What possible processor on P5LP - THE?

Similar Questions

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• What happens if I disable the processor in Device Manager

  I see 2 processors in Device Manager. What happens if I disable the processor in Device Manager

  Hello

  Since you say that it works perfectly in safe mode, I think that there is a problem with a driver or an application causing this boot loop.
  Please see this thread with details exactly what a clean boot is and how to use it to solve the problems of this kind. The idea behind a clean boot is to identify the exact cause of the problem so that we can fix or remove the troubled application.
  http://support.Microsoft.com/kb/331796

• What is the other possible way to reset the new hash in 12 c value

  What is the other possible way to reset the new hash value in 12 c (edit user < username > identified by the values < "Hash" >;  ?

  Thank you

  Suman

  Thanks for all the help.

  Problem has been resolved. There was little extra space (undesirable character in file) which has been provided by the user. Monday, I created a test user and manually run reset password and has worked well:

  SQL > select banner version of v$.

  BANNER

  --------------------------------------------------------------------------------

  Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production

  PL/SQL Release 12.1.0.2.0 - Production

  CORE Production 12.1.0.2.0

  AMT for Linux: Version 12.1.0.2.0 - Production

  NLSRTL Version 12.1.0.2.0 - Production

  SQL > alter the test user identified by test2;

  Modified user.

  SQL > select name, password of the user$ where name = 'TEST ';

  NAME PASSWORD

  ---------- --------------------

  TEST A43C4E7D0745AB7D

  SQL > alter user identified by the values "A43C4E7D0745AB7D" test

  Modified user.

  My apologies without testing on my side I asked a question here.

  Thank you.

  Suman

• I want to install the English version of PhotoShop (CC), a Finnish step. Is it possible under Windows 10 Finnish version? If its is, what do I do? The installation procedure gives no possibility to choose the language version. Why?

  I want to install the English version of PhotoShop (CC), a Finnish step. Is it possible under Windows 10 Finnish version? If its is, what do I do? The installation procedure gives no possibility to choose the language version. Why?

  Hi Matti,

  If your don't see preferences then may not be connected on the creative application of cloud, please check and confirm if you see a window for you to connect on the app if yes go ahead and this after click applications once it loads after that, click the gear icon and select Preferences.

  Kind regards

  Bani

• I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this.

  I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this

  Assuming that you are talking about disk space from in the guest OS. You are probably using an MBR partition table, which limits the maximum usable disk space to ~ 2 TB. In order to use the entire disk space, you need a GPT partition table.

  André

• Upgrading the BIOS. Mobo ASUS P5LP - THE. BIOS of PHX. Tech. of ver.3.16. Pavilion a1620n. Win 7OS.

  I have a Hp Pavilion a1620n with a motherboard ASUS P5LP - THE using Phoenix Technologies Bios VER.3.16 and running Windows 7. I want to upgrade the processor and said that I have to upgrade the Bios before upgrading the processor. I have been researching but can't find any info on how to do it for this particular machine. There is no on-board Bios Flash program and I can't seem to find any information. Any ideas?

  AZ_scuba_dude, welcome to the forum.

  There is no update software/BIOS for Win7 for the computer.  It is unlikely that there will be a developed.  However, there is a BIOS update for XP.  You will need to do a system restore to the original configuration that includes XP.  Once this operation is complete, you can update the BIOS to version: 3.19.  You can do the update using the executable file (sp35100.exe). Although she did not mention anything about what makes the upgrade of the processor.  Here are the Specifications of the motherboard of the computer.  In the processor upgrade information section, it lists the updates that supports HP.

  Please let us know if this solved your problem or not.

• What motherboards are compatible with the s1400-103?

  What motherboards are usable in the S1400-103, laptop PS140E-03CT 0 - EN? The center pin for the power supply DC to pronounce on mine. Toshiba said that the repair is not possible and so could charge me £370 for a new.

  Hi ian

  I was not being able to find an exactly number description or a part, but you can it search the net or even try to get the info of service partner.

  By the way: do you really want to exchange one?

• It is possible to boot on the usb port?

  Hi all

  I would like to know if it is possible to boot on the usb port? I have this message "NTDRL is missing" at the start, I guess I have to reinstall Windows on the machine?

  Furthermore, I would also like to sell my laptop (configuration: 1, 00 G/2 X 256 PM / 40 G/12XT/LM/W). How could I wait fot his laptop? Where can I sell it (it's so hard to sell such a laptop).

  Thank you very much for all your answers...

  Hello

  When you get this message it means that the file Command.com has not been found. Or because he is missing from the boot drive, or your startup drive does not work. The file could also be destroyed because of a mistake. Command.com is used on versions of Windows that load on the BACK as Windows 3.0, 95, 98 and me. Command.com is not used on NT, 2000, XP. They use the NTDRL file to load. The BIOS reads the start section of the reader to know what file to load. If the system is on the NT platform and you get this error, then the boot sector is damaged or the hard disk is damage.

  Well, you write t n what kind of phone it is. How will I know that means this unit cost? I put t know this model.

  Nevertheless, you should check the prices on Ebay.

  Good bye

• Upgrade processor selected in the recommended list of HP does not work

  Have a HP Pavilion P6733W.  We bought an AMD Phenom II X 4 965 Black Edition 3.4 GHz processor, to replace the OEM processor.  However, after installing the new CPU, the PC starts up.  It runs for a few seconds and then stop.  I think the HP web page has led us astray.  The X 4 processor 965 has a 125W TDP and the specification of the mobo is apparently scheduled for the TDP 95W max.  So, even though HP has said that it is a taken upgrade option supported, I think that the TDP is perhaps the reason why it is not initialize.  What is the likely problem?  If not, what else could be?

  Here is a copy - paste of the HP web page for this model desktop computer:

  Processor upgrade information

  The information displayed for your desktop HP Pavilion p6733w and it's N-Alvorix-RS880-formfat (Alvorix) motherboard is correct. It should be read "AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (core Deneb) up to 95 watt TDP. If the CPU that you have installed is estimated at 125 watts, it is not listed as compatible. Also note that "Black Edition" CPU has unlocked clock multiplier and is designed for overclocking. Your computer and his mother do not support overclocking.

  Please consider these 95 watt AMD AM3 processors except CPU "B #

  Please send Bravo

• What load balancing algorithm using the LRT224?

  I was wondering if anyone knew what algorithm of load balancing the LRT224 use since I can't find it anywhere and the telephone support line does not.  It is very similar to the RV320 of Cisco that uses Weighted Round Robin, but I don't think that the Linksys uses this algorithm because it includes speeds of bandwidth unlike the cisco that does not work.  and if anyone can also check that this unit doesn't package base rather than load balanced session load balancing.  as much information as possible would be appreciated!

  The standard of the LRT load balancing is alternated:

  Example:

  1 TCP connection to website-online WAN1

  2 TCP connection to website2.com-online WAN2

  3 TCP connection to website2.com-online WAN1

  4 TCP connection to website1.com-online WAN2

  If you enable the feature (recommended) sticky load balancing load balancing is done on a base per session instead of the base of the connection.

  Example:

  1 TCP connection to website-online WAN1

  2 TCP connection to website2.com-online WAN2

  3 TCP connection to website2.com-online WAN2

  4 TCP connection to website1.com-online WAN1

• Is it possible to shut down the computer after the call to a draw on Chess Titans?

  Is it possible to shut down the computer after the call to a draw on Chess Titans? It does this to me almost everytime I have the King stuck, but when my King is stuck, I lose each time. WTH?

  original title: circulation of Chess Titans

  If its your turn and you can make any legal move either with any piece, but your King is not in check, it is then deadlock. Deadlock is considered a match draw in standard chess rules. For examples, see:

  http://en.wikipedia.org/wiki/Stalemate .

  If your King is in check and you can immediately do a legal process to get out then check it's checkmate. For the person who the King is in check, this counts as a loss. For examples, see:

  http://en.wikipedia.org/wiki/Checkmate .

  In the two scenarios above, can even vice versa (it may apply to your opponent too).

  If the above explains what you see in Chess Titans then the program is correctly following standard rules and it is not a bug in the program. If she does not explain what you see then please explain more precisely the scenario.

• What do you do when the Sp1 will install not completely (error 8024200d)

  original title: what do you do when the Sp1 does not completely settle

  How do you get around the Windows Update_8024200D error code?, I made another attempt to install sp1 because they support us again until the 7-11. I use a high quality pc with windows vista premium operating sys., my pc is an Intel Celeron D 352 (3.2 Ghz) processor. ....... At & t / yahoo is my service provider and I got the pc to frys electronics and they have very little support and technical support, the pc was a promo and it not come with any software, except an installation cd of motherboard for the upgrade, the operating system has been pre-loaded, I have also some backup cd of those years I've had the pc I don't know whether or not they will be useful, but they go beyond 2010, I've stopped doing backup disk because I don't think I needed one every 3 mos. Is anyway I can get the software little or no cost to fix this?... I also added more ram and I so a concert instead of 80 GB, what options should I? Please help if you can that turns into a nightmare!... I don't use anti-virus software and Microsoft security essentials is the only security I use, I do a maintenance when necessary

  leilani reynolds,

  See if this KB helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366>

  06/06 / 1101:01: 48 pm

• That makes the option the Minimum processor state in the box options advanced a power Plan?

  Original title: the Minimum processor state

  What does the 'State of the Minimum processor' option in the Advanced Options of a power Plan area? If I put it at 50%, this means that Windows will feed the processor of the unnecessary calculations just to keep 50% of its capacity? If so, why would it be of any use? If this isn't the case, then what is its role?

  Thanks for any clarification,

  Rifdhan

  Hi Rifdhan,

  The main reason you would set your option of the processor State Minimum to superior to the minimum (e.g. 50%) is if you run CPU intensive programs very and they would not work well at lower States of CPU.
  Processors do not require a constant stream of information to operate at a certain speed. For example, if you have a 2.0 ghz processor and you set the State of minimum CPU at 50%, the lowest ever, it will fall to East 1.0 ghz, even at idle.
  With your minimum fixed at 50% and maximum set to 100%, the real speed it works rest between these two values and the current amount of life battery will be factor in how quickly he chooses to run an average of 75%.
  If you set your minimum to 5% and up to 100%, it will go down very low to preserve the life of the battery.
  Hope this helps to understand how it works and I hope someone else can help to further clarify.

• Is it possible to listen to the exit app event in webworks?

  Dear all,

  Is it possible to listen to the exit app event in webworks?

  What I would do is:

  Displays a warning message (told that notification feature will be disabled) to the user when they attempt to close the application.

  I saw resume, pause events in the document here: https://developer.blackberry.com/html5/apis/v2_0/blackberry.app.html

  And look for exit the event on playbook, bbos: blackberry. app.event. onExit )

  But found no output Earphone for BB10.

  Could you please provide any valuable resource or information about it?

  Thanks for the help.

  Unfortunately the platform as a whole does not have to "suspend" the process of application endpoints. Even if we hung out at the event, the web runtime is being demolished before that you could do something meaningful.

  Sorry I don't have better news.