When I add text and press "enter" it suddenly will not go down a space.
One minute it was fine so I know I must have hit something, but I can't fix it. When I hit enter when adding text does not have a space, he returns to the starting point and on the existing text types. Can someone help me understand how to solve this problem? =)
It seems that your leader is set to a very low value. Change it to 'Auto' for most cases. Where it gets changed depends on which version you use.
Tags: Photoshop
Similar Questions
-
When I write a Web site address and press ENTER, it doesn't fit to the page and I have to press the arrow to go. Also ctrl + enter for the AutoComplete does not work the address of the site. Lately, I noticed this problem in 6 FF. I expect the upgrade to 4 FF will solve this problem, but he persists.
Thank youThis may be due to a problem with an add-on. To find out how to solve this to find out what is causing the problem, see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
-
Satellite A350: Highlight text, and then delete or BACKSPACE will not erase the text
I have a new Satellite A350. When I surligner highlight the text, then try to remove or back up it will not delete the text. This happens in the line URL, Windows Mail and Word.
The key SUPPR and button both work individually, but I'm used to being able to select lines of text, and then type on (or pressing delelte) it to disappear.
Now I can not delete text except by backspacing of the text.
Y at - it a setting I can change or is this a problem with the laptop?Thank you
Hmm, I had the same problem in Word from MS Office.
I solved this problem by using this work around:-In the menu bar, select Tools, Options and then on the Edit tab.
-Click the box called "Typing replaces selection" sub + mounting options + and then click OK.Check if that helps.
-
I can type in the full web addresses, keywords, click on the drop sites, but no matter what, nothing to do with happen when I hit "enter". I read an article that said to type in everything: config in the address bar to access some options, but when I type which in and press ENTER, nothing happens. I like Firefox, but I can't go anywhere unless I use my search of google on the side toolbar or if it's a bookmark.
Can you post the bad add-on so others know?
-
When I select text and right-click on it and looking for it, the new tab open and switched to immediately. I don't want that. Instead, I want to stay on the page that I am and don't want new tab to switch immediately.
Hi Obaid.Farooq, please try the following:
enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.search.context.loadInBackground. Double-click it and change its value to true. -
I recently had a question on my toolbar menu and begin to disappear. While I was trying a number of different ideas through forums, I myself in another problem. Now my computer boots but windows never start I just get a screen saying: "FAILURE of STARTUP DISK, INSERT the DISK AND press ENTER. It worries me because my computer never came with a CD-ROM it was all preloaded when I bought. Can anyone help, thanks
Home premium Windows Vista, 64-bit operating system
Hello
Here are the different ways to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
____________________________________________________________
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
__________________________________________________________
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
____________________________________________________________
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Default system disk insert boot disk and press enter
A few days I have installed additional return 2 GB ddr2 ram on my pc and a graphics card. My c: drive had only 700MB left. Then I turned off my PC. The next day, when I turn on my pc it shows the disk boot failure insert system disk and press ENTER. Then I tried to install windows 7 but it was impossible to install in this partition, this partition is type GPT. Then I used the command cmd and diskpart. Then I was able to install it. But then I tried to convert my GPT HARD drive using partition AOMEI converter. After that my pc restarts and again show the same command disk boot failure. Again, I have install windows 7 using cmd. Now, my pc works ok but it is quit slow. So what do I do now to solve this problem. And it will do no harm to my pc?
Hello
We are here to help solve your problem with Windows 7. While they inspected THAT TPG will work with a later version of Windows, i.e. Windows 8-10. You can see the last part of this link for more information.
Let us know how it goes.
Kind regards.
-
When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix it?
You set the font size to a size that is suitable for the size of the document. Size of the document may vary everywhere. To resolve this problem in action, I solved in scaling the document to a known size then use a font suitable for a document of this size. When you resize an image using size with resample Images not only checked a single pixel is change everything that is changed is the DPI image resolution setting. So if you size a picture 8 "wide you choose a font size is good for wide image 8" the Save action. To work around the problem of changing the size of the printing I wrote a Script to use in such an action. The script is used twice, there is a backup and restore script. The first time that the script is used the script records the resolution DPI images in the metadata documents. The second time that the script is executed, it retrieves the registered PID parameter deletes the record of metadata from images and set the DPI images that had been saved. If the use of fonts for the document 8 "will be resized to fit the print original size.
In a script, you can calculate a correct font size to use. Actions cannot retrieve information or use logic. They need to use the Plug-ing and Script where logic is needed. When you make using Photoshop UI you use your eyes and brain.
Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
Contains- Action Actions Palette Tips.txt
- Action creating Guidelines.txt
- Action dealing with Image Size.txt
- Strengthened through scripts functions.txt Photoshop action
- CraftedActions.atn sample Action set includes an example of Watermarking action
- Sample Photoshop Actions.txt CraftedActions the value stored in a text file.
- More then a dozen Scripts for actions
-
I'm having some trouble with 13 elements. One is that, in mode 'play', the sound stops just happening. I have to click 'pause' and then 'go' again and the sound returns. It stops also play on its own, I have to hit 'play' on several occasions. Just got the software, used intensively for a week or two and it just started happening.dor
Today, when I add text to a clip, it deletes now on "Auto color" so that the text is visible in the clip, then automatic color when the text is missing. Any suggestiosn?
nikovichb
If we look at the same thing, you called the attention a strange first elements 13 titration AutoColor/module interaction. This can be reproduced to the Expert or
fast working space. I will be this demo within work fast since it's where you worked.
1. import a still in fast work/film space.
2. with the still selected, go in Panel of Palette/Color tab/settings setting expanded and just click the close the route of the tab Auto color tab adjust.
3. go into Menu/New text/default text to open the module of titration of the project. When you do this, you see the following and not the still on which the text title must go.
And when you close the titration module, you will see the title of text "Add text" in nature.
The only solution I can think of right now is to create the title of text and then apply the Auto color to the still.
It is interesting that this happens only with the color of the car in the color Panel. If you do not click
Color Panel and to use more options for color adjustments, this behavior does not occur.
Deleting the Adobe Premiere elements Prefs file does not correct this situation.
Regarding
I'm having some trouble with 13 elements. One is that, in mode 'play', the sound stops just happening. I have to click 'pause' and then 'go' again and the sound returns. It stops also play on its own, I have to hit 'play' on several occasions. Just got the software, used intensively for a week or two and it just started happening.dor
I think that here we have to explore the parameters of the project (presets), rendered the source and chronology of media properties and non-rendusent contained prior to export.
Please read the foregoing
a. check if the Auto title text color glitch I've seen what you describe in your situation
b. give the details of your project so that we can explore cause and effect for irregularities in reading content of chronology, as seen in the edit box monitor.
Thank you.
RTA
-
Before that I only had to type "IMDb" and press enter and put me to the site immediately, but now all these links come first.
Or I used to type 'youtube' and after knocking entered, I was took directly to the homepage of youtube.
What can I do to make it like it was before, so it takes me directly to the site? Second, my Norton passwords and user names for all sites that have been stored in my 'Norton safe"does not appear in the browser. This will be available soon?
Try to define your topic: config entries for:
- Keyword.Enabled - > true
- Browser.Fixup.Alternate.Enabled-> true
- Browser.Fixup.Alternate.prefix-> www.
- Browser.Fixup.Alternate.suffix-> .com
and then restart your browser and try again supernatural imdb.
You must use 'supernatural imdb' rather than "supernatural imdb" because you want the domain before the page for research work best.
-
When I highlight text and right click for the yahoo search gives me. I prefer google. How do I change this setting?
Research in the context menu will change depending on what is on your search bar. See using the search bar in Firefox
-
To the right:
My name is Andrew Wissler. I have a Dell Inspiron 6000 running a 32-bit version of Windows XP Media Center with Windows Service Pack 3. I'm having a problem where if I try to type a name such as my videos in the address bar in my computer and press ENTER, it will not open. Instead, Windows Internet Explorer opens and a Google search results page comes up with the search term in the search box and results are presented. Is it possible that I can enter the term into the address bar and open the folder?
Thank you
Andrew
Hi André,.
This is the default behavior. You will need to type the full path of the folder my videos to open in Windows Explorer. To do this, try the following steps:
a. Click Start, click my computer.
b. in the address bar, type the following and press ENTER: Shared Documents\My videosVisit our Microsoft answers feedback Forum and let us know what you think.
-
Err1err3 Boot failure Insert system disk and press enter
OK lets see if you can crack this for me, it started a week ago for me. If I leave my computer on as usual, he would go on the eve, duh. BUT now it would not start up instead of this I have a black screen and reboot I go to the blue HP screen with four options. Well I have tried for some time and managed to get Vista back up...
Well, after that it started to get really slow and started freezing up during my loadup office. Then, after many hours of scanning and research and reading aid, after a virus scan and even a system restore I couldn't understand the problem and I did what for me was the unthinkable...
A COMPLETE FACTORY RESTORE... I wiped my computer with the possibility of returning to factory install settings. And for a while, that was good, that he has worked again... TIL yesterday I let go to the screen saver and then sleep mode while I was away, and what to do, I see but once more
ERR1ERR3 Boot failure Insert system disk and press enter
so clues as to why this is happening.
PS right now YES I download the bittorrent to vista repair which had been suggested in another thread pray that it will work, but until it's done, I wanted to share this and ask for anyone who might have an idea of what caused it.
Hello
Run the diagnostics and the other utilities that I posted.
---------------------------------------------------------
Starting from your startup disk COMMAND prompt, run these (you can run them in windows, but can be
more efficient prompt startup disk so I will list two meanings).A boot disk command prompt
Chkdsk /f /r
RESET
sfc/scannow
RESET
---------------------------------------------------------
Inside Windows - regular or Safe Mode
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlStart - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228--------------------------------------------------------
Back UP your data NOW!
Good luck.
Rob - bicycle - Mark Twain said it is good.
-
I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?
Hi Pcaubi,
There is no such updates for the same from now.
I suggest you to please put in a feature request to: Photoshop community customer family
Kind regards
Tanuj
-
can the trial version add text and images to video?
can the trial version add text and images to video?
There is no difference between the trial and paid versions.
Maybe you are looking for
-
If I try to search using the address bar need me always to http://search.snap.do. Only search engines, I've linked to the browser firefox are google and twitter. I have macafeee anti virus. I just run a windows anti-malware program, but nothing helpe
-
I can't find all the information about the Satellite A100-599
Hello I can't find information on this laptop Toshiba A100-599Could you tell me where I can find it? Thank you David Usha [Edited by: admin on April 15, 2007 10:59]
-
FFT 1 d 2D spectral data with GPU Analysis Toolkit
Hello world I'm trying to implement a parallel my data 2D fourier transformation using the GPU analysis tool. Given that I've never used this tool, I tried first to implement a simple transformed of Fourier of a simple real signal to an output comple
-
The Acer Iconia One 7 b1-730hd will connect to a hd tv using a micro usb to hdmi adapter mhl?
I was wondering if there is no map available to give it this ability, and if anyone has had any success.
-
Original title: account reminder I am the administrator on my computer and opened a second account for someone and deleted by mistake instead of turn off until their return. How or is there a way to get it back?