What tool 'snapshot '?
I don't find in DC (Italian) old snapshot tool very useful. ! !
Do not use PDF changes. Use the following menu:
Tags: Acrobat
Similar Questions
-
On a Linux operating system, what tools need to developed a real-time application communicating with FPGA?
It is not unclear to me by reading the documentation on the website OR tools or drivers should I install on a Linux operating system in order to develop a C++ real-time application (that interact with FPGA) which will take place on a sbRIO-9651.
Is this possible at all?
Thank you
Michel
Everything works very well with an FPGA VI, compiled with LabVIEW FPGA 2015.
1. I have installed Eclipse on CentOS 7 with cross-compiler found at this link:
Compilers C & C++ GNU for Linux ARMv7 (Linux host) 2014
2. I also install a debugger crossed to debug application c / c++ remotly. Once on the page go in the section "Linaro Toolchain for Cortex-A" and download the second link linux "linaro-toolchain-binary (big-endian). The binary gdb is in there, so you must point towards him in the Eclipse debug configuration:
3. I installed the linux drivers from NOR-RIO 15:
4. I was able to program an application to c / c++ opening and running a LabVIEW FPGA Bitstream in a few steps:
Example of API Interface FPGA C OR real time Linux and Eclipse
Michel
-
Can what tools I use to get rid of a virus?
Original title: need a simple answer of Windows professionals only... So please help! Its driving me crazy!
Hi there, if you are a Geek of MS Tec, I hope I get this response has you :) cos I look on the net and if you don't find an answer. My Question is... I also like to know what tools do a computer expertise use too find and get rid of the virus? Thank you. Dion ;)
Hello
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Hi I'm Riou of the India... can someone help me what tools to download for the blackberry application development and its links? Please help me...
You can also use following link to downlaod eclipse and eclipse plugin for blackberry.
http://NA.BlackBerry.com/eng/developers/javaappdev/javaeclipseplug.jsp
-
What tool is used to open and read files in UCS tech support
Hello
Due to internal of Infosec policies, I need to open and read the support tech UCS files I generate before sending them to the Cisco TAC. Can someone tell me what tool I can use to accomplish this task? Thank you.
Any decompression program that can read the .tar such as WINRAR files.
Robert
-
Hi all!
I have years of experience using Photoshop, and I have used CC for quite a while now. Last year, I used a different computer more powerful than I have now, but I don't remember ever having this problem. It is less of a problem and more of a preference, but its still slow me down. Whenever I open it Photoshop (I only noticed this in Photoshop until now) my workspace is saved, but my toolbar doesn't remember the last tools I was using.
For example: if I've been using the polygonal lasso tool, then close Photoshop and reopen, it is by default in the standard lasso tool.
Does anyone know if there is a way to save what tools were used for the purpose or more often?
Thanks in advance!
[Moved from the living room Forum for specific forum - Mod]
Photoshop CC 2015 still remembers the tool, I'm the last one used. This looks like a problem suddenly, and many times they can clear up by a tidal wave of preference.
Try to reset the Photoshop preferences file:
Manually; course may be cancelled:
Fast; cannot be undone:
Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.
Mac: Press Cmd + Opt + shift then launch Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.
-
What tool so that I can make of the colored rectangles?
What tool so that I can make of the colored rectangles?
The rectangle tool, the rectangle roundeded tool or the Rectangle tool.
-
I would like to combine Word and Excel documents into a single pdf file. What tool allows me to do this?
Adobe Acrobat.
-
For Inter-VM monitoring at work, what tools are need must be installed?
Hello
I read in Vsphere HA doc who, for the virtual machine, including monitoring at work, some Vmware tools must be installed.
When you turn on tracking of the VM, the VM (using VMware Tools) monitoring service evaluates if each
virtual machine in the cluster is running by looking for regular pulsations and i/o activity
Can someone confirm what tools need to be installed?
Thank you!
Just VMware tools, it is a good practice anyway. Also keep in mind that in order for "Application Monitoring" works, you will need to download / install a separate package.
-
IE8 Test - what tool do you use?
I used to use IETester for testing in this browser. What tool is recommended now?
I use the F12 developer tools in IE10 and opt for the mode browser 9 and 8.
-
[tools help] what tool can be used to move files? and update the row in table?
I need help to find out what tool can help me in the next task:
#1 moving file
situation: after the extraction of a file, the file is moved to another directory.
Update SQL #2
Situation: what mapping tool can be used to update existing record / execute sql
as UPDATED VALUE TABLE WHERE... or REMOVE...Take the employee data form table and connect name, id, "incative" (from constant) to the target table.
Replace the update target property, and then set the properties of column-level.Find out what
See you soon
Katia -
VM_STATE_INVALID_CONFIG after installation CD with vmware-tools + snapshot
I have VM_STATE_INVALID_CONFIG
VM has CD snapshot and Mount for vmware-tools
Virtual machine does not work
This article can not help me http://communities.vmware.com/message/752718?tstart=0
because the vm do not have this string in the VMX file.
Could you help me? Thank you
More information:
ls - al
Total 48587584
-rw - 1 root root 151009280 Dec 14 12:50 Syslog-000001 - delta.vmdk
-rw - 1 root root 247 14 dec 09:54 Syslog - 000001.vmdk
-rw - 1 root root 201410560 Dec 14 12:50 Syslog_1-000001 - delta.vmdk
-rw - 1 root root 251 14 dec 09:54 Syslog_1 - 000001.vmdk
-rw - 1 root root 42949672960 Dec 12 03:34 Syslog_1 - flat hard
-rw - 1 root root 401 9 Dec 18:25 Syslog_1.vmdk
-rw - r
r1 root root 37 Dec 9 18:25 Syslog - 68f713a2.hlog-rw - 1 root root 6442450944 Dec 12 03:34 Syslog - flat hard
-rw - 1 root root 8684 Dec 14 12:50 Syslog.nvram
-rw - 1 root root 20092 Dec 12 03:34 Syslog - Snapshot108.vmsn
-rw - 1 root root 398 9 Dec 18:25 Syslog.vmdk
-rw - 1 root root 586 12 dec 03:34 Syslog.vmsd
-rwxr-xr-x 1 root root 3102 Dec 14 12:50 Syslog.vmx
-rw - 1 root root 261 Dec 10 04:04 Syslog.vmxf
-rw - r
r1 root root 158208 9 Dec 18:25 0.log - vmware-rw - r
r1 root root 42727 20 December 2008 vmware - 279.log-rw - r
r1 root root 102832 20 December 2008 vmware - 280.log-rw - r
r1 root root 1033233 7 April 2009 vmware - 281.log-rw - r
r1 root root 14 May 2009 392257 vmware - 282.log-rw - r
r1 root root 1827259 26 Nov 15:23 vmware - 283.log-rw - r
r1 root root 44195 26 Nov 17:44 vmware - 284.log-rw - r
r1 root root 54573 Dec 14 12:50 vmware.logCat Syslog.vmx
#! / usr/bin/vmware
config.version = '8 '.
virtualHW.version = "4".
floppy0. Present = 'true '.
NVRAM = "Syslog.nvram."
deploymentPlatform = "windows".
virtualHW.productCompatibility = "hosted".
Tools.Upgrade.Policy = "manual".
powerType.powerOff = "default".
powerType.powerOn = "default".
powerType.suspend = "default".
powerType.reset = "default".
displayName = "Syslog".
extendedConfigFile = "Syslog.vmxf".
scsi0. Present = 'true '.
scsi0.sharedBus = 'none '.
scsi0.virtualDev = "free".
memsize = '512 '.
scsi0:0. Present = 'true '.
scsi0:0. FileName = 'Syslog - 000001.vmdk ".
scsi0:0. DeviceType = "scsi-disk" hard
SCHED.scsi0:0.shares = 'normal '.
scsi0:1.present = 'true '.
scsi0:1.filename = "Syslog_1 - 000001.vmdk".
scsi0:1.DeviceType = "scsi-disk" hard
SCHED.scsi0:1.shares = 'normal '.
ide0:0. Present = 'true '.
ide0:0.clientDevice = 'TRUE '.
ide0:0. FileName = ' / usr/lib/vmware/isoimages/linux.iso '.
ide0:0. DeviceType = "cdrom-raw"
ide0:0.startConnected = "FALSE".
floppy0.startConnected = "false".
floppy0. FileName = ' / dev/fd0.
floppy0.clientDevice = 'true '.
ethernet0. Present = 'true '.
ethernet0.networkName = 'network of the VM.
ethernet0. AddressType = 'vpx.
ethernet0.generatedAddress = "00:50:56:bf:0 b: cf.
chipset.onlineStandby = "false".
guestOSAltName = "Red Hat Enterprise Linux 5 (32-bit)"
guestOS = "rhel5.
annotation = 'server tftp, syslog, snmp, ntpd yum trap '.
UUID. BIOS = ' 50 12 33 50 e0 d8 d8 - 42 b0 65 3f 1 d dc 8A b8 65.
log.fileName = "vmware.log.
Snapshot.action = 'keep '.
SCHED. CPU.min = "200".
SCHED. CPU. Units = "mhz".
SCHED. CPU.shares = 'normal '.
sched.mem.MinSize = '30 '.
sched.mem.Max = '512 '.
SCHED.mem.shares = 'normal '.
toolScripts.afterPowerOn = 'true '.
toolScripts.afterResume = 'true '.
toolScripts.beforeSuspend = 'true '.
toolScripts.beforePowerOff = 'true '.
CPUID.1.ECX = ' R -
RRrR-0-H - RR -"
CPUID.1.ECX.AMD = 'O-
RCPUID.80000001.ECX.AMD = '-'.
RR - RR"
CPUID.80000001.EDX = "-
R""
CPUID.80000001.EDX.AMD = '-'.
"
checkpoint.vmState = «»
evcCompatibilityMode = "FALSE".
guest.commands.allowSharedSecretLogin = «»
guest.commands.sharedSecretLogin.com.vmware.vcIntegrity = «»
guestCPUID.0 = "0000000a756e65476c65746e49656e69".
guestCPUID.1 = "000006f800010800000022110febfbff".
guestCPUID.80000001 = "00000000000000000000000120000000".
hostCPUID.0 = "0000000a756e65476c65746e49656e69".
hostCPUID.1 = "000006fb000408000004e3bdbfebfbff".
hostCPUID.80000001 = "00000000000000000000000120000000".
scsi0:0. Redo = «»
scsi0:1.redo = «»
tools.remindInstall = "false".
userCPUID.0 = "0000000a756e65476c65746e49656e69".
userCPUID.1 = "000006fb000408000004e3bdbfebfbff".
userCPUID.80000001 = "00000000000000000000000120000000".
VMware.Tools.requiredVersion = "7302".
dMotion.enabled = "FALSE".
tools.syncTime = "FALSE".
UUID. Location = "56 4 d f8 d8 d9 7f b8 d1 - 2 c 24 27 10 2 39 68 16.
Migrate.hostlog = «./Syslog-68f713a2.hlog.
sched.swap.derivedName = ' / vmfs/volumes/494c8e80-a440f279-5164-001cc4c0d240/Syslog/Syslog-68f713a2.vswp '.
scsi0:0. DMotionParent = «»
scsi0:1.DMotionParent = «»
vmotion.checkpointFBSize = "4194304".
-
Cat Syslog.vmsd
snapshot.lastUID = "108".
snapshot.numSnapshots = '1 '.
Snapshot.Current = "108".
snapshot0.UID = "108".
snapshot0. FileName = ' Syslog - Snapshot108.vmsn.
snapshot0. DisplayName = "_VCB-backup_".
snapshot0. Description = "created automatically by VCB framework host VCB to Sat Dec 12 00:34:44 2009 | 0a (UTC). »
snapshot0.createTimeHigh = "293501".
snapshot0.createTimeLow = "888433336".
snapshot0.numDisks = '2 '.
snapshot0.Disk0.filename = "Syslog.vmdk".
snapshot0.Disk0.node = "scsi0:0". »
snapshot0. Disk1.filename = "Syslog_1.vmdk".
snapshot0. Disk1.node = "scsi0:1".
snapshot.needConsolidate = "FALSE".
What do you mean VM does not work?
It does not start, the operating system does not work, cannot remove the snapshot... what part does not work?
You can delete VM from the inventory. Create a NEW virtual machine, punch the config of the hard disk of the computer virtual EXISTING and create a new configuration. Then migrate to move the vmx / vmdk in the same folder, delete the complete original when configuration file.
You can be here all day trying to solve a vmx file, and it still doesn't work. Best thing to do is start over with a new configuration.
-
Camileo P10 - what tools are needed?
Hello
first of all, I wanted to ask what codec is needed to edit the footage shot with a Camileo P10. I wanted to edit videos with Adobe After Effects, but it went all * files, indicating something preblems with audio and played the video chopped and cut. NA not having any problems, even corrupted video files worked better than the sh * this camera grows out of its sd slot.
NO, I don't want to convert the files.
NO, I do have solutions workaround.
NO, I won't buy an another Toshiba cam.
NO, I do have links of old threads that lead me no hand.What I want to hear is what Codec is needed, because there must be a mistake with it. Pieces very well with VLC, but not with WMP, winamp, quicktime, nothing else.
Alternatively, you can suggest some tools that I use. I would have preferred a sledgehammer, but maybe a buzz saw is fine too. Unfortunately, I can't make a video to destroy the cam. You should know why.
Hello
> btw, I thought that it out by myself
You can also post how you set for yourself? I think it would be interesting for other users.In addition, I put t understand your problem. Here he s a user to user forum where you can talk with people like you and me. This means that there is no guarantee that you will get an answer to your question. Not all questions can be answered users then sometimes it s advisable to contact an official authorized service provider. Guys can provide truly professional assistance.
And I doubt that other manufactures have a better support. From my experience, I can say as I m satisfied with this forum and my authorized service provider and as you can read here, that can confirm many other users as well.
Finally and above all the door here in the forum is portable because it s a Support Forum of computer systems that you see under the Toshiba Logo. Do you know what that means? This means that most discussions and users are in the notebook section research and software only.
In any case, I m glad to hear the problem is solved. :)
-
What tool would you use to create optical fiber cables?
I created which, I hope, will be appropriate brushes to create what must be an accurate picture of vector of optical fiber.
My question is, what steps you would use to make realistic fiber in adobe illustrator cc 2015?
I tried the tool brush and pen. However, I found cutting an ellipse in half and using her own path is a good source.
Thank you
So two thoughts here. According to Visual processing, there are many approaches to making it. However, here are two things of Foundation that I consider important for you after your Visual processing is established.
1. create the appearance you want. Below you can see I used a single path with several properties top STROKE in the appearance Panel. Press the button Add race in the pane appearance with this selected path and modify each stroke to get the look you want. Here I use 3 stroke properties. One is black and thick, the second is more thin and grey, and the last is a gradient on an attack of apoplexy that reflects the gradient on the path. Once you have created, select it and press the new button in the Panel of graphic Style. When you draw something, now click that graphic Style and it will make it the path for you.
2. create an Art Brush with scale between the guides. In this way he traces a path with the art brush and always finish by the fibers of the end of your thread unaffected. Draw your image and drag it in the Panel forms. Choose Art Brush as the type, and then click OK.
When the following options come up, then opted to evolve between the guides and drag the guide so you flush the part you want to not scale or adjust.
Now, whenever you draw a path, choose this brush in the brush Panel and it will automatically draw with the part between the guides and add the endpoint without scales or distorted.
Good luck
Bunch of brand
lifebypixels -
What tools do you use to determine the Web sites that your customers are looking for?
We all know and understand what talking about travel buyers. Various research estimated that up to 90% of the search is taking place for most online and before a prospect decides to talk to a sales representative. A session of the CEB Dreamforce I attended to referenced that the average prospect is looking for 10 different sources of information guide their decision to buy and the seller's Web site is just a trust least. (I'm paraphrasing from memory, so don't be too hard on me if something is disabled) It would be useful to know if any of you use tools that help to discover some of these other websites which is underway in addition to our own. Would love to know what works. Thank you!
Hi Joseph, you will have problems on this one. You used to be able to make a number of cough... cough... not strictly beyond the means of the Council.
In the old days, you can use techniques such as SpyJAX, etc. for this - but they don't work anymore
I had a friend that I had used to work with who has worked on a way to push this information automatically in an another marketing automation platform (although you could have done in Eloqua) and adds it to their lead, scoring model.
While on the surface it looked like a really cool idea actually it didn't really prove anything - I digress...
As you quoted the Dreamforce event you attended at the prospect of average search 10 different sources, I think I see what you're trying to identify, you want to know which party 3 different sites of your potential customers are searching on and then find a way to help guide a favorable outcome regarding your product through their research.
First off you should check out some of these Tools to listen to social media. Here those are all free, but you get others who will analyze linkedin, forums, etc. Check out mentions of your competitors brand names and products too.
Now you have a list of the various sources that are using your competitors, you now have your target.
You now have your ammo. You must develop a program of customer awareness. Which is exploit your product advocates, these are current customers, who are very credible, extremely knowledgeable and love your product for its features. There are a number of tools out there, that you can use for this. One of the guys eloqua former albums, Mark organ, developed a software that will help you do just that. Its platform is called influitive. I have been an advocate of product before on this platform and believe me, it's the company. I would probably spend at least one hour per week responding to the challenges posted for me.
For example the company in question had a few targets in the groups they knew prospects would ask "which platform is better, X or Y? I would join this group, they would give me a few points and then they would issue me any time challenges that this type of issue has come. Because I had very deep knowledge on both platforms, I could give an answer that is hinged at the question of the person. I was a 3rd party source, not a salesman saying "I work for company X and my product is the best, call me my details are...» ", this meant that I had a much greater impact in my opinion.
Enter the power of Eloqua. You get your defenders of a link to your Web site and give them their own unique query string. All you need to do is pull a report from query string at the end of the month and voila, you not only what you were originally looking for, but your own clientele that contribute to your marketing effort.
I hope this helps...
Maybe you are looking for
-
Get Fractions as responses instead of values... HP 50G
Hello Since I have reset the HP 50 G, I sometimes get as answers fractions (numbers over numbers, etc.) What is the exact step by step to return a numeric response? For example. Instead of answer = 1/4.90 I should get response = 22.5 My apologies for
-
Satellite 5205-S703 (Windows XP Pro SP2) and TOSHIBA common modules
I have a laptop:Toshiba Satellite 5205-S703.After you have installed Windows XP Pro Service Pack 2, I can't install TOSHIBA common Modules (file: s140acpx.exe).During the installation of this program gives the message:"The installation is failure. Pl
-
The keyboard has stopped working. Seems that one key is blocked 'on' - show the ' # ' at any time. This requires it a replacement keyboard, or can it be fixed? Where to buy a replacement if necessary? Thank you Brian
-
My iphone 5 iOs 9.2 my photos off wifi have tend to be blurry how can I stop this to keep download when I reconnect to wifi?
-
Pavilion X 2: Reset password Bios HP Pavilion X 2
I forgot my administrator Bios for HP Pavilion X 2 password. The error code is 55079458