What size should my site horizontal scrolling?

Similar Questions

• What size should be a web page?

  Hello

  I am new to Dreamweaver (impression is my job) and I don't know what size I should do the width of my web page if it can be displayed on a screen average...

  I did a header at 800 pixels in Photoshop, but it seemed lost when I saw in IE8. I watched a lot of DVD and read quite a few books on Dreamweaver but not one has said.

  I can't repeat that it is a basic photo

  All advice would be helpful.

  Thank you

  Hello

  expect that the width of your page is comfortably seen by the majority of visitors to your site without using the scroll bars (not too bad are 900 to 1100px). To view your site in a comprehensive manner with critical eyes, 'Google labs - the browser size' are a very good tool:

  http://browsersize.googlelabs.com/

  Hans G.

• Satellite M40X-189 - replace HARD disk - what size should I go to?

  Hi, I have a SATELLITE M40X-189, I would like to replace the hard drive and would like if possible some recommendations!
  I know I need an ide/pata and I currently have a hard disk of 40 GB hitachi 5400 rpm installed. The memory is just what came installed originally, (512 MB, no upgrade).

  So what size I can up to?
  I have a lot of music/photos and video to change so must also size decent 80 GB would be enough?
  I really don't use it for anything other than that, and also the navigation on the internet. Although I often have a few programs running at the same time which causes problems... freeze, (in particular I tunes) and generally slow running.

  I'm confident on the physical replacement, and I know how to clone my old drive hard etc, but just need some info about the size and speed and if possible
  a recommendation of the manufacturer. Just worried about incompatibility really issues.

  Also, if you think I should install more memory, which size and make and model may recommend.

  Thank you in advance!

  Denise.

  Hi mate

  First he must know that this question have been posted a lot of time in the forum.
  If you want to use the search option, then you will find this thread for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=68287

  Is the M40X series supports the IDE controller and I think that you need a 2.5 IDE HDD.
  The old ide controllers are limited to 128 GB with 28-bit LBA
  However, you can take an 80 GB or 120 GB HARD drive and it should work fine

  Welcome them

• What size should be more PGA or CMS?

  While the creation of database of 4 GB which size should be more PGA or CMS? do you recommend the size?
  Thank you.

  You can set the AMM and database automatically select the correct value for the SGA and PGA:
  http://docs.Oracle.com/CD/E11882_01/install.112/e24321/inst_task.htm#BABBBHJH

  Specify Configuration Options:
  Provide the following configuration information, and click Next:
  Memory:
  The Enable Automatic Memory Management option is selected by default. This option enables the database to automatically distribute memory between SGA and PGA. If you deselect this option, then the SGA and PGA must be sized manually.
  

• Qosmio G10-100: HARD drive failed - what size of HARD drive I need to purchase?

  My hard drive failed after 4 years reliable. HD of what size should I buy? (2.5 "or 3.5")

  All other things to consider when buying a laptop compatibility internal HD?

  Thank you!

  Ben.

  Gardman is right there are 2.5 "HDD with IDE (ATA-5) interface.

• Acer Aspire V5 - 431 - what size screws are needed?

  Missing a few screws on the bottom of my laptop and a relative of the missing angle is originally the keyboard part split do my fuzzy screen. Need of replacements as soon as possible, but what size should I? In addition, where the best place to buy from?

  Hello

  Thanks for your image!

  The missing screws are same as locating nearby.

  Here are the specs:

• How do you prevent site of scroll horizontally in Dreamweaver?

  I created a site that (although I don't see scroll on my computer and 2 others in several browsers) has a scrolling horizontal bar when my client views on his computer. I have problems troubleshooting since I don't see the problem clearly. I'm a little behind the curve on the creation of entirely sensitive sites and I am convinced that something I did to make this attentive created the problem. If possible, is - someone can take a look at the code for the links and tell me if you see any obvious corrections I can do in Dreamweaver or the code to make the pages horizontally stationary with no horizontal scroll bar? Please let me know if you need more information, and what it is.

  Link 1: http://www.impressionsofbeauty.com/

  Link 2: http://impressionsofbeauty.com/corporate_indexb.html

  Any help would be greatly appreciated.

  I just right click on the images to see their properties. Of course, you have to crop and optimize images for the web in your graphics editor.

  You have not developed a CSS formatting yet so this is where you start.

  If you have CS6, use the built-in feature of fluid grid Layouts.  Building Mobile first because that's what everything else is built.  Then create your Tablet formatting and finally available to your office.

  CS6 (17 min video) fluid grid layouts

  http://TV.Adobe.com/watch/learn-Dreamweaver-CS6/using-fluid-grid-layouts/

  Improvements to grid fluid creative cloud 12.2

  http://blogs.Adobe.com/Dreamweaver/2013/02/updated-fluid-grids-in-Dreamweaver.html

  Step by step tutorial - fluid construction grid Layouts in DW CS6

  http://www.Adobe.com/inspire/2012/08/fluid-grid-layouts-Dreamweaver-CS6.html

  If you do not have CS6, download and install this free extension Bootstrap of DMX Zone.

  http://www.DMXzone.com/go/21759/DMXzone-bootstrap/

  Good luck!

  Nancy O.

• Some web sites do not display a bar of horizontal scrolling but IE don't

  For example: http://shop.ghirardelli.com/category-exec/category_id/35/nm/Sale/?utm_source=chocomail & utm_medium = pos1_save10 - 30 DL & utm_campaign = 20111124

  This site uses the CCS code (overflow-x: hidden) to hide the horizontal scroll bar.
  
  It is also missing in Google Chrome.

• should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  In the preferences, select scale to frame size and then any media imported after the modification will be automatically resized to fit your sequence.

  Thank you

  The f

• Horizontal scrolling of receptive office site

  Hello everyone,

  I am writing to ask how can I make this website 100% reactive Office device:

  http://desk-horizontal-scroll.BusinessCatalyst.com/index.html

  At present, it is optimized for a resolution of 1920 x 1080 and has a horizontal scrolling navigation with anchor points.

  Thank you 1 million,

  Joe

  You will not be able to make a site of significant horizontal scrolling. To be admissible, it must work outside the width of the browser and register in this width. So, if you were to do that with the site you have, it would be, but all of the pages in the browser and narrowing them down or pile up on each other and be vertical scrolling. The only way I can think of to have a sensitive side scrolling site would create throughout the site along the only animate the real edge animation must adjust to the width of the browser.

• What size my image of background layer should be for the web?

  I do a logo design for someone I know and he wants that he placed ontop of a background texture steel. I source on an image of good quality, but despite my diligence in trying to understand how the resolution and the size of the image, I can't seem to grasp what I should do with it. I saw countless videos, but it must be a problem with the ol' brain ' in the head I.

  It is likely (at least for now) just for the web. My goal is just get it right so that it looks crisp and clear on the screen.

  The image I have is 1024 x 1384 pixel, 72 dpi. Yes 14.2 inches wide by 19.2 inches high.

  I have to change this at all? I'll be crop the image, but I'm worried that I will do it's too small and so it should be expanded, and I could meet some blurring.

  Should I expand? I heard that this isn't the most ideal thing.

  72 dpi is higher than the resolution must be for images of the screen, but is there an advantage to hit? Why couldn't just do 300 dpi for the heck of it?

  Do I need to pay attention to the thumbs, or is - this just good guide for when you print something?

  I'm honestly just trying to get my head around all of this, so that in the future, I can't spend as much time to know what I have to do. Everything I read and any help is greatly appreciated.

  I believe that we have the impression that the image was for the entire background. Being its a banner among the dimensions should be much smaller and therefore can be a picture of lower resolution due to this fact.

  With respect to the other dimension, this will depend on your design. For example it will fill the width or height of the screen?

  With respect to models, you send a single image to a web browser and the browser itself repeats this image. This is why it is desirable. Your image can be 10 x 10 pixels pixels in the right circumstances. For any detail real chances are she would most likely be around 512 x 512. More this image is the faster it will load, it is that she may have more details. Its up to you to find this balance.

• How to make a Horizontal scrolling as this Web site?

  Hi guys

  I just see the 'site of the Day Muse' of http://www.selvagreenng.com very well done...

  I have a query than the way they did the Horizontal scrolling when the message by clicking on the Navigation on the next page is displayed? which Widget they used or custom code it used?

  could someone there explain to me?

  Thank you

  I made this site. Anchor of Muse has been used. Muse handled the default scrolling. Custom jquery no was used.

• X 1163 projector shows smaller than the computer screen image and creates the horizontal scroll bar

  I just bought an Acer X 1163 projector for use in presentations. I like the brightness, size and features. I am disappointed to make a PowerPoint slideshow, you need to buy another remote, but it is an easy fix.

  Here's what's really about me!

  When I pull a Web site or other things on my laptop for the presentation, it has a horizontal scroll bar and does not fit it on the screen. I tried different settings and who are seeking an answer online, but can't find what I can do to get the image to display without a horizontal scroll bar.

  I'm almost beginning to panic that I bought this for a large presentation I have to give next week. I hope it's one of those stupid questions with an easy answer.

  Thanks in advance for your help.

  My techy boyfriend just called. Here is the solution. (It kills me when someone has a question asked and more later said: "never mind, I figured it" and never says how do to the next person to come.)

  The question seems to be in the computer resolution setting and how it automatically resets when plugging n the projector. To resolve this problem (at least in windows 7) follow these steps:

  Right click on the desktop

  Click on display

  Click on change display settings

  Select the 1366 x 768 resolution

  It shows exactly what I'm looking for now on my computer.

  Thank you for having a forum to ask in all cases

• How to set horizontal scrolling to horizontal field Manager when fields are added using a loop for?

  The following code snippet contains a horizontal field Manager to which are added five buttons.

  1. I can't the value of horizontal scrolling to horizontal management Manager because of who I am not able to access the keys 4 and 5.

  2. usually, we put horizontal scrolling in the following way:

  container = new HorizontalFieldManager(USE_ALL_WIDTH|HORIZONTAL_SCROLL|HORIZONTAL_SCROLLBAR);
  

  3. so I also tried setting of horizontal scrolling in the following way

     container = new HorizontalFieldManager(Manager.HORIZONTAL_SCROLL|Manager.HORIZONTAL_SCROLLBAR)
              {
  
                  protected void sublayout(int maxWidth, int maxHeight) {
  
                      Field field = null;
                      int x = 0;
                      int y = 0;
                      int maxFieldHeight = 0;
                      int maxFieldWidth = 0;
                      for (int i = 0; i < getFieldCount(); i++)
                      {
                          field = getField(i);
                          layoutChild(field, maxWidth, maxHeight);
                          setPositionChild(field, x/*width-field.getWidth()*/,y);
  
                          x+=field.getWidth();
  
                          maxFieldWidth = maxFieldWidth + field.getWidth();
                          System.out.println("field width"+field.getWidth());
                          System.out.println(" max field width"+maxFieldWidth);
  
                          if(i==0)
                          {
                              maxFieldHeight = field.getHeight(); // height set of the first button since all components have the same height
                          }
                      }
                      System.out.println("final max field width"+maxFieldWidth);
  
                      setExtent(maxFieldWidth, maxFieldHeight);
  
                  }
              };
  

  but it's not working.

  4 I found this property: (position) horizontalFieldManager.setHorizontalScroll; that contains the parameterioo where the post is supposed to be the new horizontal scroll position. I tried passing the coordinate x of horizontal field Manager, but it does not work. I should pass as a parameter position?

  HorizontalFieldManager container = new HorizontalFieldManager()
  {
      protected void sublayout(int maxWidth, int maxHeight)
      {
          Field field = null;
          int x = 0;
          int y = 0;
          int maxFieldHeight = 0;
          for (int i = 0; i < getFieldCount(); i++)
          {
              field = getField(i);
              layoutChild(field, maxWidth, maxHeight);
              setPositionChild(field, x,y);
              x+=field.getWidth();
              if(i==0)
              {
                  maxFieldHeight = field.getHeight(); // height set of the first button since all components have the same height
              }
          }
  
          setExtent(Display.getWidth(), maxFieldHeight);
  
      }
  };
  
  ButtonField button1 = new ButtonField("Button1");
  ButtonField button2 = new ButtonField("Button2");
  ButtonField button3 = new ButtonField("Button3");
  ButtonField button4 = new ButtonField("Button4");
  ButtonField button5 = new ButtonField("Button5");
  
  container.add(button1);
  container.add(button2);
  container.add(button3);
  container.add(button4);
  container.add(button5);
  
  add(container);
  

  Need your valuable comments and suggestions. Please help me.

  I think that there is a bug in the sublayout (your HorizontalFieldManager 0 mode.  Given that the code did what I think WHAT HFM will do anyway, I recommend that you try to do this with a standard HFM, using this style:

  Manager.HORIZONTAL_SCROLL | Manager.HORIZONTAL_SCROLLBAR

  Let us know how you go.

  When I have more time I'll explain the bug, but if you want to investigate something, be aware that the maximum size that you can use in setExtent are the values that are passed to sublayout.  Compare the width as you try to define in setExtent whose width is increased.

• Horizontal scroll bar (Possible Bug)

  Hello

  I'm working on a site and I encountered a strange bug that adds a horizontal scroll bar on my page, and I have no idea why. Although there are elements that are outside the page, the scroll bar appears way before they near the edge of the browser window. This happens in Chrome, Safari, and Firefox.

  What is very strange, it is trying to solve the problem, I deleted several items in my file of available to muse, and I found what was causing the problem. I have blue bars which act as headings for each section, and they are not 100% width (and I don't want them to be), and they were not off the page. However, once that I removed those, stopped scrolling bar so soon indicating when to reduce the window of the browser. I added bars, one by one and found that depending on where to place the vertical bar will have an impact on the horizontal scroll bar. This seems to happen whenever my bar is played below y: 1030. I've added screenshots to show this, and I can email my Muse of Adobe support file.

  Some of you will notice that I don't have an item that hangs off the page, and it's true, I do not think it affects the issue I'm having. When I remove the rectangles blue as described in the previous paragraph, the site is behaving as expected, even with my ribbon attached to the page. The blue rectangles, the scroll bar appears before the browser window meets the Blue Ribbon.

  I spent a lot of time looking for a solution and playing with the elements on my site and page properties, and I can not solve the problem. Just that there is no scroll bar until the window is actually lower on the page.

  Screenshots:

  Thank you for the great repro case. It has been exceptionally helpful.

  You have exposed a bug that has probably been there forever which requires only the right combination of objects on the page and off the left of the page in order to be triggered. Let's write a bug to study for a future version. Unfortunately, the next major release is due soon, so this bug will not be fixed in time for this release.  https://creativecloud.adobeevents.com/ccnext

  A solution (that probably seems arbitrary, but should work in all cases) is to group the blue box with any other object. Sorry for the confusion and inconvenience.