What should I do when my computer is equipped with a State driver failure?

Similar Questions

• What should I do when my computer is in a reboot loop after installing sp3

  I downloaded and installed windows xp service pack 3. When it was over, the system required a reboot for updates to take effect. When I restarted my computer, it ended in a loop of reboot without end I used my product for rΘparer the systΦme CD and get windows running again. I tried sp3 download and install again assuming that he might just have a little problem the first time, but got the same result. What should I try to do to make sure that I don't end up with this problem more?

  My system is a:
  -Dell Dimension 3000
  -Intel Pentium 4
  -3.00 GHz 2.99 GHz, 512 MB RAM

  Hi Masck84,

  I suggest that you refer the below Microsoft article and try the steps mentioned before installation of the service pack on the computer.

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• What should I do when my computer is to do the diagnostic test, what happens with missing \windows\system,32\winload,exe?

  Please help my friend

  When my computer is to do the diagnostic test, what happens with \windows\system,32\winload,exe lack what should I do now, it's for a friends computer

  Please see: Missing file \Windows\system32\winload.exe

• What should I do when I receive the message 'unable to load the flash shockwave.

  What should I do when I receive the message 'unable to load the flash shockwave.

  Hello

   
  1. how many times you get this error message? This problem is limited to specific Web pages?

  2. Once you get this error message? What is your default browser?

  
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using
  
  3. have you installed new hardware or software before the show?

  4. What is the operating system installed on the computer?

   
  5. are you logged in as administrator?
   
  
  Method 1:
  If you are facing problems with Internet Explorer 9, I suggest you read the article and try to run theFix it:
  Troubleshoot Internet Explorer to IE quick, safe and stable
  http://support.Microsoft.com/GP/pc_ie_start
  Note: Note that the reset Internet Explorer (IE) resets all settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
   
  Method 2:
   
  a. search for Internet Explorer in the start menu.
   
  b. right click and select "Run as Administrator".
   
  Check if the problem occurs.
   
   
  Method 3: Uninstall and reinstall Adobe Shockwave
   
  To uninstall a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  
  I also suggest you to download and install the latest version of Adobe Shockwave player and check if that helps:
  
  http://get.Adobe.com/Shockwave/
  Provide more information about the issue so that we can better help you.
   
  I hope this helps.

• What should I do when my labtop detect two users on my ip addresses?

  What should I do when my labtop detect two users on my ip addresses?

  Look for the reason why.  This is probably a failure in the DHCP settings on a PC.

• What should I do when it says "Adobe Reader cannot open protected mode due to incompatibility with your system configuration"?

  What should I do when it says "Adobe Reader cannot open protected mode due to incompatibility with your system configuration"?

  Hi sharronw31229175,

  Please visit the below links for the same thing that it would be useful:

  Protected Mode Troubleshooting | Adobe Reader

  Adobe Reader cannot open Protected Mode due to a problem with the configuration of your system.

  Let me know how it goes.

  Kind regards

  Ana Maria

• What should I do when the installation program stops at 39% and said "webget failed"?

  What should I do when the installation program stops at 39% and says "web get failed? I have a MacBook Pro.

  If you don't see that when downloading, either use another browser or use another (wired) connection and/or use a download manager.

• What should you set when you get 'not an apple developer certificate valid' in dps app Builder?

  What should you set when you get 'not an apple developer certificate valid' in dps app Builder?

  You should try to rebuild your developer certificates. That you are trying to use is not valid (maybe it expired?)

  Neil

• What should I do to get Photoshop 12 compatible with Windows 10 items?

  What should I do to get 12 items compatible with Windows 10 Photoshop?

  Hi theodorek

  Please make sure that your computer meets the system system requirements minimum requirements. Adobe Photoshop Elements

  Run Photoshop Elements as administrator (right click "Photoshop Elements icon and select" Run as Administrator)

  If it does not start, run it in compatibility mode

  Right click on Photoshop Elements icon > properties > compatibility > Select Windows 7 slot "run this program in compatibility mode for".

  

  Let us know if this helps

  ~ Assani

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• What should I do when after Lightrom 6 worked OK and I was rocking it draws to develop, all of a sudden I have started getting the message "folder or file not found?

  I downloaded photos successfully in Lightroom 6 and were able to develop and even export but suddenly in the process of development or export, Lightroom gives the message "File not found" and "file cannot be found. These pictures are already in Lightroom, how can't he not know where they are? And is it a problem with Lightroom, my computer, or what I did? And what should I do to correct this?

  Photos are never stored in Lightroom. They are stored on your hard drive somewhere, instead you put them, or to the place where you education Lightroom to put them.

  Lightroom is a database. When you import a pohtos, a record is created in the database for each photo, which contains the file name and the location of each photo. When the photo is no longer in the location Lightroom is looking (because somehow the file or folder has been moved, renamed or deleted outside of Lightroom), Lightroom indicates that it does not find the photo (or the photo is missing).

  Therefore, find the photo using your operating system. Once you have found the photo, you must tell Lightroom where the photo is, and what's his name. The exact tools used in this step are described here indetail: Adobe Lightroom - find folders and files moved or missing

• What should I do when I can communicate with my instrument NI MAX through other programs, but not of LabVIEW?

  Hi all, this is a question that I had a few times before in one form or another.

  I use a Boxcar Integrator (245 SRS is the interface) for my experience. I connect to it via GPIB using my Agilent GPIB/USB interface. My program runs in LabVIEW, and I used it successfully in the (very recent) past.

  However, sometimes if I get LabVIEW or something, some weird stuff starts past trying to connect to it. For example, after the LV exit and go back to the top and any attempt to run my program, it throws the error:

  Error 1073807339 has occurred in the CITATION read in OR_Boxcar_ReadAnalogPort3.vi-> OR_Boxcar_SimpleTest.vi
  
  Possible reasons:
  VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Which essentially means that he cannot connect for some reason or another (don't worry, I'm on the right GPIB address).

  So I go to equivalent NI MAX or Agilent (Keysight connection Expert), proceed to part communication from VISA to either and manually, connect with the machine. And it works! If clear my computer is communicating with the machine at this point, but not of LabVIEW.

  This could be the cause, and what I might try? Thank you!

  Oh shit, I forgot about it! I solved the problem, it was actually a 'me' problem is not a problem of LV. Even my solution would not be to help someone else who finds it. I was trying to read from my instrument, but it is in synchronous mode, so it generates an error if you try to read her when a data point has not been loaded in its buffer. I did something unusual, so it was not a point of data loaded into its buffer.

• What should I do if my computer Action Center message says: "your Intel Graphics Driver has stopped working twice?

  My computer message of the Action Center said: "your Intel Graphics Driver has stopped working twice?

  What should I do to solve the problem?

  Hello AletBotes
  Try to uninstall the old version of the graphics driver Intel or by reinstalling fix it. It is always best to update the drivers to the latest version you can find on the website of the manufacturer of the computer. If you have no problem with the video/graphics and if the Action Center message bothers you in any way, you can turn it off in goin to this place the Center Items\Action Panel\All Control Panel control and then in the left pane click on change Action Center settings > uncheck the required Notification or uncheck everything. Click OK. That's all.

• What should I do when the correct CVV number is not being accepted by iCloud?

  I'm trying to add a family member to the iCloud account, but she asked the CVV number for the account.  I entered the right CVV number, but he says it's the wrong number.  What should I do?

  See this - change or remove your Apple ID - Apple Support payment informationand if it does not help, scroll to the bottom of the article where you will find a contact for iTunes link which can help in this matter.

• What should I do if my computer says that the DVD player is not correctly?

  Problem with the DVD player:

  It shows that the DVD player is not correctly.

  What should I do?

  Please, help me to solve this problem with DVD player: it shows that the DVD player is not correctly. And it is not ejected.