A proposal for the improvement of "Correct camera distortion."

Similar Questions

• How to keep the metadata after Correct camera distortion filter?

  Hello

  Anyone know how to keep the metadata information after you have used the Correct camera distortion filter?

  In other words:

  When I need to correct the photo with good camera distortion to the menu Filter option I can't keep the metadata to the final table.

  After correction, I cut the useful part with the rectangular selection tool, and then I chose the file, new, Image to the Clipboard.

  Either the format file that I choose to save the metadata information has disappeared.

  I tried to export the metadata from File, FileInfo, information, and then import the metadata (XMP file) but no result.

  Someone at - it an idea to solve this issue

  Thank you

  This is probably because your using the Clipboard that discards the data.

  Try to crop your photo and recording. You can always cancel the harvest after saving if you want to do something in the photo.

• The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  Hi Sarma_RN,

  1. When you receive the error message?

  2. update you are trying to install?

  3. When was the last time you were able to install updates?

  If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  See the Microsoft article and try the steps mentioned below.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  If it's a camera for INTEL it website should have the good

  64-bit to Win 7 64 bit software.

  Some older hardware will not work on newer 64-bit systems.

  check your websites of manufacturers of games for win7 64 bit compatibility.

  Try your game in compatibility mode in Windows 7.

  to say the least there are a huge amount of games and

  software that works fine with Win7 64-bit.

• There is a special offer for the improvement of the CS6 CC?

  There is a special offer for the improvement of the CS6 CC?

  Used to be, but it expired months ago.

  Now you simply subscribe to the plan that you want for the price advertised.

• why I can not activate correct camera distortion filter

  I have a picture to grayscale 8 bits with pin cushion distorion. I unlocked the layer by double clicking on the background layer to create a new layer 0. The filter «Good camera Distorion...» "is always grey. The help file is useless in showing how to solve this problem. What should I do to get this filter works?

  For me, the "correct camera distortion" works without any problem, even in grayscale, in 16-bit mode and with a normal background.

  Could you try to convert it to RGB 8-bit mode and see if that helps?

• What processor chips suitable for the improvement of a Presario V5000

  I have a Presario V5000 that I do updates on. I've increased the RAM to 2 GB, and I think to put in a faster processor. He got a 1.8 GHz AMD Turion 64 ML-32 in it, and I think to pick up a version 2.2 GHz the stalk. It seems that this chip can be had for about $50, but I have a few questions I could not find the answers to.

  1. the service V5000 guide lists the numbers of two HP for the Mobile Turion 64 ML-40 (430499-001 393579-001), but it does not explain what the difference is between the two. I googled the two part numbers, but I was not able to know what is the difference between the two, as appropriate. I also turned a number of part of AMD (TMDML40BKX5LD) for the ML-40, but I don't know if all ML-40 with this part number will work correctly in the V5000 or if it should be a part of HP.

  2. the increase in performance to the faster processor may be quite sensitive to value money, or should I just leave well enough alone?

  It is not likely to be very visible and will not turn the laptop in a modern machine, but will give some improvement. My threshold is 10% and this is a jump of 20 percent in clock speed. All the ML-40 should be the same. Why HP has two numbers, I don't know. It is not an HP processor special is an AMD and a 40 ML of another brand of laptop should work. The V5000 is relatively easy to open up... thicker than current models and more room in there for a processor swap is not too difficult, because things happen.

• file extension for the monitor color correction

  I'm trying to manage the colors on my screen.  I understand that somewhere in XP there is a set of specifications for the color corrections.  No one knows what it is and how to manipulate.  It is important to show some images simulated for vision.

  You must use the color for this Management API.

  All functional you need located in icm32.dll.

  Use following links to get started:

  Introduction to OS Microsoft Windows color management

  Color management functions

  It will be useful,

  Andrey.

• Special proposal for the creative cloud for students

  Special proposal for working creative cloud for the Ukraine and students of correspondence courses?

  mobilelord wrote:

  OK and how many PCs can I activate to use this plan?

  Maximum of two at a time.

  As soon as I finished the Academy, the education plan will be cancelled?

  No, Adobe does not follow your academic progress.

  Once you have verified as being eligible for the student and teacher version, your contract begins.

  Your contract up to 12 months later. Anytime your degree (finishing Academy).

• Installation manual for the cinema MS Life cam

  1. I have Windows XP with Service Pack 3 - does that answer the demands of life Cam movies?

  2. my CD player does not work - download the installation manual to read and install my webcam?

  Thank you.

  Yes.

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-cinema#support

• Cannot run the fix for the improvement of the IOM to IOM 11.1.2.0.1

  Hi Experts,
  
  I'm upgrading to IOM for the new patch 11.1.2.0.0, in the guide that the step is given as
  
  

  Set the ORACLE_HOME directory in your system. For example:

  setenv ORACLE_HOME/opt/oracle/mwhome/Oracle_IDM1
  Apply the hotfix for the ORACLE_HOME bundle by using the following command:
  opatch apply

  I do the above given steps, but I'm not able to run the fix it givens me error
  
  

  bash: opatch: command not found

  Help, please!

  You must add OPatch to the PATH variable before running the command opatch.

  OPatch folder is home of the IOM.

• Suggesting ideas for the improvement of Windows. How?

  What is the best way to communicate ideas for improvement of Windows now that * address email is removed from the privacy * no longer works?

  I sent them through aid and support Feedback...

  You can post your comments here: http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  [cf.  http://social.answers.microsoft.com/Forums/en-US/w7desktop/thread/b9a9c9bf-87b4-4350-824e-99921e22410e/]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Is this declaration for the creation of correct active standby pair?

  Hi, I have two servers, one is "baal" and the other is "diablo".
  I want to create a pair of active standby with the RETURN of TWOSAFE and disable the BACK after that 5 times timeout happens and resume BACK if less than 8 ms recognize.
  I do not sure if 8 ms is reasonable if the starting node is far behind the active node (assuming the starting node is to hardware failure).
  Here's my response:
  --------------------------------
  PAIR of EVE ACTIVE CREATE eppdb WE "baal", eppdb ON "diablo."
  RETURN TWOSAFE
  STORE eppdb WE 'baal '.
  DISABLE THE BACK EVERY 5
  CURRICULUM VITAE OF RETURN 8;
  -------------------------------
  Is what I'm not clear on the key word "STORE."
  I noticed that there are a lot of 'STORE' after RETURN of TWOSAFE and make that confused me for a while.
  If this assertion is false, please correct me.
  
  Thank you.

  In fact, these options apply to the store level so that the statement is as follows:

  CREATE A PAIR OF ACTIVE STANDBY
  eppdb WE 'baal', eppdb ON TWOSAFE of RETURN "diablo."
  STORE eppdb WE 'baal '.
  DISABLE THE RETURN ALL 5 HP BACK 20
  RETURN SERVICES TURNED OFF WHEN THEY ARE ARRESTED
  SUSTAINABLE COMMITMENT ON
  COMMIT LOCAL ACTION VALIDATION
  WAIT BACK 30 TIMES
  STORE eppdb ON "diablo."
  DISABLE THE RETURN ALL 5 HP BACK 20
  RETURN SERVICES TURNED OFF WHEN THEY ARE ARRESTED
  SUSTAINABLE COMMITMENT ON
  COMMIT LOCAL ACTION VALIDATION
  WAIT BACK 30 TIMES;

  All these options and what they mean are described in detail in the (very good) documentation. I would recommend that you read in order to understand that you configure here... Just a summary.

  Whenever the wait isn't available, application commits will experience timeouts (TT WARNING 8170). Request code must be prepared to receive and respond to this warning. Finally (according to the options DISABLE RETURN and RETURN WAIT [see below]) TT come back asynchronously and wait times stops. Once sleep is available and the stores are back in sync TT will increase from TWOSAFE BACK mode once again.

  DISABLE BACK every 5 - turn off the twosafe return (i.e. emergency in asynchronous mode) treatment after 5 consecutive times (each timeout will be 30 seconds)

  BACK to the TIME of WAITING 30 - wait up to 30 seconds (a very long time) for recognition in return for service to the peer

  The combination of these two parameters means that in the event of network failure or the eve past active offline will be waiting for about 150 seconds (5 x 3) before disabling the twosafe return processing. During this time of transaction request will be and experience timeouts. I would suggest smaller values such as 2 and 10 maybe but only t = OU can decide what is reasonable for your environment.

  SUSTAINABLE if ENGAGING ON - whenever the return services are then disabled, force all commits to be sustainable (synchronous disk). This will degrade performance, but provides continuous data protection when the instance of relief is not available. If you don't want this feature so do not configure (but then when the watch is not available you are exposed to data loss if the assets fails).

  RETURN SERVICES OFF when THEY are ARRESTED - disable services return (spend in asynchronous mode) each time the replication agent stops.

  LOCAL validation ACTION COMMIT - if a validation Gets a time-out warning (TT8170) then the transaction status is uncertain. The application can choose to engage locally (allowing it to continue the treatment), in which case the txn is committed. will be added to the queue of replication for a (possible) retransmission in asynchronous mode. It is the recommended behavior and is defined by this option. The other option is NO ACTION, which is also the default value. With this option, the application must implement the logic for its own decision, and then call a few specific TT builtin functions to decide how to deal with the uncertain state. This adds significant complexity. Until the application makes a decision, it is impossible to continue.

  See the documentation for more information.

• The Sierra of MacOS will propose for the Mid 2009 MacBook Pro in the near future?

  I have a model Mid 2009 MacBook Pro and when I try to upgrade the software of OS systems to the Sierra, he refused my request to download because it "cannot be downloaded to this computer." I noticed other Mac computers, for example, iMac Mid 2009 or newer and MacBook Mid 2009 or more recent systems only one are close to mine are candidates to download the software, but the MacBook Pro is the only one that is not on this list for availability. So, my question to my question is, will be available Mid 2009 MacBook Pro updated to day for Sierra anytime soon? And if not, why?

  Please let me know what your answer is as soon as possible.

  Thank you!

  My answer is no.

  However, as long as I and everyone here, do not work for Apple, my answer is certainly not authoritative.

  However, as I've used Apple computers for more than 30 years, he never had a case when they released an additional OS that works on previously excluded material.

• support for the improvement of a dc7800 sff with a QC 8400

  Hello

  I bought my HP DC7800 desktop from a broker who got a point on HP desktop computers get a bankruptcy in 09. Now I got a copy of Vista Business x 64 and 4 GB of ram DDR2 of Z OC-)

  Hello AnthonyK, I did a little more research and found this interesting information.

  It seems the E6750, the E8300 and E8400 CPU both have a thermal basis of 65 watts TDP.

  In other words, that they are built on the same core process, with speeds just different.

  Intel seems to have been able to reduce the thermal power of these processors with the 45nm.

  Your current E6750 has a current draw slowed 123 watts total system power consumption and a current draw stressed 163 Watts.

  The E8300 has a current slowed to 128 watts system appeal total current consumption and a current stressed 158 Watts.

  The E8400 has a current appeal slowed 131 watts total system power consumption and a current draw stressed 158 Watts.

  What are the limits of your current processor.

  I don't think that an improved power would be necessary. These processors, since they will perform at higher speeds, can create a little more heat, but if you clean the system completely when you change the CPU, you should be fine.

  Sometimes a BIOS update is required when the processor is upgraded. Here is the link where the BIOS can be found if your system requires a. You can first check the BIOS and see if there is a newer version available.

  Just some thoughts.