When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.
original title: battery problem
To all,
When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.
I unplugged the battery taken power and put it back it, that did not work,
The battery is fully charged and when I check the battery in the control panel for the strength of the battery, the system is telling me, it is fully charged and there is nothing wrong with my battery.
Then I ask why I get this error when I start my computer.
Can anyone help me on how can I do to fix it.
Thank you
Russell Froedge
Hello
Check with support from the manufacturer of their books online and the drivers and their forums system
(as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
problems.
Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
long to load).
In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
systems overload are not a problem.
Here are some tips to help and troubleshoot battery issues.
Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have on line forums.
New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.
I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.
BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.html
Another good program
Vista battery saver - free
http://www.codeplex.com/vistabattery
Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settings
You can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.
============================================================
Try this - to make a Restore Point
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
RESTART which will update the driver stacks.
Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settings
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
I tried to connect to my computer, just one user (Administrator), after installing a servie pack 2 tree VISTA windows update, I rebooted then, when input my password a message says that the user's profile cannot be access.
Then I booted safe mode and was able to connect. I then tried to add a user, but trying to administrator accounts, is locked and can not access it.
Restarted again, but has not been able to log into the user in normal profile.What I can do.
Best regards.
Arsene
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
Profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
two with the same password) use to test or difficulty of the other.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Download file will not be
Why can't get a Blackboard web site file to download on my computer, when I try told me that the file cannot be downloaded and gives a box that asks to restart, or cancelHello
1. what operating system is installed on your computer?
2. which web browser you are using?
3. you get any error message?
4. are you able to download the file using any other computer?
5. do this happen all sites or with any specific Web site?
6. don't you make changes to the computer before the show?
Please follow the steps below.
Method 1:
Follow the steps below.
Step 1:
a. click the Start button.
b. in the start search box, type %temp% , and then on enter.
c. delete all files in the Temp folder.
Step 2:
a. press the Windows key + R
b. in the run, prefetch, type dialog box press ENTER.
c. remove all files
Method 2:
If you are using Internet Explorer, try in no add-on mode.
a. click the Start button.
b. click on all programs.
c. click on Accessories.
d. click on System Tools.
e. click on Internet Explorer (No Add-ons).
Method 3:
Optimize Internet Explorer from the link below.
NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
-
I bought a few years ago a Creative Suite Design Premium and when I want to record my serial number, your services say that the number is not valid. I am surprised because I have used it before on a PC computer that no longer works. I change my computer with a Mac. You can check the number you customer service gave me, L. Fernandes: < num series kglad deleted >. I give you my phone number in Paris: < phone number deleted - kglad >. Best account. Chantal
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html
p.s. This is a public forum. the display of your phone number is a bad idea and display your serial number will get it banned (or used by someone else and will not you).
-
original title: Skype
How to acess, Skype profile to set parameters when crash anotification come tell me that the error cannot run
Hello
The question you posted is more appropriate for support help forums Skype. I suggest you send the same on the following link for assistance:
I hope this helps.
-
Thank you for allowing me to ask my question.
My question is about the message poster on my PC window indicating that the program cannot start because ash.dll base is missing in my PC.
So how I can solve this issue.
This program is for AVAST ANTIVIRUS
Ash.dll is usually associated with an infection.
Install/run these two free utilities
http://www.Microsoft.com/security/scanner/en-us/default.aspx
http://www.Malwarebytes.org/products/malwarebytes_free/
It could also be the case that Avast detected & removed the infection but left a remnent, this being the case closely check the entries in the msconfig Startup tab
-
My computer says ' plugged not supported "I just got a new battery... How can I fix?
Hello
You should really be asking in the forums for your version of Windows. Click on the
Appropriate forum in the Menu bar under the Logo of answers on the upper left on
This or any page.Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows---------------------------------------------------------------------------------------------------------------------
Are you sure that the battery is compatible with your system?
References to Vista also apply to Windows 7.
Check with support from the manufacturer of their books online and the drivers and their forums system
(as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
problems.=================================================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=================================================================
Other information that might help:
Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
long to load).In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
systems overload are not a problem.Here are some tips to help and troubleshoot battery issues.
Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have on line forums.New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.htmlAnother good program
Vista battery saver - free
http://www.codeplex.com/vistabatteryProblems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsYou can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.============================================================
Battery meter: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questionsBattery saver
http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-powerSolutions to common battery problems
http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problemsWhat is the precise the battery meter?
http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter============================================================
Try this - to make a Restore Point
How to create a System Restore Point in Windows 7
http://www.SevenForums.com/tutorials/697-system-restore-point-create.htmlHow to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlThen Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
who will update the driver stacks.Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsI hope this helps.
-
original title: user profile
I can't connect on the profile of the main user, the computer indicates that the profile cannot be loaded. How can I fix?
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?
No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.
-
When I try to install SP1a, I get a message saying that the file is corrupted.
Need help, Im confusedOK, so I have windows XP I am trying to install on my acer aspire 5100. Its an old copy that came with another computer. All I'm trying to do is to clean the computer clean and start over. Installation was successful, but when I try to install SP1a I get a message saying that the file is corrupted. I can't connect to the internet of him because the surrent version doesn't support WPA2. So im downloading on an external HD and try to run it from my computer. When you try to install SP2, it says that the file is not a valid Win32 application. Any help / ideas would be greatly appreciated, thanks in advance!
Again, your best option is to order a set of Acer recovery disks.
If you insist on doing things the way hard, then check first that download, you have to SP2 (you don't need SP1a because it is part of the SP2) is correct - check the hash of the file downloaded against one published (where you downloaded of?)
If the hash is correct and then try running SFC/scannow from a command prompt - it may work, depending on how the software manufacturer set up the drive, but it is preferable to use in conjunction with a good OS disc, rather than the recovery disk.
-
I use Money version 1105, 2004 updated. I have 2 qusstions-
1. in closing down, it saves ok but there is a message saying that the operation cannot be completed. I then use the Task Manager to complete.
2. is there a version of Money that runs this file? I tried Sunset but does not recognize my file.
Any help would be great, thanks in advance
Eric
For any question on any version of Microsoft Money, ask http://social.microsoft.com/Forums/en/money/threads.
Make sure your data and Money backup files are in Documents or another non-protected area, not the default money Program Files or changes and updates will not be saved.
Unless you are in the USA, the version of Money 2005 (released in 2004) 14.0.120.1105 is the latest available. Sunset silver bed only U.S. data files.
Installation file to Money 2005 International English QFE2 (not for USA, Canada, UK) from Microsoft, including stand-alone updates 1105, is available at http://www.microsoft.com/download/en/details.aspx?id=26922
Money 2005 UK - QFE2 (the fixed standalone UK Money 2005 file) can be downloaded from the link to http://www.microsoft.com/download/en/details.aspx?id=26915
-
original title: Disk Image file
While there, I downloaded a disk Image file, and now when I want to delete it, it says that the action cannot be completed because the file is opened in the system. Pls help me remove :)
I discovered what the problem was... :)
-
After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.
[Fixed spelling - Mod]
Go to the folder listed in the path and change the permissions to read/write. Do you know how? It is in the info file.
-
When I try to print two important documents, I first get a little screen that says that the document cannot be printed, then a second small screen that says no pages have been selected.
Hi oldrealist,
Try the following: open Adobe Reader | Change | Preferences
- under Documents, change "Show the documents in PDF/A mode" Never.
- under (enhanced) protection, clear the Safe_mode at startup.
Let me know how it goes.
Kind regards
Nicos
-
When I cut on computer and goto line a radio broad cast lights and I can't seem to stop
WHEN I GO to the LINE... turns on a radio show and I don't know how stop it... even when I disconect to be on the line, it remains onmy computer until I have it reboot
Hello
If you used the previous two answers carefully then these methods should help you find the cause.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
I don't like the list format.
-
Satellite Z830 - 10K - charts using Dynadock U3 error
Dear customer supports,Dear users, The following problem with my Toshiba Satellite Z830 - 10 K. I use a Toshiba Dynadock USB 3.0 to connect to a LG monitor with 1920 px. Graphics works very well here. Also, when I used the ultrabook without the docki
-
Firefox remember its position of the window on my monitors when closing and re-opening.
Before the latest updates firefox remember the position of the window when he was finally stop. Now, it still load upper left full screen on my first monitor.
-
How to create the file .bat for auto archive locally
Hi, can someone guide me on creating a file bat for auto archive locally and a volume mounted, daily for an external HD operating system Windows server 2003 stnd? Thank you
-
I have an AIR application that I'm looking to port to Android with the end of AIR support. One of the options is to convert it into an Android app. I did it and works very well except for one thing - it takes forever too charge - 30 seconds. Is there