When I create any object and select the object I can't resize
Hello
I have a version of the track of the Illustrator, something I problem with my selection tool when I select any object or text I can't resize it there are no show any option for this, happens on the last day. I have reset my Illustrator, but it still has problem. Please give me a solution.
Thank you
umangkansagra,
How about Ctrl / Cmd + Shift + B to switch between showing and hiding the bounding box?
Absence of any (other) cause/cure, try the list:
Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.
The following is a general list of things, try when
(A) the question is not in a specific file,
(B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and
(C) It is not caused by problems with opening a file from external media (see below).
You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.
If possible / there is, you must record a current work first, of course.
(1) close Illy and open again.
(2) restart the computer (you can make up at least 5 times);
(3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);
4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:
https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html
5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);
Even worse, you can:
6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.
http://www.Adobe.com/support/contact/cscleanertool.html
Tags: Illustrator
Similar Questions
-
When I open any image and make rotate the image then saveing the image is going to hiden?
original title: I have Win 7 OS. When I open any image and make rotate the image then saveing the image is going to hiden?
Help me.
Help me.
========================================
It sounds like a problem that was widespread last year...
I saved some info on this, but have no idea if it applies to the
your question.(this is old news and I'm just share it hope only he)
can offer a few ideas):Good luck...
=====
FWIW... the message on the next page
(Posted September 16, 2011 by: Doug Richards,)
SR. Tier III of McAfee Technical Support Engineer)
Indicates that the hotfix is available.Re: File ownership issues cause by mcafee?
https://community.McAfee.com/thread/35820?start=390&TSTART=0= More info =
Could not find photos after their change with Windows Live Photo Gallery
http://windowslivehelp.com/solution.aspx?SolutionID=74910905-ECF1-42d0-b73c-441b1605816aThe files are not missing... they are hidden. Try changing the
next parameter and the photos should reappear.Windows 7 - show hidden files
http://Windows.Microsoft.com/en-us/Windows7/show-hidden-filesWhen the photo thumbs reappear... they can look washed out...
to clear this up... right click on a photo or a group or a
folder and choose... Properties, uncheck the box. 'Hidden '.
Apply / OK.(To restore normal color... right click on a thumbnail or)
a group or folder and choose... Properties...
Uncheck the... ('Hidden' / apply / OK.)The following link can enlighten us:
McAfee - Windows 7 library files are not displayed
http://service.McAfee.com/faqdocument.aspx?ID=TS101228The following discussion indicates that a patch of McAfee
should be available soon.McAfee update messing around with photo editing
https://community.McAfee.com/message/203252?TSTART=0The following link leads to a very long discussion
(almost 300 responses) on the subject to McAfee
Communities site.File property issues cause by mcafee?
https://community.McAfee.com/thread/35820?start=0&TSTART=0 -
Impossible to navigate to and select the menu buttons during playback of DVD on TV
I use DVD Studio Pro 4.2.1 on iMac OS 10.6.8 (using old BONES of FCP 6.0.6).
I have two DVD players for my TV and a Sony DVP-NS57P-GE GE1105P.
For the video I created, I have two buttons on the main menu 1, 'Play' and 'Chapters' which goes to menu 2 with my links 7 chapters. This perfect mode DVDSP simulate all the works by clicking on these buttons, but I can not click on these buttons of menu 1 with one of my remotes for DVD player when viewing on TV. Movies usually have a menu with buttons like play, scenes, etc. that I can navigate to with my remote.
Remote controls work fine, I can use its buttons to move to the previous or next chapter while the video plays and the Sony has a strange menu page of access to the chapters but it would be awkward and should not be necessary. I just want someone to be able to navigate on my menu page 1 and select the link to chapters. Not really concerned about "play" button since someone can click play on the remote control.
So, I apparently need to change a few settings DVDSP. What I'm missing here? Google it and I tried manual DVDSP, but no luck.
Thank you very much.
Jim
No function edit posts, so I have to put this in a response, I guess. This layout of the forum is so bad, was so much better several years ago. It's looking like my post does not get a response for a reason, but in the cases where it does, I need to update.
It seems that I am able to navigate to these buttons, I just couldn't see that because the 'Selected' colors, I put to them do not work. I have all the colors of the selection state set for Normal, selected and active. When I use my DVD in my sell order DVD or mode DVDSP simulate with button style control remotely to this topic, when I browse to the top, bottom, left or right, nothing to change the color of links, so there is no way of knowing when I am on a link (I have 9 on a single page) and you want to select and then press ENTER.
I've hunted throughout the manual, google, YouTube and cannot find the answer to this problem.
-
After that I have enter my serial code # and select the location in which to install Lightroom, I click on install. Windows asks if I want to leave, I say Yes. Then it starts installation but quickly gives a failed Installation display The error summary of files gives me no information. Any ideas?
Thank you, but I thought about it. I have to select "Run as Administrator" on the installer so that it works correctly on Windows 8 Pro. FYI just when it happens again.
-
Get the blue screen when you create a new message or the response message in OWA Exchange 2007
Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)
Hello
I suggest you post the question in the forums and check them off below if it helps:
http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/
It will be useful.
-
Is anyway to create fifth partition and keep the basic hard disk?
Hi, my laptop is g7 1207se Pavilion and the and HP has made 4 partitions (C for windows) and the other 3 for system files and recovery, I want to create a new partition for my files (so I can recover my system without losing them) or install other operating systems, but apparently if I want to create fifth partition I have to convert my hard drive in Dynamics by the practice that I won't be able to boot from any partition but the C, which means no recovery and no other operating system.
Is anyway to create fifth partition and keep the basic hard disk?
Hello
See the excellent guide of Daniel_Potyrala on the link in this regard.
Kind regards
DP - K
-
How to create a document and insert the words and/or art on both sides of the page
How to create a document and insert the words and/or art on both sides of the page
How to create a document and insert the words and/or art on both sides of the page
You create a document by using an application of word processor like Microsoft Word or Corel WordPerfect or OpenOffice Writer. Think of it as a broad a page roll.
When you print the document, you can print all pages of the document on one sheet of paper (the normal default value), or you can print on both sides of a sheet of paper.
Some printers are capable of automatic double-sided printing. With others, you print all the odd pages and then take the stack of paper, turn upside down and put it back into the printer to print all pages. You need either to read your printer manual, or experiment a bit to determine if you need to re - organize the first last pages before printing the second side.
-
File appears not 'supported' when I try to open and put the figure in Photoshop CC.
Hi all, after have exported them to my fuse CC library, the file appears as "Not supported" when I try to open and put the figure in Photoshop CC. Any ideas?
You couldn't be on the version more up-to-date for Photoshop. Fuse support characters was added only in the version of November 30, 2015 of Photoshop. If you have an older version that he cannot understand what is the nature of fuse.
-
I can't open the Lightroom (5.7.1) files in Photoshop CC 2014. When I right click on and select Edit in Photoshop CC 2014, nothing happens. I uninstalled CC 2014 and Lightroom but no change.
All,
Thanks for your help. The only thing that worked was uninstall LR and CC 2014 AND preferences Remove. After you have reinstalled the programs worked well, but I still couldn't edit CC from Lightroom in 2014. After restarting the MAC, many times the function returned. I don't know why, but it works now.
Thanks again.
Ron
-
Manufacturers minimum how will run when we create an object?
Hi friends,
Manufacturers minimum how will run when we create an object?
Thanks in advance.>
Manufacturers minimum how will run when we create an object?
>
You can answer this question yourself by answering this question
>
If you create a new class and don't provide your own constructors constructor how this class has? -
I have a Brother HL2140 printer. When I turn it on and press the go button, all 3 LEDs light up and then begin to Flash. I need help...
The brother of contact support.
-
Hello, I want to make an outline of the text that I created. I started with a blue background. Then, I created a text and changed the color of gold. I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text. I wanted a draft of the text with the picture. Is this possible?
Thank you
Peter
You're welcome, Peter.
-
How can I creat photoshop filters and rendering the form of exe file
Hello.. How are you all, I hope you fine...
I want to know if I can creat photoshop filters and rendering the form of exe file...
and thank you...
If you really want to create a good filter/plugin and distribute it I can only recommend that you try the SDK Forum.
-
I need acrobat pro to open a pdf file I created in quark and reduce the size of the file?
I need acrobat pro to open a pdf file I created in quark and reduce the size of the file?
It may be preferable to use a downsampling image option in Quark during the pdf creation process.
-
Can I create a cursor and set the values by myself
Can I create a cursor and set the values by myself, and it has not been filled by an SQL?
Thanks in advanceYes, you can.
Use variables with a default value or nvl (some_parameter, some_variable) in your cursor WHERE predicate.
They provide an example if it isn't clear, since that's all I can think about reading your post...
Maybe you are looking for
-
HOW can I FIND CE WHO IS MY iPAD VERSION? MODEL MD368LL/A
I would like to connect it to my Apple TV4, but I suspect that it is version 1 hard I can he lead? TIA
-
I need to transfer my contacts and calendar from my iPhone to my new laptop that runs windows and outlook 2016. I have iTunes on the system. I don't know what to do to make the transfer, so I didn't erase anything on the phone. Thank you.
-
Brightness low contrast/min during a turn on Satellite Pro L300
When I turn my laptop on and when the Office lights, the screen is low contrast/mi-luminosite.It stays like that for about 10 seconds, then it flickers and goes to a screen brightness/contrast high. I want to get my screen similar to how it is for th
-
Can Tecra 9100-how I update the graphics card?
Hallo, I have a S3 Graphics Supersavagecard 16.0 MB display memory. It is not enough to play a game. How can I upgrade or buy nested one? Hope you can help me.Thank youFabidou
-
Timestamp of photon arrival times
I would like to make a measure of cross-correlation of two photons. Auto hardware correlators and crossed correlators are available, but expensive. It seems that many other users resulted in the idea of using the 80 or clocks 100 MHz in the counter