Satellite Pro 6100 will not turn on - flashing LED

Similar Questions

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite Pro 6100 does not start - power light flashes

  Hello

  I have a Satellite Pro 6100 when I press the power button and HDD lights up briefly then powerlight blinks.
  It seems to Flash a pattern: on (2 sec) flashes (2 seconds) then off (about 8 times)

  What he told me? No fan, no display no hardrive is active.
  Food is ok because it load battery.
  I bought it as it would be something easy to fix ideas?

  Hello

  It sounds bad
  Generally, the power led will blink due to a malfunction of the equipment.
  The LED provides a microcode and only the technician can read this code.
  A common user is not able to read.

  Maybe you'll be able to read this code, but you won't find any description about the meaning of the code.
  I recommend you contact the technician in your country

  But try this:
  Remove the battery and unplug the AC adapter.
  Wait severla times and then plug in the battery and plug in the AC adapter.
  If this does not help, you have aks, a complementary technician...

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• Satellite Pro L300 will not start

  I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

  Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

  Can anyone help.

  It s certainly nothing wrong with a RTC battery (as you said internal battery).
  The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
  But I guess that this isn't a problem.

  The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
  This should be the first step, since the RAM modules are easy to replace.

  All other parts should be checked by the type of service.

• Satellite Pro A120 does not turn on - blinking green

  Hi people anyone can help?

  I have a Satellite Pro A120, which is not used for a long time,
  When I plug in and turn on I get nothing except the lights on the front of the laptop, green power telling me light the d/c plug is plugged in,
  loading light but the power of the light on the front of the battery flashes green twice, then amber once and the fan runs but nothing else at all.

  Could someone tell me wots wrong and how to fix it please?

  Hello

  Indicator of DC IN ((deuxieme left) lights green when the power adapter DC voltage.
  If the adapters output voltage is abnormal or if power outages, this indicator flashes orange.

  ((Troisième de gauche), the power led lights green when the computer is turned on. If you select the "sleep mode" indicator flashes (a second to two seconds) while the computer shuts down.

  If you notice other behaviors of indicator, then it means that something might be wrong on the motherboard. It is not possible to say what could be the problem here, but first, you should check out the bars of memory. Try to turn on the device using a single module.
  If this is not enough, then a malfunction of the motherboard would be possible.

• Satellite Pro A100 will not start!

  Hello

  I am having trouble with a Tosh. Satellite Pro A100 (model: PSAACE).

  The laptop was acting kinda funny for the last week (turned off on its own, saying that it is running on battery when pluged) then today he has decided to power off on it's own and does not restart.

  Having checked it of get out the power supply, have tried with and without the etcetc... This battery with no luck...

  When I press the power button the only thing that happens is the symble of battery next to her light flashed orange 11 times (same lengtht flashed
  SS each time).

  Can anyone shed light on what is wrong with it? Or what this error on the battery light code is trying to say?

  See you soon

  Matt

  Hello

  > When I press the power button, the only thing that happens is light with the symbol of the pile beside it flashed orange 11 times (same length flashes each time).

  Hmm I think that it s a hardware problem. I would say that this s a motherboard problem.
  Is the motherboard provides and flashing, error code.
  This only happens if a serious hardware problem has been detected

  Unfortunately, only the ASP can read this code and may know what this code means but certainly must be a hardware problem.

  In this case an ASP is your last resort.

  Good luck

• Satellite Pro P875 will not display on '3D ready' 3D projector emachines V700

  Hello

  I am struggling with the display of 3D on a 3d ready projector emachines V700.
  I tried different software, stereoscopic player, CyberLink DVDPlayer 12 without success.

  CyberLink DVDPlayer is configured to use the Intel card - which will not limit its possibilities to use the 3D Vision NVidea support?

  On the NVidea Control Panel, the option for the specification of the graphics card is grayed out and configured for the use of the Intel card, for all CyberLink programs.

  The error message I see, is that the software can not enable 3D support. I used the mode "120 time sequential 3D LCD.

  The Toshiba Bue Ray Player has yet identified the Blu Ray in 3D, as it seems.
  It shows 3D blu ray than 2D and 3D button is grayed out.

  I have:
  Toshiba Satellite Pro P875
  HDMI cable
  EMachines V700
  Shutter 3D glasses: Hi Pro shock

  Hello

  From my point of view, you can use this capable 3D projector as part of the nVidia 3D vision.

  http://www.nvidia.co.UK/object/3D-vision-main-UK.html

  As I m not wrong not the display/projector must support 120 Hz and must be set to 120 Hz in order to use the 3D side-by-side mode.

  In addition you need a compatible software/player stereo standard (for example 3D VISION video player)

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• My new Satellite Pro L300 will not work

  I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

  After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

  I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
  Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

  What should I do? How should I do?

  At first, I must say that F12 has nothing to do with all the settings.
  At this point, I recommend using the new operating system installation using the HDD recovery procedure.
  How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.

• Satellite Pro L500 will not start on battery only

  Hello!

  I recently bought a Satellite Pro L500 and have the following problems.
  My laptop does not start on battery only. The Green led comes on and stays with the laptop in a gel (nothing appears on the screen).
  The only way to get this light off is to remove the battery.

  Starts EVERY time with AC power connected (with or without battery)-normal lights are displayed when connected.
  Works quite normal, once started - with or without power connected

  SOMETIMES starts with the battery only if I boot in a short time after I've used the laptop
  I tried the static release process but does not work. (hold button power supply without battery or power supply connected etc..)

  After having this problem, I've updated to the latest version of the BIOS but nothing helped
  Tried a different battery and did not help
  Is a Toshiba Satellite PRO L500 T4400 4GB 15 "laptop Win7 - only 3 weeks or so old

  Very annoying!
  Please anyone with a solution?

  Hello

  Try this.
  Remove the battery, disconnect the adapter and then wait a while. I would like to leave it disconnected for about 12 hours.
  Together the two parties again, charge the battery and then remove the power adapter.
  Then try to turn on the unit using only the battery.

  If that does not help, then you should get in touch with your ASP as fast as possible since the guarantee is valid and would cover all the checks of the equipment and replacements.

• Satellite Pro L10 will not start - the LED blinks

  I have a pro l10 phone which, after sutting down as battery not return to life. All I get is 8 flashes on battery led when the button is pressed. It's the same area only, battery only or both.

  It sounds bad
  Generally, the laptop LED flashes as there might be a hardware malfunction.
  The LED provide a microcode and the technician can read this code.
  A common user is not able to read. OK maybe you can read it, but you will not find any description about the meaning of the code.
  That is why it s a good idea to contact the technician in your country

  But as a first step, try this:
  Remove the battery and unplug the AC adapter.
  Wait 20 - 30 minutes and then plug in the battery and plug in the AC adapter.

• Satellite PRO U300 does not turn off

  Hello

  I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

  The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

  Some details of my pc are as under:

  Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
  BIOS Version V2.00
  Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

  Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
  Thank you

  JITENDRA

  Hello

  I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

  Power on / off LED is probably what you mean (the other starting on the left).
  Anyway, you turn off your laptop using a standard on the Start button?
  Are you sure you want to use the Hibernate mode.

  Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

  Have you installed something 4 days ago? Or deleted some important application?
  Sorry, but it is not easy to say with certainty what the problem is here.

• Satellite Pro 4340DVD will not initialize - pci.sys missing or corrupted

  I bought a Toshiba laptop Satellite Pro 4340DVD model # PS434C-3N152, Serial # Y0018185J, off E - Bay.
  The original operating system, Win 98SE has been upgraded to Win XP Pro. No disc don't came with the laptop.
  The laptop crashed yesterday while I was online and will not initialize to top.

  _Error message reads: _
  + The following file is missing or corrupt: System32\DRIVERS\pci.sys.+

  Any suggestions on how to fix this problem would be highly appreciated. I would love to have a manual for this camera, but have not been able to find one.

  Thank you!
  Sam

  Good news!

• Satellite Pro L300 will not start - cannot get into the BIOS

  Dear,

  I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

  Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
  In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

  Help, please.

  > stop boot on Toshiba logo process
  This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

  Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
  It is possible that one of the RAM modules is defective

  It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure