What would be a 4 min HD video?

Hello;

I made a video in AE, who mainly use .mov as assets (cinema4d renders). the c4d and ae are defined in 1280 x 720.

When I went out AE, I get a 11 GB file, .avi.

I wonder what would be a reasonable target for my 4 min hd .avi size.

Thank you

Shannon

The size is okay as long as the data rate is something the screen can swallow. AVI is just a container, what matetrs is the CoDec used inside. In any case, I would consider it a moot point. Based on your description you use DivX or H.264 probably since it's what decoder of these chips are made and you very well without problem once you realize that. All what matters is to balance the quality compared to a rate of data appropriate, then in turn the file size and for all intentions and purposes, which could be about 20 MB only, even at full resolution HD Basicalyl you would simply take your existing AVI and Matadi via Adobe Media Encoder using a preset. most of them by default for 6-8 Mbps, which is fine for most tasks, but don't hesitate to go higher. Just keep in mind that there may be a limit frequency of data in the chip decoder in the TV itself, so don't worry too much and maybe look for specifications on this...

Mylenium

Tags: After Effects

Similar Questions

  • Hello. I have a 57 min mts video I would like to cut in several short videos. simple, no doubt. How can I split this video into sections?

    Hello. I have a 57 min mts video I would like to cut in several short videos. simple, no doubt. How can I split this video into sections?

    Press F1 and type of subitems.

  • Need a fix of small budget for a HDMI port on my OPTIPLEX GX 620 2006 do not know what would be a good choice?

    I have a 2006 name Dell OPTIPLEX GX620 (Mini lathe) CPU Intel (r) Pentium (r) 4 CPU 3.00 GHz CPU - 1 base - 2 wire frequency 2992.32 MHz 1 thread (15 * 199,49 MHz) current multiplier: 15 / Min: 14 / Max: 15 Architecture Prescott / N0-Step (90nm) Cpuid / Ext.F.4.3 / F.4 AI Extensions MMX, SSE, SSE2, SSE3, EM64T covers L1D: 16 k / L2: 2048 KB Caches Assoc.L1D : 8 way / L2: 8-way of the firmware Rev 0 x 000005 Vcore Volts Type Retail 1.42 (Original frequency: 3000 MHz)

    Model card mother Dell 0HH807 Socket Socket 775 LGA North Bridge
    Rev of Intel i945P/PL/G/GZ A2 South Bridge Intel 82801 GB (ICH7/R) rev A1 BIOS Dell Inc. A11 (30/11/2006)

    (Vivid RAM) memory, Total size 1536 MB Type Dual Channel (128 bit) DDR2-SDRAM frequency
    266 MHz - report 3:4 Timings 4-4-4-11-15 (TCAS/ACAS-tRC-tRP-tRAS-tCS) Slot #1 Module Samsung 512 MB (DDR2-537) Slot #2 Module MOSEL 256 MB (DDR2-537) Slot #3 Module Samsung 512 MB (DDR2-537) Slot #4 Module MOSEL 256 MB (DDR2-537)
    GPU Type #1 Intel 82852/82855 M/GME graphics card
    GPU #1 brand VRAM 0 x 1028 (0x01AD) Type #1 224 MB of memory GPU Type #2 Intel (r) 82945 G Express Chipset Family #2 brand VRAM GPU 0 x 1028 Type #2 224 MB DirectX 9 .0c (0x01AD).

    Storage capacity (HARD/SSD drive) model #1 HDS728080PLA380 #1 80 GB. Microsoft Windows XP Edition family Windows cerent. Service Pack 3 (Build 2600.

    I recently installed a D-Link Gigabit Desktop PCI Adapter Model No. map: DGE-530 t in one of the slots at the back of the tower with the top slot white which allows me to use the Ethernet port for my unique WiFi ARRIS router. Which increased my download speed in Mbit/s from 28 to 34 to 48-55.

    I would like to connect my computer to my flat screen Sharp HDMI port. I want to use a HTPC using XBMC. I have a Digixstream 2.4 GHz/5.8 GHz Dual Band WiFi DLA for the flat screen. (1) suggestion is to buy a Mini ONE $ 50.00 Rii keyboard real i28. First Mini keyboard, Airmouse, Touchpad of the world, chat Audio all in a Multi - Media Remote Control and Touchpad keyboard Pocket functions for Android TV boxes. (2) I thought that if I install a new card with a HDMI port I could connect the two directly, not sure what would enter the tower and be compatible at this point. Any suggestions to improve this system for low cost would be greatly appreciated. Thank you Will...

    More info on: budget fix hdmi port 2006 optiplex 620 good fit

    The Asus EAH5450 Silent or EAH6450 is the recommended model.

    ASUS Silent HD6450.  Fits all models EXCEPT USFF because USFF has no slots.

    http://www.Newegg.com/product/product.aspx?item=N82E16814121439

    There are drivers for the GX620 and many other models that had the designed for XP Vista Capable Logo Vista.

    Video ASUS Silent Radeon 5450 is usable on all models EXCEPT the USFF GX620 that has no slots.

    cs_setInnerHtml ('video_0752a05c-a671-4016-b435-70eba216c625', ");

    For WIN7 WIN8 or WIN8.1 drivers audio 32 and 64 bit WHQL certified Versions.

    DirectX June 2010 is also highly recommended.

    Download DirectX Redist (June 2010) of official Microsoft ...

    Download the file, extract to a folder, RUN DXSETUP. EXE as administrator.

    The codec has Analog Devices AD198X catalog of Microsoft WHQL drivers.

    Architecture: X 86
    Classification: drivers
    Products supported: Windows 7, Windows 8
    Supported languages: all
    Company: Analog Devices
    Driver manufacturer: Analog Devices, Inc.
    Class driver: Sound
    Driver model: SoundMAX Integrated Digital Audio
    Driver provider: Analog Devices
    Version: 5.12.1.7010
    Version Date: 31/10/2006

    More information:

    Company: Analog Devices
    Driver manufacturer: Analog Devices, Inc.
    Class driver: Sound
    Driver model: SoundMAX Integrated Digital Audio
    Driver provider: Analog Devices
    Version: 5.12.2.7010
    Version Date: 19/10/2006

    Catalog of Microsoft Analog Devices 5.12.1.7010 32 BIT

    catalog.update.microsoft.com/.../ScopedViewRedirect.aspx

    Catalog of Microsoft Analog Devices 5.12.2.7010 64-BIT

    catalog.update.microsoft.com/.../ScopedViewRedirect.aspx

    PCI\VEN_8086 & dev_266e & subsys_01a11028
    PCI\VEN_8086 & dev_24d5 & subsys_01761028
    PCI\VEN_8086 & dev_27de & subsys_01bc1028
    PCI\VEN_8086 & dev_24d5 & subsys_01741028
    PCI\VEN_8086 & dev_24d5 & subsys_01681028
    PCI\VEN_8086 & dev_24d5 & subsys_01561028
    PCI\VEN_8086 & dev_266e & subsys_01791028
    PCI\VEN_8086 & dev_24d5 & subsys_03021028
    PCI\VEN_8086 & dev_24d5 & subsys_019d1028
    PCI\VEN_8086 & dev_27de & subsys_01ad1028
    PCI\VEN_8086 & dev_266e & subsys_01811028
    PCI\VEN_8086 & dev_24d5 & subsys_01621028
    PCI\VEN_8086 & dev_266e & subsys_01901028
    PCI\VEN_8086 & dev_266e & subsys_01991028
    PCI\VEN_8086 & dev_266e & subsys_01771028
    PCI\VEN_8086 & dev_24d5 & subsys_01691028
    PCI\VEN_8086 & dev_24d5 & subsys_01511028
    PCI\VEN_8086 & dev_24d5 & subsys_01d51028
    PCI\VEN_8086 & dev_24d5 & subsys_01571028
    PCI\VEN_8086 & dev_266e & subsys_017b1028
    PCI\VEN_8086 & dev_24d5 & subsys_017a1028
    PCI\VEN_8086 & dev_266e & subsys_01751028
    PCI\VEN_8086 & dev_266e & subsys_01781028
    PCI\VEN_8086 & dev_24d5 & subsys_01541028
    PCI\VEN_8086 & dev_24d5 & subsys_01551028

    ID update taken in charge

    03ae3b46-f06f-4f4f-b76a-4c960993b94c
    06362563-621C-4630-87AA-1213f176df1f
    0cf8bc26-892F-42FC-8757-a2dd83738b4a
    11c08435-a2d1-4463-b5b9-43376f56de76
    14b19087-24fb-4a67-BdeF-00045f0c5c8a
    1958c05a-2a61-4ACC-bed9-cfa612946126
    1e4ec816-D9F6-44B4-af7f-e3f12e395466
    1f85a63a-592b-4929-AB13-404a36f8eb4f
    285f6780-Afaf-4ad6-b9af-64c0ef376a4d
    33065cca-C120-430D-b764-5ece296e6a5e
    3d594402-0ce5-4E3F-8CB7-4d41fa14e17a
    4016e98b-38d6-45dc-aa96-e5c6c4b8afa5
    41fc584a-ba80-4eea-960a-f33ff764f2d7
    53899004-F959-4E14-9F10-8a0f0c0914ba
    542a4956-c6e3-4279-A19B-00c55045a949
    584ec490-D422-42c6-a71c-f1c9967953b7
    6864f06b-1677-41bb-BE75-1aba02a61dd0
    6c81fed7-57a9-4d9e-B239-2f8679b43cae
    723320af-da7b-4217-a0ac-b047612382a0
    7f98d187-ABC6-40CC-bb47-0d89c690c89f
    89886cd9-dbd2-49Cf-9d81-41dfd2e3c4e5
    bf0b1225-20cf-4be7-a0f6-d854183780f1
    c3eb318a-fe4f-4E0C-8ef9-56a56e2cac48
    c8cf0039-d33e-4bc4-991A-f9e1363d4660
    cf699d9c-8ea7-4b14-b5df-29ee34d023b0
     
  • IM using Windows XP Profesional, can I upgrade to Windows 7 and what would be the cost?

    upgrade windows xp to windows 7

    IM using windows xp profesional can I upgrade to windows 7 and what would be the cost? what I have to put all my files on an external drive then uninstall windows xp then put in windows 7 then put back my files? is that how its done? Thank you.

    First the cost, you must know if your hardware can support Windows 7

    In General win 7 should a minimum og 1 gig of ram (for 32 bit) or 2 for 64-bit, and it needs a video card 256 MB or greater.

    If your less and can not be updated it may be best to start thinking about a new computer.

    If the above is ok there are various offers for win 8, but make sure you buy form a reliable site of Ms.  There are a lot of current scams.

    Good luck

  • What happened to Sierra Mac Mini mid-2010?

    What happened to Sierra Mac Mini mid-2010?  As a first step, I realized it was the lower end of the system requirements.  Many citations on the support pages and anywhere on the web say "Mac Mini mid-2010 or newer."  But now, after half a day struggling with the installation, I find that he must now be "mid-2011 or newer!  Changed Whaaaa?

    "Never promise what you can't deliver."

    Mac mini (mid-2010), 2.4 GHz Intel Core 2 Duo, 8 GB of memory, running OS X El Capitan 10.11.6

    Hello

    It is said...

    • Mac mini (mid-2010 or more recent)

    See Configuration hardware Mac here > http://www.apple.com/macos/how-to-upgrade/#hardware-requirements

    You may be looking for feature requirements:

    Instant Rebate Hotspot and universal Clipboard

    Supported by the following Mac models:

    • MacBook (early 2015 or newer)
    • MacBook Pro (2012 or newer)
    • MacBook Air (2012 or newer)
    • Mac mini (2012 or newer)
    • iMac (2012 or newer)
    • Mac Pro (end 2013)
  • What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

    I get multiple research work emails (E/JS) and ecommerce. Some of them have a "Correct".
    'St. Michael Job Assistance Ministry - JAM' FA (SMJAM-JAM).

    For some reason, however, some of the emails from other sources, downloading the verizon pop3, E/JS server are indicated (wrongly) as having the FA SMJAM-JAM above. This situation prevents my email filters to plug these emails to their appropriate mail folder.

    Also, when the steps in order to transmit emails showing incorrect information of FA SMJAM-JAM, the e-mail is no longer present incorrect information of FA SMJAM-JAM but shows rather the correct information of FA that had been specified on the verizon pop3 server.

    address ROM"(FA) in some emails, when downloading from the pop3 server, is replaced by a 'common' 'FA '. [email protected]

    What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

    Hello

    If I understand your problem, I think it may have to do with the addresses stored in your address book. Thunderbird can display the name of your address book instead of the name of the post office, where corresponds to the e-mail address.

    Check your address books to see if you have a bad entry for mail addresses get listed wrong.

    Also check under Tools-> Options-> advanced-> reading & display if you have checked the option to see show it only the names of the people in my address book. If you uncheck this option, the name and the address must be...

  • What would be the optimal OS to install on a 13 "MacBook Pro 2009?  El Capitan can be advanced to install on such an old Mac Book Pro.   Thanks for any input on this!

    What would be the optimal OS to install on a 13 "MacBook Pro 2009?  El Capitan can be advanced to install on such an old Mac Book Pro.   Thanks for any input on this!

    El Capitan is the only one to use, clean the shit of your Mac first and if you have less than 4G of Ram, increase to 4 or more

  • What would cause the mouse to scroll slowly on Web pages, but normally on text documents?

    I have a strange problem. I have a Logitech M305 mouse on another machine which is too slow scrolling on Web pages. I ordered a new mouse, but today I noticed the old mouse normally scroll in text documents, even though the text document is displayed in Firefox (such as the "subject: config" page).

    Normally, a page will scroll 3 lines for each click of the mouse wheel.
    On Web pages, it changes and it takes 3 clicks of the mouse wheel to get the page to scroll.

    It is troubling to move the mouse wheel and don't have anything happen until the third click.

    So the question is, what would make the mouse wheel behave differently on the Web pages and pages of text, and how can I solve this problem?

    BTW, this is a clean install of Windows 7 64-bit. I use the same exact type of install now on another machine with a mouse Logitech M510 and normally scrolls on all pages.

    OK, a final report on this issue. Yesterday, before installing the new mouse M325, I decided to uninstall the Logitech SetPoint software. I wanted a new installation of the software for the mouse to go with the new mouse.

    To my surprise, after the set point has been uninstalled the old mouse M305 scroll normally on pages of text and Web pages. It seems that something mysterious happened in the relationship between Firefox and the original installation of set point. Firefox made some adjustments or updates of its own regarding record just as it does for modules, I saw it happen a couple of times before. /shrug

    New mouse + set works perfectly with FireFox now and the old mouse M305 + setpoint is now works well with an old laptop XP Pro, at least as long as the button pop-up gimpy holds.

    Solution, in this case: uninstall the Logitech SetPoint mouse software, and then reinstall a new copy of it.

  • What would be the cost of replacing and iphone 6s and lcd?

    I accidentally dropped my iphone and when I picked up and the screen comes on he had a line on the screen and as a black liquid under the glass. The screen itself is in perfect condition, no scratches at all, just the part below. What would be the cost of this repair? Thank you

    Check this page for detailed information: Service Response Center - iPhone

    Price of the iPhone Apple - United States service

    Model Screen repair Farm service Maximum fees out of warranty
    iPhone 6 sec more $149 $79 $329

    copied from: iPhone Service - Media Apple pricing

  • A friend offered to sell me his MacBook.  It was new in 2010 or 2011.  I'm not sure of the size of the hard drive is, but it has 16 MB of ram.  Any suggestions on what would be a reasonable price?

    A friend offered to sell me his MacBook.  It was new in 2010 or 2011.  I'm not sure of the size of the hard drive is, but it has 16 MB of RAM.  Any suggestions on what would be a reasonable price?

    This isn't a topic appropriate for the forums. We only used the material price. Visit eBay to find this information.

  • What would make my settings page to freeze on their phone I5s.

    When I open my settings page on my iphone 5s, it is frozen. What would cause this?

    No one here would be able to tell you that.  Like you, we are not deprived to the inner workings of the phone or OS.  Follow the standard steps of troubleshooting... reboot, reset, restore... first of backup, then as new if necessary.

  • where I can download windows 7 and serial key what would you say?

    Hello

    because of the problem of gel, a computer expert suggest me format all the drivers and reinstall the window.

    now I can't take the image backup or windows because of the frost. my pc is not working now.

    where I can download windows 7 and serial key what would you say?

    Please please help me in this regard

    Thank you & best regards

    When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

    You can download a (ISO) image of Windows 7 SP1 by using the links provided in this HP forum thread titled "How to install Windows 7 without the disc". During the installation of Windows 7 you must use the product key of Windows 7 from the Microsoft COA on the underside of your computer. If your computer came with a different operating system, you will need to purchase a copy of Windows 7 with a COA and a key valid unused product.

    Please send BRAVO

  • Hi Folk, I need to buy new 2-3 computers for my new office for architecture. Please enlighten me what would be the best long-term investment, while I can't invest as much. Thank you very much and enjoy the coming days of Advent. Kindly, Siamak

    Hello Folk,

    I need to buy new 2-3 computers for my new Office of architecture.

    Please enlighten me what would be the best long-term investment, so that I can not spend as much.

    Thank you very much and enjoy the coming days of Advent.

    Nicely,

    Siamak

    You need to investigate "in person"... Go to the Apple Store (or a "Apple Shop" located in a section of another bank) > click here > https://locate.apple.com/ch/fr/sales/?pt=4&lat=47.3692907&lon=8.5418192 for locations at or near Zurich

  • Download that takes a man and women face photo and combined see them what would look like a "child"?

    Download that takes a man and women face photo and combined see them what would look like a "child"? Photo and combined see them what would look like a "child"?

    Hello

    I suggest that you try to use the Google or Bing search engines for your question.

    These Forums are to help the poster having problems with Microsoft Products.

    See you soon.

  • What would cause a SQL server to blue screen with FFFFF81001BA5198 code

    What would cause a SQL server to blue screen with FFFFF81001BA5198 code

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

Maybe you are looking for