What two measns of flashing LED?

Similar Questions

• Xperia Z2 orange flashing led when it is connected to the magnetic charge lead

  Hey guys. I bought this phone off of a friend. His three months and works very well. But the other night, I accidentally put the magnetic port on the back and the phone is completely dead. I panicked and I tried every possible combination. I finally got a red when I plugged it into the microusb port. He turned in 10 minutes as usual.

  Now, whenever I have fix the magnetic cord (correctly) I get a flashing led orange and the unit charge at all.

  What is the flashing orange led average? Warranty covers the magnetic port? I hope someone can help me

  Hello everyone. I have problems with the magnetic charge on my Z2 port. He simply not to charge the device. He also was heat when he was in charge via USB. Sometimes, it would not even load!

  I was trying to just live with it until one day the phone turned off and never started upward for about a day.

  I knew at that stage he had no choice but to request an RMA number for these issues.

  When I called to tell them my problems, I told them specifically 'THERE IS a PROBLEM WITH THE MAGNETIC PORT', 'THE PHONE REFUSED to LOAD SOMETIMES' and 'THE PHONE HEATS DURING CHARGE'.

  The representative on the other end told me several times that he understands the problem and they will be addressed when he arrived at the repair shop.

  So, I packed the phone upward and expelled from Ontario (shipping cost me $40) and thinking that once he comes back, it'll work like it should.

  ---

  It's where I've never been more wrong.

  I'll be back on the phone today and it opens as soon as I could.

  First thing I did, is trying to turn it on. Absolutely nothing. No light, no low battery screen, nothing.

  So when I got home, I plugged the thing in a USB AC charger. The first 10 minutes, that there was only one red LED and nothing else.

  After 10 minutes, I could see the green of the battery on the screen.

  Again 5 minutes later, I was able to turn the phone on. He was sitting at 2%.

  What makes me believe that the phone was left or COMPLETELY discharged before shipping. These people in repair facilities don't know how harmful it is for a battery to be discharged to comepletely?

  ---

  The second and most outrageous of the thing is the main reason for the phone was sent he was not yet fixed!

  I tried to plug in the charger magnetic port (with a spare cord, as well as the docking station) and the phone does EXACTLY the same thing!

  In fact, it is an exact quote from that work says:

  "THE PHONE IS IN CHARGE AND WORKS WELL. "PLEASE SEND TO THE CABLE USB AND CHARGER IF PROBLEM P-<- they="" didn't="" even="" finish="" the="">

  "Software update, direct call, past quality control."

  I am so totally outraged and disgusted with Sony now.

• BlackBerry BlackBerry Curve Smartphones - missing icon and flashing LED

  Hi, I just got my BlackBerry Curve yesterday and have two questions that left me mouth gaping so far.

  (1) my menu has no icon "Settings and tools", I tried the option "Show all", still not there. How to do it?

  (2) I have retrieve email on my PC for the most and that you want to turn off the blinking red light because I get lots of emails and the light is constantly flashing and boring.

  Thanks in advance. Andi

  EDIT: Post was shared by another thread, edited title

  God_Graham wrote:

  You can turn off the red flashing notification by going to

  Messages > (key Blackberry) Options > General Options > display indicator new Message 'NO '.

  This will cause the unit to not display the red flashing LED and you will not see a red * click the e-mail until the upper part of the screen.

  The icon options should be on the device, if you are adamant that you can't find it then I would suggest that reload the software on the device.

  Sorry, but will not disable the led red LED, GRAHAM of GOD. Only, it will disable the indicator red star on the e-mail inbox.

  To disable the LED indicator, edit your profiles.

  1. Select the profiles icon

  2. a box will appear where you can quickly choose between Loud, vibrate, quiet, normal, phone only, and outside.

  3. If you want to change the notification of messages assigned for device applications, and then select the last option, advanced options

  4. Select the profile you want to change. (Loud, vibrate, quiet, Normal (default), phone only, Off)
  Note: on the 8100, 8800 and 8300 models: do not click on the trackball. Instead of this, click on the menu button to the left of the trackball).
  Note: The profile that is in use will tell: (active)

  5. you will now see a list of all applications that can have an assigned tone (browser, calendar, level 1 Messages, Messages ([email protected]), Messenger, MMS, phone, SMS, job ect..)

  6. Select the application you want to change the tone / in this case, notification Messages, or your specific e-mail address

  7. you can now edit the tones of the case and Holster / notifications.
  (a) select between: none, Tone, vibrate, vibrate + tone
  (b) select the range that you want to use
  (c) Select Volume (the options are mute, low, medium, high, climbing)
  (d) to select the number of beeps (the options are 1, 2, 3)
  (e) select Repeat Notification (options are None, flashing LED)
  (f) if value vibrator or vibrate + tone and select number of Vibrations (the options are 1, 2, 3)

  8. repeat a to e for each of the applications set out in number 5 above

• BlackBerry Smartphones flashing led

  How to turn signal flashing led?

  The answer to this depends on what color it flashes.

  If it is red, it's for messages. Go to profile profiles/advanced/active / and change 'Notification to repeat' to none. You will need to do this for each email, sms, mms, telephone, etc...

  If it is green, go to Options/screen & keyboard/light cover and change it to off.

  If you want to disable the blue for bluetooth connection, go to Options, Bluetooth, Menu, OPtions and change LED indicator connection disabled

  Amber is for low battery, either disable or load the BB

  That's all I can think about, but I feel that I'm leaving something... If I did, I'm sure someone will jump in and help.

• What does mean Green Flash when it is placed on the charger

  What does a Green Flash when it is placed on the charger

  Hello

  It confirms that your watch has begun to load.

  The symbol also displayed if you tap the screen while your watch on the charger to indicate that the load is still ongoing.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• What is rooting and flashing

  can someone help me understand what is rooting and flashing phone mean?

  What are the advantages and disadvantages of it?

  and how can these be?

  Root is just access to the base of the system files

  Rooting is a process that gives the Super Administrator/user/permissions so that you can change any file inside your operating system Android

  Flashing is installed on a phone firmware

• What version of adobe flash do I need for my new kindle fire hd?

  What version of adobe flash player I have to update the 32-bit version of Safari on my fire HD Kindle please?

  Adobe no longer provides Flash Player for Android devices.

  See the link for more information on the Kindle fire HD below:

  http://www.Amazon.com/Forum/Kindle?_encoding=UTF8&cdForum=Fx1D7SY3BVSESG&cdThread=TxTR71JR 4GVXQM

• What is happening with Flash Player

  Every website I went like youtube, as said to download the latest version of adobe flash player, which I did like 15 times now and won't always play. I use IE9 and windows 7. Anyone had the same problem and was able to get it fixed. I really need to get it fixed for the school. I don't like not all other browsers, so I'm hoping to get it repaired for IE9. The only other alternative is of adobe is at the origin of the problems on purpose and they are right to want us to pay $ 39 to talk to someone who cannot be repaired.

  Please follow the instructions in the frequently asked questions of the following two:

  Allowing Flash Player in Internet Explorer 9

  ActiveX filtering in Internet Explorer 9

  Those usually help to fix people up.

  Chris

• is it possible to know what browser in which flash is played using AS3?

  Hi all, I need to get the information from broswer dynamically

  is it possible to know what browser in which flash is played using AS3?

  JavaScript can detect the browser and flash can communicate with javascript using the externalinterface class.

• Tecra M9 - will not power on and flashing LED

  Can someone tell me where I can find a list of what means the various sequences of flashing of LED on a Tecra M9?

  I have one that will not be running at all and the power light flashes a particular model of amber.

  Toshiba Tecra M9
  PTM91E-04R03TEN

  Hello

  I think that such a list of error codes for the LEDs are not available. I've never seen such lists on the Toshiba site, I guess they are no longer available to the authorized service provider.

  But you can try this: remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start the laptop.

  If it doesn t work an ASP needs to ask for help. They can give you professional help and fix it.

• HP Pavilion dv5z-1200 will not start, flashing LEDs

  LEDs keep blinking once every 4-5 seconds, computer does not start even in the BIOS.  Out of warranty.  The table shows the CPU is not functional.  After the hard reset several times, after the failure of the CMOS, I reinstalled the memory modules, nothing helps.  I opened the darn thing, reinstall the CPU, cleaned the existing thermal paste and replaced with a high thermal conductivity, one and clean thermal gel pads ugly that supposedly provide a cooling the GPU.  All this for nothing.

  Should I assume by now that the CPU is fried, or is there a chance to distance the BIOS EPROM chip is toast and cause all this?  Someone has experience in this sense, is the flashing model good to locate the faulty component?  All ready to offer their advice Jan 11-12 HP Expert?  I replaced a BIOS chip in an another HP Pavilion of last spring, so it wouldn't be a problem.  Don't want to invest all efforts - and paste - for nothing.

  In any case, this is / was my last HP laptop ever.  Between a ze4547 and this dv5z, I got so of many hardware problems, I prefer to buy netbooks cheap every two years than spend a zillion things expensive, shiny, flashy with abject genius inside.

  Thanks in advance to anyone!

  Taking up this issue and reported a permanent fix (i.e., more than 5 months).  Yet once, the defect could not solder in the graphics chip ATI Radeon (Northbridge).

  Chip HP ships this with a simple gel pad main Board between the radiator and the graphics, which after > 1 year of running hot develops inclusions of air and turns of conductor of heat a heat insulator.  Due to the high temperature resistance, brazing under the chip will slowly oxidize anr / or crystallize and develop cracks and inclusions of oxide.  The only solution in addition to buying a new card of mother is reinvest with a heat gun, or using a special station of redistribution and the improvement of heat transfer to the heatsink.

  Here's what the complete repair consists of:

  -Disassemble the laptop according to the instructions in the maintenance manual; Make sure that keep track of where each screw came from

  -Remove the heat sink fan and clean the end inside of the metal fins (simply by blowing canned air will not work)

  -cut a ~ 1 mm of thickness copper thick to the exact dimensions of the cushion gel covering the ATI Radeon chip and ensure its two surfaces are clear of any oxide

  -Clean the CPU and the Radeon perfectly cooling surfaces using 92% isopropyl alcohol; in a similar way to wipe the corresponding surfaces of the shiny heatsink

  -dissolve welding flow or Rosin in a few mL of 92% + isopropanol

  -pour a few drops of this solution of rosin under the chip Radeon on all 4 sides; Rosin ensures that reinvest the chip will recreate connections free of oxide with the main card; use a pipette or a pair of tweezers for this and not to spill the solution outside the area of interest

  -make a mask cardboard lined with aluminum for the entire main Board having a place of opening in the Center exactly as big as the Radeon chip; Make sure that the coating of aluminum foil extends to the lower part of the mask through the operning square to protect the card against high temperatures. use this youtube video as a guide (minute 06:50)

  -heat gun to regular heat on 'Medium' (or 'Low' if only two power settings); taking the mask in place immediately on top of the Radeon chip using a tool metal long (so you do not burn your fingers), slowly heat by lowering the gun hot air for the duration of a minute

  -maintain the hot graphics chip for about 30 seconds into the air gun hot about 1-2 inches above the chip. Make sure that the mask with double foil is aligned with the chip to avoid burning its below or other components of the motherboard; consider wearing a thermal glove or leather on the hand that holds the mask down with this tool metal long

  -slowly raise the heat gun on the time of ~ 30 seconds and then remove the mask and let the chip and the main map to cool for about 1-2 minutes

  -It is best to test repair before reassembly of the computer; to do this, connect the power button, display, cooling fan, a single chip of RAM and a charged battery to the main card and turn on the laptop the bone bare; See the HP logo on the screen for a success to reinvest

  -use of money from high-quality thermal compound (for example, Arctic Silver 5) and coat the surfaces of cooling of the CPU and Radeon chip, as well as the corresponding surfaces on the heatsink of heat and the puck in copper, with one layer, thin and uniform; Wipe all spilled; Place the wedge of copper on the graphics chip and carefully assemble the heat sink; don't forget to plug the fan on the main card

  -Finally, back up the phone by following the steps for disassembly in reverse order; do not mix the screws, like using a long screw where it was not may cause a short circuit or cracks in the main map

  -Use of SpeedFan to monitor the performance of you cooling system in the processor; periodically blow out or spend vacuuming of dust between the cooling fins.

  Good luck to lovers!

• Satellite Pro 6100 will not turn on - flashing LED

  Hello

  I have a probelem big, my Toshiba Satellite Pro 6100 lights so I decided to buy a new motherboard @ ebay.

  I have to build in and all I get is an orange error code. So I decide to make me buy a testet PCB (Powerboard) on Ebay, then the same thing! Then I bought a second Geforce but the same error code! So I all exchanged but the processor and I'm ascendant to buy a second to test or do you know Whata´s evil?
  I don't think that the new parts are broken!

  The error, the code of the orange Led is 01000011 or short, long, short, short, short, short, long, long and I did not see what maybe the problem!

  Sorry for my broken English I come from Germany!
  Hope for answers and greetings

  problemman

  Hello

  How do you know what the flashing of led said you? You are a sort of technician? How can you know that the "blink" (long, short) are 0 and 1.
  Do you know how to assemble the circuit board and don't you know that the things you have take care? Who PCB´s that you have exchanged?
  You said:

  Hand and VGA

  but the powerpcb too? And how do you know that the PCB´s are ok? Because why someone is selling you that with the 'work' of description?

  Would appreciate some feedback from you

  Welcome them

• Satellite Pro L300 starts flashing led no-battery

  Hello world

  My Satellite Pro L300 stopped working suddenly: nothing terrible happened, such as fall or other accident, so I can't explain what went wrong.

  The situation is: I have the laptop with the battery inside and connected to the power cable. I press the power button and battery led 5 times with the orange light just flashes. It doesen't start, not even the fan, just stay still. Same thing if I disconnect the power cable.

  If I remove the battery it doesn't blink even led orange.

  Does anyone know what could have happened?

  Thank you very much and sorry for my bad English!

  Silvia

  Hello Silvia

  I can't say for sure, but power led flashing is typical when there is a problem with power supply and electronic power supply.

  If you cannot start the laptop with AC power only (remove battery) then you need professional help with this.
  Sorry, but I m afraid there is nothing you can do about it.

• What is the Toshiba Flash Cards / KeNotify Application controls?

  Hey,.

  I did some research and it seems that both KeNotify.exe (Toshiba/Utilities) and TCrdMain.exe (Toshiba/Flashcards) are responsible for managing the Fn keys.

  Could someone please explain what each did separately, and what features will loose if I remove them from the start?

  Thank you very much!

  Hello

  To my knowledge, maps Flash (visual FN button row at the top of the screen) is displayed if one of the FN + F1 - F9 key combination would be in a hurry.
  If you delete these two tools, I guess this Visual menu seems no more and you will lose the functionality of the FN button.

  But you can test it just to test offers without deleting the two entries.
  Search type msconfig. In msconfig, choose the Startup tab and uncheck here two exe files. Save the changes and restart the device.

  If you want to retrieve these processes, go back to the Startup tab and activate the two process once more.

• T420s no power, flashing Led power - does not start

  My 2 month old T420s refuses to boot from this morning.

  After pressing the power button, it starts flashing Alternatively the light of the power button and the LED fingerprint reader.

  Nothing else happens, no fan starts to run, or anything else.

  I have not changed anything since yesterday when it is started without any problems.

  Anyone know what this could be?