What service you want to pounce?
Hi all
EBS 12.1.3
oul5x64
When you change $ORA_CONFIG_HOME/10.1.2/reports/conf/rwbuilder_conf
I don't want to bounce the webTier together to help
$adopmnctl.sh stopall/startall
Please indicate which service should I bounce before this change takes effect?
HTTP or OA CORE?
It's production, so I just need to bounce back if I have to.
Thanks in advance,
Kind regards
It is in this case OACORE.
Thank you
Hussein
Tags: Oracle Applications
Similar Questions
-
After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it. At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.
What can I do to fix this?
It's a site file
Hi Jose7777777,
- What version of Windows are you using?
- How long have you been faced with this problem?
- Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
You can also view the startup folder.
I hope this helps.
-
Download request "what file you want to open with.
I had a software auto update this morning.
Since then, if I try to download something, he asks "what file you want to open with?" He has never done this before.
I tried to download Skype and Firefox, since he has stopped working after the automatic update (mailed separate issue only)
Hi Matthew,
Try it please reply Ramesh here for a possible solution.
-
Get the prompt: what program you want to open it with? When to open the web browser
When I try to open my browser (or any other program), he asks 'what program you want to open with' and gives me a list. What is with that? I have just got rid of "xp security 2012" if it means something... or am I...?
Hi Leoboutilieri,
have been closely following this:Otherwise, carefully followLet me know if it helpsElvis -
When I open the Explorer search in windows XP, the dog still works without the option "what do you want to search for" and other options. How can I solve this problem?
* original title - search for windows problem images *.
Hi true-do,.-Remember you proceed with recent computer between the calendar changes when things worked fine and now?This problem may occur if one or more of the Jscript registry key settings are incorrect. This problem can also occur if the Jscript.dll file is missing or damaged. -
When you open a program, such as the system restore or turbo tax it always ask what program you want to open this program with a list of options such as the Adobe reader, internet explorer, yahoo Messenger, etc..
is there any solution for this?
Hello
The issue seems to be with the file association so corrupt that I suggest you run the fix it or follow the manual procedure provided in the link below to fix the problem.
-
What is "you want to update the password saved for"
Given that I deleted prefs.js and user.js when I connect to any account in the upper-left appears
"you want to update the password saved for" this interferes with the connection and now it won't let me connect you to your e-mail account.
I wonder where it appears? I don't want to use it and want better to delete, but don't know how?
I wanted to add a page in this issue, but as usual Firefox won't like that I guess. So, after this announcement I'll add.Thank you.
Hello
Thanks for the very useful reply.
I followed the direction and it seems to work. -
What type of service you want to use for the Proxy Service
I have a question about a service Proxy.
I need a local (local transport) the Proxy service which is called by another proxy service.
It is a synchronous service that has an incoming message XML and an outgoing XML message.
I have the following questions:
-Does make a difference in performance when I choose a webservice WSDL or a courier service?
-Which would you choose and why?
ThanxDoes make a difference in performance when I choose a webservice WSDL or a courier service?
There would be little difference.
Which would you choose and why?
I would choose XML type type e-mail proxy because the input and output XML messages. I choose WSDL web service because it should be used in the case of SOAP packagaing only (in the context of web service, to enable SOAP and WS support) to make fun of a web service that has a WSDL (and an XSD) that is associated with.
Kind regards
Anuj -
Hello
I'm stumped on this one. Whenever you launch any program on the start menu, the command open, run box, the "program would you like to open (progrem.exe) with? appears, example by clicking the shortcut of internet Explorer, invites "which program you would like to open iexplore.exe with? It looks like a file association error but cannot find a list.
HelpHello midryder
Go here
12 straight line
Save the REG file to your hard drive. Double click it and answer Yes to the import prompt.
.
-
We want to give you what you want
What items of specific topics / you want to know more on our online training team and what format you want it to be delivered? (Examples: Web demo, recorded training session, bridge of PowerPoint, video training)
1. how to solve the network connections at home (file sharing problems, search for computers on the network, share printers, etc..)
2. reformatting readers/clean installation of OS in a new SSD.
3 overclocking via BIOS (1333 mhz-online 1866 mhz) memory
4. keep bloatware lean system.
5. how to configure the automatic data backup using the dedicated external HARD disk.
6 PC owner maintenance (cleaning of the dust/debris, upgrading memory, ports installation SSD, maybe add thermal paste, etc.).
7. how to catch up with the latest drivers (video drivers, TSRI firmwares, SSD/HDD, chipset, etc.)
All training materials must be in video format w / downloadable instructions. Make downloadable video as well for easy reference.
-
BUG: Stop asking me what program I want to use it to open images in Windows 10
Yes, there is another thread on this, but it has an accepted answer that does not solve the problem.
In Windows 10 whenever you click on an image in Skype, you get an annoying screen asking what program you want to open it with. I have put my flaws so stop show and simply open the image.
No, this isn't my file associations are not set up. I got them, I can double click on the images in the file Explorer and they just open, other programs can do that too.
I even wrote a simple c# program
Process.Start(@"IMG_03112015_100918.png");
who has managed to open the image upwards with my associations - prove that Yes, you can do it programmatically.
Windows changed how some API worked? Obviously. But you can bypass. It's something that should be fixed before Win10 went live. The fact that months later it is still a problem reflects really badly on Skype.
Yes you did! Skype 7.14 works as it was intended!
-
Do you want to install the program on the Satellite A500 - need to log on as an administrator
Just bought A500. Logged in as an administrator. Try to install a program on CD.
The system indicates that I need to log on as an administrator.How can I fix this problem?
Is your new Satellite preinstalled with original Win7 or you use clean install of the OS?
What program you want to install?Sorry for the question but it is somewhat strange.
-
I get the message asking me what program I want to use to open the program
When I'm online and I try to change the programs, such as clicking 'send' or any change of clock, I will get a window with about 6 choices that says: "what program you want to use to open this program" no matter which one I try, I got nowhere. This all started 4 months ago. How can I get rid of this nuisance.
Thanks, Dan
Hello
(1) do you have made no changes before this problem?
(2) what operating system do you use?
Method 1:
Step 1: I suggest you perform a clean boot before run us the fix it.
Clean boot
How to set up Windows 7 to start in a "clean boot" State
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Step 2: Cannot open. EXE in Windows 7 or Windows Vista http://support.microsoft.com/kb/2688326 files
Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows
Method 2:
Step 1: Run the antivirus in safe mode
Please follow the link on how to start the computer in safe mode with network below.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: Microsoft Safety Scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Let us know the results.
-
This message appears every time that I reboot. I do not know which update is, but he showed now whenever I started the computer last month. How can I stop this message from appearing? I use Windows XP.
See you soonHello
Every time that you start your computer, you see the following message is displayed:
The computer must be restarted before upgrade can continue. You want to restart now?
Your choice is Yes or no. If you click Yes, the computer is forced into a restart, but returns the message. If you click on no, you can work normally.QUESTION: You have an Adobe Reader 8 update failure. This update places an entry into a registry RUN key for the application "AdobeUpdater.exe. "AdobeUpdater.exe" application can be found here: C:\Program Files\Fichiers Files\Adobe\Updater5
If you open these folders and double-click the 'AdobeUpdater.exe' application, you should see the same message as above.
To check if you need to do workaround, do this first. Open Adobe Reader 8. From the Help menu select find updates. If the program checks the updates and concludes that they are, apply. This can solve the problem. But if you see the same error message after a restart,
What solution would you suggest for those who also have Acrobat Pro installed? Uninstalling and reinstalling
Registry key is here:
Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run.
Please, right click on run and export to your desktop and save it as back.reg.
Delete and restart. If the problem has disappeared, open Acrobat, and try to run the update - help-> updateYOU PACK THE FACE WITH THE STEPS ABOVE, THE QUESTIONS PLEASE FOLLOW:
Error 'Need to restart the computer', after you run the Adobe Update Manager
Question
After you run the Adobe Update Manager, you receive the error message "Need to restart the computer." You receive the error message during all subsequent restarts of the computer.
Solutions
Do one or more of the following solutions:
Solution 1: Delete the file of transaction of AUM.
Delete the file AUtrans.xml the Documents and Settings\ [username] \Application Data\Adobe\Updater folder.
Solution 2: Remove the Adobe Updater.exe registry key if it exists.
Warning: The registry contains information on the system that are critical to your computer and applications. Before editing the registry, be sure to make a backup of it. Adobe provides no support for any problems that result from incorrectly modifying the registry. Adobe strongly recommends that you have experience editing system files before you modify the registry. For more information on the Windows Registry Editor, see your Windows user's guide or contact Microsoft Technical Support.
To remove the Updater.exe Adobe key:
1. go to hkey_current_user\\software\\microsoft\\windows\\currentversion\\run.
2 Select the AdobeUpdater.exe key (if it exists) and then choose the editing command > delete.
3. click on Yes in the dialog box confirm deleting key.
Solution 3: Find and remove the AdobeUpdater.rbt file if there is.
1. choose Start > search.
2. under what Do you want to Search For, select all files and folders.
3. in the all or part of the file name box, type: AdobeUpdater.rbt
4. in the box look in, select your local hard disk.
5. click on search.
6 remove the AdobeUpdater.rbt file search results if it is found.
-
There is not an option on windows live photo gallery to burn photos to a cd/dvd. When a blank disc is inserted a used screen appears saying "you have inserted a blank disc, what do you want windows to do?" There will be options like 'create a cd with windows media center', or 'create a DEC using corel photo album 6 ", etc... Create a cd using windows live photo gallery, but this option is no longer there.
There is not an option on windows live photo gallery to burn photos to a cd/dvd. When a blank disc is inserted a used screen appears saying "you have inserted a blank disc, what do you want windows to do?" There will be options like 'create a cd with windows media center', or 'create a DEC using corel photo album 6 ", etc... Create a cd using windows live photo gallery, but this option is no longer there.
=====================================
Take a look at the following articles:Windows Vista-
Burn pictures or videos to a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVDWindows Vista-
How to change the auto run settings
http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settingsWindows Vista-
Troubleshoot AutoPlay
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problemsWindows Vista-
AutoPlay: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions John Inzer - MS - MVP - digital media experience
Maybe you are looking for
-
These are the details. 21 FF does not work on my system, unless I choose Run as administrator. So far, none of the assumptions posted by your technical support on this issue in the past have worked. I removed the virus and removed FF and reinstalled.
-
Satellite A500 - modem broadband 3G does not connect to internet
Hello Can someone please helpI am from Ireland and have a modem broadband three where you plug in the USB, Broadband Mobile it is called. I downloaded the software ok but I can not connect to the internet, always says failed to connect, the modem wor
-
How to remove the brightness/contrast of the display box
original title: box of brightness/contract. I have a black box in the middle of my computer screen telling brightness/contract on top. How can I remove it? I tried everything from my computer
-
Update available but continues to do not...
I've had my laptop for 7 months now and just the other day was eager to make a RESUME for a job, well I got work from microsoft here that I never messed with and decided to open it. Its what is supplied with the computer. So I clicked on update as it
-
How to acquire data from the memory of the meter
I am a beginner of Labview. I don't know how to acquire data from the memory of the meter. I read a few examples of data acquisition, but apparently not similar to my case. I can't use DAQ in my computer, because I don't have DAQ card. Could someone