installing the printer on Windows using Bootcamp can work, there is no guarantee...

  The OS installed in fact like a virtual envoirnment, which means that your Windows operating system uses your Mac OS USB drivers as the host, and not those intended for Windows windows.

  This is why it is not recognized by the software.

  You can find more information on the document below:

  http://support.HP.com/us-en/document/c00668796

• Cannot install windows via bootcamp (Imac Mid 2011)

  Hi, I struggled for the last 2 days and can't seem to find how to create a windows partition and installed it.

  Note: I have a 27 inch mid 2011 Imac and run MacOS Sierra 10.12.

  I have problems with bootcamp especially at the stage of the process USB drive.

  1. I do not understand why Bootcamp assistant 2 display only tasks being #1 download the windows software and #2 install windows 10 when all apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016http ://

  

  2. I prefer to install windows 7 on my partition, bootcamp, however 'install windows 10', which means that I can't install an older version on my partition? I tried to install windows 7 via a win7 .iso file AND a win10 .iso but none of them works.

  3. whenever I try to install windows, the system do not recognize my USB (it would be with .iso win10 associated drivers or Win7 .iso. + drivers associated) and constantly asking for a disc to be inserted.

  

  My USB has been formatted through disk as MS-DOS (FAT32) volume and all utility used .iso comes from Microsoft. I don't understand why I can't have my. ISO recognized by the system.

  Help please :)

  Damien Kitsune wrote:

  1. I do not understand why Bootcamp assistant appear only the 2 tasks being #1 and #2 install windows 10 download windows software when apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016

  This is normal and expected behavior. Your 2011 Mac does not support the USB Windows installation. You must use a physical DVD burned ISO. Your Mac does not officially support Windows 10. The ISO files are available at https://www.microsoft.com/en-us/software-download/home .

  Documentation on Apple's site shows not all models. Please visit https://help.apple.com/bootcamp/mac/5.0/help/ for an older version (FC5).

• Having trouble install ISO 10 Windows via bootcamp on OSX Yosemite

  Hey, I am currently implementing 10 Windows via bootcamp and I am constantly the error message: "Boot Camp only supports installation of Windows 8 or later on this platform. Please use a file ISO of Windows 8 or later installation. »

  I don't know why I get what I just bought windows 10 hours ago and downloaded the ISO.

  Here is a link to plug my laptop: http://imgur.com/ofClWvT

  And here is the name of the file I downloaded from the Microsoft store: http://imgur.com/ml9HTcl

  This is where the error occurs: http://imgur.com/zPwAbSL

  If someone is able to help or to provide a kind of solution I would really appreciate, if theres more info required please tell me. Thank you!

  If your mac on the list https://support.apple.com/en-us/HT204990

  then maybe you need to update to osx?

• Windows stopped Toshiba Canvio external hard drive because it has reported problems (code 43 error)

  This ext drive works on a notebook of friends (windows 7) and works also on the desktop (windows XP) but work on that notebook (windows xp). I realized problems as recommended by a number of times.  Problem remains.

  Hello

  -What diagnosis made?

  One of the motors controlling the unit does not work.

  First, run the troubleshooting material the Article from Microsoft fixit.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

  Failure to fix, then uninstall and reinstall the device drivers.

  1. Click on Start then RUN and type Devmgmt.msc in the RUN box.
  2. Click disk drives in the list of hardware
  3. Click on the USB external hard drive with the question and click Uninstall.
  4. Once the hard drive is uninstalled, disconnect the USB cable.
  5. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  6. Search the external hard drive in Windows Explorer

  You can view the documentation for the hardware for more information about diagnosing the problem

  For reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

• My laptop Windows XP think my external hard drive is defective.

  My laptop Windows XP think my external hard drive is defective.  It works fine on my desktop PC.  Having the same problem with my USB and my printer all on the same laptop.  All are USB devices that work fine on my desktop PC.  My external mouse and my digital camera are also connected by USB, and they work well on both computers.  Before this week, all the devices worked fine on both computers.  The resolution of the problems of the Device Manager was of no help.  What bad past and how to fix it?

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. what exactly happens when you connect devices to the laptop? You get the error message?
  4. have you tried to connect to USB ports and check?

  Step 1: Plug these devices and then try to run the fix it tool article.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: You can also try the steps outlined in the article below and check out them.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005

  original title: error message

  I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005. How to overcome this please? Thanks for your help. Kay Alexander

  Hello

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

  Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

  How do you partition the disk?

  This is what app or OS that do you?

• How to install Windows 10 on mac not supported

  Hi all

  I have a MacBook Pro 15 inch 2011 lag and I try to install Windows 10. I've tried 3 different methods. I can provide more information if necessary.

  I had running Windows for 10 minutes (2 reboots) until he got stuck on the screen to start due to an unknown error (probably error compatibility)

  I am currently give up and try to install Windows 7 instead, hoping that he'll be fine

  If any of you guys have any suggestions please tell me this is greatly appreciated!

  I am currently give up and try to install Windows 7 instead, hoping that he'll be fine

  I don't think that you can install Windows 7 with Boot Camp on El Capitan:

  • A Microsoft Windows installation media or disc image (ISO) containing a 64-bit version of Microsoft Windows 8 or later *.

  From: How to install Windows using Boot Camp - Apple Support.

  Windows 10 is simply too new for your Mac, and Windows 7 is too old. It is quite a difficult situation. If you really need Windows, you would need to get a copy of Windows 8, or put to level to an earlier version of Mac OS X with a version of Boot Camp that works in Windows 7.

• can not start after the installation of 10 Windows via bootcamp OSX

  Hello, I need help.

  I tried to install 10 Windows via bootcamp, and I did it successfully with no problems. However, after the installation, I restarted my computer, hold down the option key and tried to boot into OS X, but it won't work. It would be a symbol that boot lead me to windows 10!

  all solutions? I do not have a backup of my files under OSX, I lose my files?

  NOTE: when I formatted the partition for windows, he said not bootcamp next to him, but it is clear that the partition that I had to format, it is the same size that I decided to make Windows when I was in bootcamp in OSX + it was empty at 100%.

  UPDATE 1: so I managed to get into the recovery of the internet and deleted the partition that had the windows and install OSX Marverix instead (temporarily) also, I fixed the hard drive MACINTOSH HD, but now I can't boot it at all when I press the option button during the priming of the mac. all solutions?

• Windows with Bootcamp on iMac with only SSD HD?

  I would like to run Windows with Bootcamp on my iMac. Retina iMac late 2014 with no internal hard drive, only the SSD and the 10.11.4. After countless tests, I dropped; I ask the community, is - it possible at all?

  Yes, but your post is so incomplete, you did not provide details of what errors you got. Chances are you have too small a SSD and simply do not have enough space.

  Finally, I ask the moderator to move this thread on the forum of Boot Camp. This is an iMac general forum where most users use only OS X.

• Problems installing Windows 7 BootCamp

  I tried to install Windows 7 on my Mac mini but, I ran into the issue of my screen don't read not once it has restarted to perform the installation. I tried to move to a HDMI screen that seems to work, but the system is not responding to key and mouse input. I can't understand for the life of me what is happening here, for the fans?

  What model Mini?

  What version of Boot Camp Assistant?

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

• Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

  Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

  No. Windows cannot be installed on an external drive, or start from a.

• Connection with Windows 10 (Bootcamp) Bluetooth headset

  I just bought the new iMac (late 2015) and installed 10 Windows using bootcamp.

  Mouse and keyboard work fine on Windows 10, but bluetooth headset gets disconnected, or sound is not clear at all.

  I matched on first 10 and then paired Windows on Mac OS.

  Mac OS works fine but not on Windows 10.

  All solutions?

  Is there a driver Apple BT in Device Manager?