When I drag a clip in the timeline audio only appears

Similar Questions

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• When I drag a clip in the timeline, audio does not come with the clip?

  All the sudden Im having a very strange problem this afternoon.  When I open a new project, the first clip I did drag in the timeline will be the audio track with her as usual, but every clip I have try to add after brings NO audio with it. The clip that I try to file has audio in the Source monitor, but once again, place it in the timeline panel, I have the video.  Ive deleted the first cache files, but that doesn't seem to help.  Has anyone meet this issue before?

  Any help is greatly appreciated!

  Thank you

  Jesse

  Target Audio tracks in the sequence.

  "A1".

• When I drag my clip to the timeline, the audio is wrong with it and disappears.

  Help, please

  Check that you have enabled your audio and video on the timeline.

  

• My first stop runnig suddenly when I try to drag a clip to the timeline or after scoring its entry points and in the Preview Panel, I try to drag it to the timeline.

  Suddenly my first Pro CC 2015-2 arrested runnig when I tried to drag a clip to the timeline, or when, after scoring its entry points and in the Preview Panel, I tried to slide the timeline. Apparently it works because it keeps at the opening, but one cannot do anything but you close with control Q; the keys on the keyboard are one thing that really works.  I can't do anything with the mouse and it seems that a certain way, the software crashed, but with all the panels open and without any warning. I copied the complete proyect to your laptop with the first Minister Pro 2015-1 and it happened the same thing, so I think the question is on the project and it started to happen after the update by 2015-1 about 10 days ago (this is not the first time that's happened but to this day I don't know how every time it turned fixed) old work projects and I finish the proyect (from scratch from another) on the same computer and with the same OS (windos10) without any problem with the Premier Pro CS6. So far I have not had problem with the version of 2015-1 that I bought last November. Could someone tell me what is happening and what is the solution?

  [edited by mod, too long title]

  Fixed with a new version of the same driver 341.92. I hope that it will be forever. Thanks for your advice and also thanks to the chat support team that came to the same conclusion.

• When I drag a clip from the TRAY in the Timeline, the clip becomes cropped?

  As you can see, the clip on the left is the original file.

  The clip on the right is the clip when it is moved in the timeline, you can clearly see that it's been cropped. It didn't happen in previous clips in the timeline - why what is happening?

  HELP, it's driving me crazy!

  Found the solution.

  Because this video was filmed on another camera, it didn't match the settings of the sequence. To resolve this problem, I have a right-click on the clip and selected 'Set to the size of the image.

• Why can't drag a clip in the timeline?

  I just loaded PP CD5 on my Win 7 laptop.  Can I import video clips into my project, but I can't drag one of these clips in the timeline.  When I try and do slip, I get a helping hand with a symbol of the "no entry".  No error message any.

  I vaguely remember having this same problem when I loaded PP CS5 on my Win 7 office several months ago, and I thought I found something on the forums who told me how to fix it, but I can't find it now.  Maybe a change in preferences?

  Any help is greatly appreciated.

  Have you actually created a sequence? If not, go to file > New > sequence, or drag one of your video clips to the icon of a new element at the bottom of the project Panel. You can also click on that to get the option new sequence.

• No sound after dragging a clip to the timeline

  I've imported all my clips. they all have audio when being viewed in the source window.  When I drag them in my sequence window, no audio trax follow!  What is the problem?

  Probably your targeting of track/source is not set just...

  

  See the gray circle A1 block? Note that the block of V1 is blue? With that defined in this way, should the source monitor video but NOT audio... it could be your problem. Click on the track of A1 left to set the monitor trace Source.

  Neil

• Time-remapping has a keyframe when I put new clip in the timeline:

  Hello

  I use PPCS4. I noticed that no matter what new clip that I bring in the timeline to a keyframe effect time remapping to 100%. Is this normal?

  I would like to see no time remap keyframe by default and there are still 100%. The reason is that I use the Mercalli stable plugin and will not work if the time remapping a key image on it. So I always have to erase it first was can use the plugin. A bit boring.

  Thank you

  Simon

  I use PPCS4. I noticed that no matter what new clip that I bring in the timeline to a keyframe effect time remapping to 100%. Is this normal?

  Yes, it is a normal behavior.

• Slide the 2nd clip in the timeline removes audio

  When I drag a clip in the timeline to a new project, it fits perfectly. When I drag a clip in the timeline in this same project, will move in the video, but no audio signal is included.

  I have not had this problem before, thought my videos are from the same camera: Panasonic AVCHD. But I could make a mistake somewhere in the workflow as it is the first major project, I am in train from the passage of Final Cut Pro. I have copied my raw images to an external HD, created a new project and then choose file > import. I pointed out in the record of the raw images and a few seconds, it has imported everything. (In FCP, I'm used to it converting the images into a Quicktime format, but first seems happy to work with AVCHD).

  The original film is more than an hour long, so the camera has divided it in 4.29 GB of files. Will all PLAY in the window of project very well, so I know the audio is there, but when I drag them in the timeline, the audio is not allowed to go with her.

  I have even a clip exported and it re-imported as a QT file. NO other clips cannot be added to the timeline with their audio intact.

  I am grateful for ideas or suggestions!

  Mark

  You probably forgot to patch source track.

  

• Cannot left click and drag the clip in the timeline... Need advice

  Cannot left click and drag the clip in the timeline or drag autour clips in the timeline.

  Can be inserted into the timeline of the Source window, but cannot drag from the source window.

  Can cut and paste into the timeline.

  Cs5 restarting does not help, but restarting solves the problem for a while.

  Tried several mice, but that did not help.

  Have no idea how I got the name of FORMER PRO, must have been drinking champagne years, because I'm a blundering by excellence!
  

  Post edited by: old pro

  Problem solved by pressing the ESC key.

  Someone suggested that in order to heal the same problem in MS Word.

  Problem reappears and solves the ESC key.

  And now my life is complete!

• iMovie 10.1.2 adjust the size of the clip in the timeline

  When I move a clip in the timeline, the size is reduced to a point where I can't move titles correctly.  I tried the setting of the slider, but it does not affect the components of the package.

  Hi, David,.

  You use the scroll bar that you get when you click the gear in the top middle of your screen.  This bar only works on clips in the clips pane, not in the time line.

  The slider beside the button settings in the middle right side of your screen expands the time line so that the clips in it are spread out more.

  Also, if you click on the settings button, a dialog box appears that contains a scroll bar to adjust the size of the clip in the timeline.

  Hope this helps,

  -Rich

• In windows Movie Maker I get Audio when I do drag a video clip to the timeline, what should I do?

  I was OK by dragging separate images to the timeline in Movie Maker. Now, I am trying to add video clips (AV1). When I drag them down only the Audio for the clip is recording during playback. How can I fix to make sure the video track also records? Thank you.

  I was OK by dragging separate images to the timeline in Movie Maker. Now, I am trying to add video clips (AV1). When I drag them down only the Audio for the clip is recording during playback. How can I fix to make sure the video track also records? Thank you.

  ===================================
  There are many types of AVI files and many if not
  most is problematic in all versions of Movie Maker.

  Best bet would be to convert AVI files to the
  Before you import into Movie Maker WMV format.

  There are to many converters available on the net...
  some free, some details... the following freeware is
  just an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your video files on the main screen.

  Or... Click left on the video button and navigate to the
  your video files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When video files are imported into Freemake,
  On the left, click the WMV icon at the bottom of the screen.

  The 'WMV output settings' screen opens.

  Choose a folder ' save in ', so you can find the
  converted files.

  On the left, click the "Convert" button and wait for the files
  to convert.

  That should do it...

• No audio track appears when I drag the clip to the timeline.

  Hi, this problem has just. When I try to put a video file in the timeline, only the video portion appears. I tried different types of video file, and the result is the same. I still have PP CS4 and experimented with the same movie files, and it works perfectly. This is probably a simple solution, but I've exhausted all my ideas. Help, please! I'm under PP CC. Thanks in advance.

  See here:

  FAQ: Why no audio or video will not at the track where I let down?

  After the clip in the timeline, there is no audio track of the clip more

• File video diseppear dragging the clip on the timeline

  When I drag my video clip in the timeline of the video sequence diseppear, audio is the only thing that is able to fall in the timeline panel. The problem arose a few days ago, I think I messed up a few settings, but I don't know what I did. What should I do?

  You have your source patch and follow the correct targeting?

  

  MtD