This AE work?

Similar Questions

• I no longer get suggested words when composing a message text on my iphone 5.  How to get back to get this function works

  I no longer get suggested words when composing a message text on my iphone 5.  How to get back to get this function works

  Make sure that the text is on. You can do this on the keyboard (if you have several) by pressing and holding down the button to change between them.

  

  Alternatively you can go to settings > general > keyboard and make sure predictive is turned on (the switch must be green).

  If you see the image below, press the small white bar above the buttons T and Y and slide upward slightly.

  

• This software works well with Mac to convert EPS files in JPEG files?

  This software works well with Mac to convert EPS files in JPEG files?

  EPS to jpg converter

• This software works with the pencil of apple

  I have a pencil to Apple, this software works with it and it can be used with MS Word?

  (1) good for you

  (2) have you tried google?

  pencil.html http://www.CIO.com/article/3005172/iPad/iPad-Pro-14-Apps-Enhanced-for-the-Apple-

  http://www.digitaltrends.com/mobile/best-iPad-Pro-drawing-apps/

  (3) not for the moment.

• Please can someone explain how this circuit works?

  I was digging through some old files left here by a former employee and found this.  There is a text file with it that said it was a temperature alarm that was supposed to have a green light when the temperature was between 50 and 100, but a red light at any other temperature.  I can play with it and see that the lights are changing, but how to check temperatures?  Also, how this circuit works?  I never did something like this on my own, but I see what seems to be a comparator is powered by two OPERATIONAL amplifiers.  May of you please enlighten us on this so I can prove that it works?  I have a use for this, but I need to know if it will work in its current form, or if I need to make some adjustments.

  

  Although this tour might work in simulation there several defects that could cause problems if implemented in hardware.

  First, the Thermistors generally have a nonlinear inverse relationship to temperature. In this case this isn't a huge deal since temperatures too high or too low, the two are supposed to turn on the red LED. However, defining the thresholds of comparator at 1/3 and 2/3 of Vcc2 aren't very likely to correspond to the desired temperature.

  Then the LM324 has an R4 and R5 totem-pole output circuit are rather empty.  The output circuit can source or sink tens of milliamps for emitter junctions base of Q1 and Q2 may be vulnerable to damage.

  When Q3 and Q4 are disabled, as shown in the picture, the current flowing through the Green LED is 30 my. Indication LEDs are usually evaluated for 20 my or less.

  When Q3 or Q4 is enabled, the current flowing through the red LED is limited by the transconductance of transistors or the V-I characteristic of the diode. In both cases, the values are almost certainly in the 'let the magic smoke out' of the LED range.

  Although not destructive, Q3 and Q4 are not necessary.  The logic can be changed by reversing entries for the elements of comparison and by replacing maybe to OR AND on the transistor connections.

  Lynn

• HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

  HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

  I want to put in a 60 GB SSD into the CD slot and want to see how fast it will support as this will be used for the Cache

  Thank you

  The published information is not explicit; He says only: SATA for the expansion Bay while the main hard drive Bay expressly says SATA-III. However, given that this isn't just an optical drive Bay, but also a general 'Bay expansion', it is safe to assume it of on the same SATA bus as main drive and is a SATA III interface.

  Data sheet

  6470b is also supposed to have a slot for a WSSD mSATA, but he is not described in the Manual:

  Manual

  Obviously the WSSD would work better for cache but you can use a 60 gig SSD in an expansion bay for both cache adapter. Even if the connection is SATA-II, it will be much faster to work for a cache of acceleration.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  I had the hard drive of my worn desk w / Vista HP layout box HD Startech. This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  Hello
  Yes it will work. You can access files on the hard drive but not the Oprating system hard disk previous. The previous hard drive can be used as hard drive.

  I hope this helps.

• My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse. This mouse works on another pc... I am getting error usb? I removed & charged all under the usb tab__

  My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse.   This mouse works on another pc... I am getting error usb?  I removed & charged all the usb tab

  Hello

  You may need assistance from a real store tech computer (no leeks and glances at a BestBuy or)
  other BigBox stores) or the manufacturer of your system Support.

  What is the error of USB?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Please make these now even though you might have tried this before:

  Remove the mouse if indicated in the Manager of devices - devices of score - click right on - UNINSTALL.

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I NEED ASSISTANCE WITH MY ETHERNET DRIVER. HOW CAN I GET THIS TO WORK NEW TI?

  Original title: driver ethernet

  I NEED ASSISTANCE WITH MY ETHERNET DRIVER.  HOW CAN I GET THIS TO WORK NEW TI

  Download and install it

  The driver should be available in the manufacture of computers site

  Use the snid on a label on the computer to search with while you're there

  Or if the motherboard came with a disc to load and the reader will be on it.

• APPLE MAGIC MOUSE - THIS WILL WORK ON WINDOWS?

  I'm running Windows 7 on two different computers and would like to buy the Apple Magic Mouse (wireless).  It will work with Windows if I install the drivers from third party sites, I see online?
  I like to hear from anyone who tried.  Some reviews say it works... Some say it is not.
  Given that some Apple systems have installed MAC and Windows systems... I don't understand why Apple does not only provide drivers for this mouse works with both.

  Greg

  Hello Greg,.

  Apple magic mouse won't work with Windows 7 or else no matter what Windows operating system. It is specially designed for Mac users and not users of Windows.

  The requirements for the magic mouse from Apple has been considered by the Apple site

  
  The system configuration required

  * Computer Mac with Bluetooth wireless technology
  * Mac OS X 10.5.8 or later with Wireless Mouse Software Update 1.0* or Mac OS X v10.6.1 or later with Wireless Mouse Software Update 1.0
  * Existing keyboard and mouse for the installation
  * Two AA batteries (included)

  For more information about the magic mouse from Apple, visit the following Web site: http://www.apple.com/magicmouse/

  Aziz Nadeem - Microsoft Support

• PC indicates that there is someone else on the net with the same ID on this net work I use

  my pc shows that there is someone else using the same ID that I'm on this net work

  Hi Robert,.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

  1. What is the exact full error message?

  2. When you receive the error message?

  3. do you use wired network connections / wireless?

  If the message is all using the same IP address, I suggest you to reset the router and then reassign the IP manually once and check. You can go through the link to do so.

  Change TCP/IP settings

  http://Windows.Microsoft.com/en-in/Windows7/change-TCP-IP-settings

  Response with more information to help you.

• This app works on my android Tablet?

  This app works on my android Tablet?

  Adobe Comp CC?

  Anthony

  Hi Anthony,.

  Sorry no. The app is not yet supported on the Android platform. I suspect maybe later this year. But... If you join our community prerelease on G +, Adobe Android Apps - community - Google +, you will know that the minute we have a beta available for testing.

  Hope that helps.

  Sue.

• I am a student and have this version of CC. I've updated my card number and still, it won't let me open or use one of my applications such as photoshop or illustrator. Could someone help me please? I need this to work!

  I am a student and have this version of CC. I've updated my card number and still, it won't let me open or use one of my applications such as photoshop or illustrator. Could someone help me please? I need this to work!

  check your account to ensure that your payment has been processed using your adobe id, https://helpx.adobe.com/x-productkb/policy-pricing/remove-credit-card-info-adobe-account.h tml

  If she is, log out and then back to your desktop app cc using this same id adobe, connect and disconnect activate Cloud Creative applications

• WTH... it became a frustration of long hours, how can I get this download work?

  WTH... it became a frustration of long hours, how can I get this download work?

  Hi gustolis,

  You are on a managed network. If not then please download desktop CC: https://creative.adobe.com/#products/creative-cloud . Sign in using your Adobe Id and password, and try to download Acrobat in the list of applications.

  If stil the same question try please download from direct link: http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html .

  Please follow the very important instructions before downloading.

  Please let us know if it worked.

  Kind regards

  Romit Sinha

• Could some modify this code works for vertical scrolling?

  Hello

  I am a know nothing.

  Read this discussion... http://forums.Adobe.com/message/5501696 .

  UME YOSHIOKA provided the code to control the direction of reading the direction of scrolling animation.

  It is for the horizontal scrollbar only.

  His example of it in action... http://Ciruelo.jp/js/edge/WS/windowScroll.html

  Very smart.

  Could some modify this code works for vertical scrolling?

  I know nothing and I don't know if I'm too ask.

  My attempts have failed.

  The code is

  var totalFrame = 6250;
var stageWidth = 10000;
var maxScrollLeft = stageWidth - $(window).width();
var baseFrame = 250;  //for adjustment



  //control the main timeline pos by $(window).scrollLeft() pos.
$(window).scroll(function (e) {
  var scrollLeft = $(window).scrollLeft();              // get scroll pos
  var n = totalFrame*scrollLeft/maxScrollLeft|0;        // calc frame index
  sym.stop(n+baseFrame*(1-scrollLeft/maxScrollLeft)|0); // adjustment & move frame
});

  Thank you

  Hi, epple2013.

  in the case of ths.

  You can use ' $(window) .scroll (func) ' and ' $(window) .scrollTop () ".". "

  $(window).scroll(function (e) {
    // get scrollTop
    var scrollTop = $(window).scrollTop();
  
    // control your timeline by value of scrollTop
    if(scrollTop>100){
      //sym.play(scrollTop); etc...;
    }
  }
  
  

  Here is the sample & source:http://ciruelo.jp/js/edge/vs/vertical.html

  Best regards.

  UME.

• Why won't this script work?

  Well so yesterday I posted a question I had with join InDesign files, I thought that I had found a solution and I was wrong. Nothing is as humbling as script... anyway the gist of what I'm trying to do is trying to combine a lot of InDesign files in a single large document. The problem I encounter is that InDesign crashes. What is strange to me is that a single iteration of this script works oddly, however when I try to do with multiple InDesign files * the bed.

  Any help on the figure, it would be much appreciated.

  System: WIndows 7

  Indy Version: CS5

  (1) selecting a folder.

  (2) get the files.

  (3) open one at a time, and duplicate pages in another document. (Which I call OCD because I basically that is what I want to do with the giant document.)

  (4) close the source file without saving the changes. Pages should not change, but better safe than sorry.

  (5) close the (TOC) destination file and save it with the new pages to this subject.

  inDesign #target

  File = Folder.selectDialog ();

  files = folder.getFiles ("*.") INDD");

  for (var i = 0; i < files.length; i ++) {}

  source_doc = app.open (files [i]);

  destination_doc = app.open (file ("c: / / users//user//desktop//TOC.indd"))

  REST();

  }

  function rest() {}

  sourcePages = source_doc.pages.itemByRange (0, -1);

  sourcePages.duplicate (LocationOptions.AFTER, destination_doc.pages.item(-1));

  source_doc. Close (SaveOptions.no);

  destination_doc. Close (SaveOptions.YES, "c://users//user//desktop//TOC.indd");

  }

  Couple of thoughts: the code is kind of a mess. I don't understand why you are opening and closing of your doc of destination with each iteration, or why you have stuff separated in another function, or why you have not any vars. As a general rule, I try to work on spreads rather than pages where possible. I avoid also itemByRange() because of the strange plural object that it returns. Here's one (in my opinion, in any case) cleaned script:

  var folder = Folder.selectDialog(),
      files = folder.getFiles("*.INDD"),
      destination_doc = app.open(new File("c://users//user//desktop//TOC.indd")),
      source_doc, i, j;
  
  for (i = 0; i < files.length; i++) {
      source_doc = app.open(files[i]);
      for (j = 0; j < source_doc.spreads.length; j++) {
          source_doc.spreads[j].duplicate(LocationOptions.AT_END, destination_doc);
      }
      source_doc.close(SaveOptions.NO);
  }
  
  destination_doc.close(SaveOptions.YES);
  

  See if you have better luck with it.

  Jeff