What processor chips suitable for the improvement of a Presario V5000

Similar Questions

• What type of certificates are not suitable for the signature of the extensions to HTML5?

  It is not clear to me, of the literature exactly what types of certificate are not suitable for the signature of the CC2014 HTML5 extensions.

  I used a Thawte 'Adobe Air' certificate for signing extensions based on Flash. It is now expired. Can I buy the same type and that will work cross-platform for the signature of the extensions to HTML5?

  See http://www.thawte.com/code-signing/content-signing-certificates/adobe-air/index.html

  Thank you

  Hi meeky2,

  Required certificates have not changed for HTML5 extensions, so the same type of certificate that you had before work ('Adobe Air' certificates are very good).

  Note that if you only distribute your HTML5 extension through modules Adobe / Adobe Exchange, then there is no need to use a paid certificate. If you distribute your extension elsewhere, then you should do the same thing as you did with the extensions of the AIR.

  Best regards

  Fraser

• What processors are compatible with the HP G62-b09SA notebook PC.

  What processors are compatible with the HP G62-b09SA notebook PC. Also I'm under 64-bit Windows, but on the HP website, it indicates that the maximum amount of memory is 4 GB, why?

  Hello

  Here is the link to the service manual for your laptop

  http://h10032.www1.HP.com/CTG/manual/c02542102.PD

  See page 1 for a list of supported and also taken processors on this page under the heading memory, it is said that the laptop can support up to 8 GB of memory.

  Paul

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  Hi, Jason.

  the only way to fix this is to talk to xbox support, if they suggest you to do something you have already been told and they will suggest something else.

  phone numbers:

  * In the United States, to the Canada or Puerto Rico: 1-800-469-9269 or 1-800-4MY-XBOX

  See also this forum account issues:

  forums.Xbox.com/.../12.aspx

  Have you tried using another browser?  Google Chrome, Firefox?

  Contact for chat

  http://support.Xbox.com/en-us/contact-us?XR=footnav

• There is a special offer for the improvement of the CS6 CC?

  There is a special offer for the improvement of the CS6 CC?

  Used to be, but it expired months ago.

  Now you simply subscribe to the plan that you want for the price advertised.

• What plans are available for the use of the storage cloud at adobe. What is the authorized space if I free plan.

  What plans are available for the use of the storage cloud at adobe. What is the authorized space if I free plan.

  Thank you

  Agoutin

  Hi rajthkr,

  Acrobat.com offers free online storage for up to 5 GB of data (there are on the plans at this time to provide additional storage for a fee).

  Best,

  Sara

• What is upper & lowercase for the password

  What is upper & lowercase for a password I'm having a problem trying to create pasword

  Top case also known as "capital" are: A, B, C, D, E...

  Are tiny: a, b, c and d, e...

  Some passwords are case-sensitive. This means that, for example, typing the letter B is not the same thing as typing the letter b and will result in your password being rejected if you type one wrong.

• Should what software I expect for the security system?

  Hello

  I was wondering what would be the best for the security of the system. When certain programs are installed/uninstalled, they leave some files behind them in the registry. Please, tell me what would be the best for computer to run smoothly and fix it?

  Thank you

  You are welcome. Surf safely and have a day free of malware.

• What stick memory type for the CP1525nw

  I have a CP1525nw and you want to install the upgrade memory.  I've been through many documentation page but can not find anywhere what kind of SO-DIMM 256 (DDR1 DDR2 and how fast.).  Thanks in advance, youth

  Hello youth,

  The memory of the printer for this printer is HP 256 MB DDR2 144-pin DIMM CB423A. See the link below for the memory of the printer.

  Series of HP LaserJet Pro CP1525 Color printer - accessories, supplies & services

• Input string Microsoft Fix It wasn't in a format suitable for the printer repair

  I have download Microsoft Fix It and when he goes to check the printer indicates the input string was not in a correct format, alos get an out of memory message when you try to print.

  Hello

  1 could you give the exact and complete error message?
  2. What is the number of brand and model of your printer?
  3. from what link you are running the fix it?
  4. of what program/application you want to print?

  Method 1.
  We start by execution of troubleshooting of the printer and check if it finds problems. Refer to the article below for the procedure.
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2.
  Also, try the methods listed in the article below, in particular under sectionto restart the print spooler service.
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What size and resolution for the web

  Don't know what size and resolution I should I save my photos to FB.  Any suggestions?  AND I can do LR or what I have to go to the PS

  Thank you

  Alisa

  The resolution setting has no effect on the image. No matter what the resolution is fixed to, the pixel dimensions will remain the same. When I post photos on Facebook, I usually export copies with size defined for the long edge of 1000 pixels. Maybe it's a little too big. But you can set the resolution to 72, 96, 300, 600, etc., and it will affect the size or quality of the image.

  And, Yes, you can use Lightroom to export copies to publish on Facebook. In fact, if you set up your publication options, you can post to Facebook directly from Lightroom and not even had to worry about the size.

• A proposal for the improvement of "Correct camera distortion."

  The smoothing tool is very simple - you simply draw a line following the horizon and straightens the image. It would be nice if you could do the same along a vertical line, but you can always rotate the image 90 degrees first.

  But when the distortion of the camera for tilt and rotation correction, it is much heavier. It takes a while to get all the verticals vertical. Now if he could just mark two lines that should be vertical, the program could easily make the adjustment automatically.

  Of course, this isn't really a question to the community. I hope that Adobe people read and answer this question, but I can't find a way to communicate directly with the developers.

  What version of photoshop elements and the operating system are you using?

  I just installed version 13 and tried to update to 13.1 failed. I use Windows 8.1.
  

  You can make a vertical smoothing with the tool right in the PES Editor

  To align vertically, click the starting point, hold down the CTRL (command on Mac) and drag to represent the new straight vertical line.

  https://helpx.Adobe.com/Photoshop-elements/using/cropping.html

  Nice. I didn't know that.

  Here's the undocumented keyboard shortcuts good camera distortion in photoshop elements

  In the correct camera distortion dialog box, you can display a grid and move the grid by pressing the M key and dragging on the grid

  I knew that.

  You can get the straighten tool by pressing A and then you either draw a vertical or horizontal line to straighten

  Good.

  You can press the D key to obtain the remove distortion tool and drag on the image

  (even by moving the slider of distortion delete)

  But you have not addressed the point I was making. In most of my photos, I need to set the angle and the vertical distortion for the vertical lines to be vertical. And I want them to be precisely vertical. This involves a lot of steps in fine tuning. As I said, if I scored just two lines that need to be vertical, with a simple geometry program could perform this operation automatically.

• What is best practices for the mirroring of a vector design (symmetrical)?

  say OK, I'm a user icon detailed (head and shoulders people) for some icons, etc. which need to scale graphics General icons for web and print.

  I can create the silhouette easily by tracing around my sketch in pencil or making it up on the spot. now, I wonder as I used maya (3d) in the past and I could work on one side, while the otherside (x) is created as a pseudo copy until I get an independent form. Is it possible to do this kind of thing in illustrator CS4? What you guys need to do something like that is completely symmetrical? (I'm still stuck on this when in a hurry)... could you explain step by step?

  Thanks for the tips!

  You can do this with a transformative effect, updated to reflect, 1 copy.

  

  In the appearance Panel, select the path and save a style that can be applied to the new paths that you draw.

• Tecra M5 (PTM51E) - What tools I need for the FN keys?

  I am trying to install a new version of Windows XP on my laptop.

  Can anyone confirm which software from the support site, I need to install to get the Fn + F keys to work?
  I installed everything on the site but I can't get the buttons working.

  Screen brightness works but buttons to switch between WLan, WLan + Bluetooth etc do not work.

  Thank you for any assistance.

  Hello

  You can answer this question yourself as on the Toshiba site, you can find the installation instructions document. Use this list as an installation order recommended to work properly for laptop.

  In any case, for the FN keys, you need:
  -Common modules
  -Controls
  -Utility Hotkey for display devices
  -Utilities

  Good bye