When I open app SPACE DRIVE LOW that there is not enough space for your project on this device, please free up some space and restart the application?

Similar Questions

• Can not backup on USB drive, says that there is not enough space, but there are many

  I was able to save only once.  the total size was about 4.2 billion.  Now XP doesn't let me put anything on the drive flash 8 bigger than 4,2 g. I tried to crush, deletion, reformatting, renaming - you name it.  I can put large files on the flash drive with other computers, so there must be something done XP.  In properties, it shows a lot of space, but I still get the full message of media

  Well even if you have too many files, size does not matter in the folder root of the USB then
  You can not copy more to it... try to reduce the number of files in the root folder. Try to copy everything
  the files on your hard drive and remove it from the USB and try to copy your file to it. Rob - bicycle - Mark Twain said it is good.

• Hello! The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do? Also says I h

  Hello!

  The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do?

  Also says that I have no access to this service. For access, please contact your COMPUTER administrator or connect using the ID

  Hello

  Greetings!

  Is Typekit on?

  Visit this link: Add to your desktop of Typekit fonts

  Concerning

  Jitendra

• When I try to run Age Of Empires with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  Former title: Trouble running games CD, post installation under Vista. That is to say 2 AoE, Warrior kings.

  I have vista on my laptop, I installed games like shogun and medieval total war and they both work perfectly, I tried to put it on the age empires and warrior kings: battles who are also on a cd format, I installed the last but they usually run after that. Although the instialltion is over, I get asked if I wanted to leave the program to run as administrator. : s

  DVD/CD drive recognize there is a disc, but does not work automatically. I can't install the program normally when I run the setup.exe for the game. When I try to run the program with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  I tried to run them in compatibility mode, using all variants. and also I tried soome of advice from the help article about the disk drivers. game discs are clean and one striped.

  Why can I install the program and access the drive to use the files it contains, but then not use the disk?

  Hello
   
  
  This problem may occur if one of the following conditions is true:
  a. you do not use the game disc to start the program.
  b. the CD player is not compatible with the program.
  c. using a copy of the program CD.
  d. you are not connected to the computer as an administrator.
  e. the programs interfere with the start of the game which is running but is invisible to you.
  f. the CD-ROM drive uses out-of-date drivers.
   
   
  I would ask you to try the methods listed in the article below:
  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.
  http://support.Microsoft.com/kb/228985/en-us
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open the illustration. There is not enough room for the window; increase the area of document and try again

  Hello

  I'm under Illustrator CS6 on a Mac version 10.10.3. I created an Illustration and I accidentally did very little to save and close the window. Now whenever I open the file I get the error "unable to open the illustration. There is not enough room for the window; increase the area of document and try again. "This problem is specific to this file only - I can open all other correct files, and anyone who tries to open that particular file on a completely separate machine receives the same error. I read all the posts of people having the same error message, but their problem is different from mine because my problem is specifically limited to this file. I've trashed preferences, hidden and shown the toolbar Application and an open framework of other files and makes them great as possible, has the file open on the file menu, instead of double clicking, and none of these methods work.

  Can anyone help?

  Thank you so much in advance!

  Well, problem solved. For future users with this problem:

  Open a new document in Illustrator

  Press "F" to enter full screen mode

  File > open to open the file problem

• When I try to access the services it tells me that there is not enough storage space.

  I tried to access the services to change some settings to see if I can get my printers and devices is displayed but I get the same error messages saying: there not enough storage is available to complete this operation. any ideas?

  Hello

  1. what exactly is the problem you are having with the computer?

  2. Since when are you facing the issue?

  3 are logged as administrator?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest that you try to perform the file system Checker analysis on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest you to run a full scan using the Microsoft Safety Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Hope this helps and keep us posted.

• Microsoft cannot open or save documents more because there is not enough disk space or memory

  Using the Chrome browser in Windows 10 attachments to emails sent to my Gmail account are not available. The error message is the same mentioned in the first request:

  "Microsoft Excel cannot open or save all the documents more because there is not enough disk space or memory.

  The solution is simple - it's just a stupid error message that has nothing to do with the real problem, and the problem is actually a feature of microsoft, is also often:
  -office now has a kind of function 'protected mode', which prevents the office applications to do things under certain conditions.
  -One of them is to stop excel from opening attachments from outlook :-(

  Go to options Excel, the Privacy Center, settings and uncheck all options on "protected from view.

  Save and voila, suddenly excel can open all the files and has absolutely no problem with your GB of free memory.

  Thanks to the brilliant mind who has designed such an awkward feature with the awkward error messages and options ultra deep to clear - and of course no simple help.

• Photoshop CS5 Extended on iMac thinks that there is not enough memory

  When I try to open a tiff file of 42 MB in Photoshop CS5 extended on my 2.16 GHz iMac Intel Core 2 Duo with 3 GB (OS X 10.6.4 64-bit), Photoshop displays a window with the message "could not complete the command open because there is not enough memory (RAM live).»

  The same file can be opened easily in Photoshop CS2 on my PC of 1 GB.

  Performance of Photoshop preferences are set on let PS 2013 MB (70%).

  I've read several PS performance guides user to one, but not available.

  Can anyone here help me? Thanks in advance!

  Kind regards

  Matthew

  You are on a macintosh computer, there is a command line tool called tiffutil that can dissect a tiff file.

  tiffutil - verboseinfo file.tiff

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• I'm running win7 ultimate 64 bit on an hp Pavilion 6630f model when I try to install flash player 17 he won't let me and told me that there is not enough disk space, but after checking, I see I have more than enough 67 gb free. any help would be appreciat

  I had it installed and when I tried to update, it gave me same message. so I uninstalled and tried to reinstall flash player 17 again and same problem, saying I don't have enough disk space

  My problem fixed.

  M_Vargas thank yo for each of you to put and all the other people who pitched in., I really appreciate the help and opinions. problem taken care of. I uninstalled Adobe Flash Player restarted 17 he tried once more with the facility and the same thing... uninstalled once more ran my ccleaner and restore my computer to an earlier time of 1 week. Recharged system went to the Adobe Web and download Flash Player site once more and it has installed, installed fine. rebooted the system and on the next reboot it ask me if I wanted to update my Flash drive I clicked on Yes. Downloaded and this time it installed the up date very well with no (not enough disk space) Message. It was my dose to the Situation and the only thing I could think of and cela worked. So, I hope it helps someone in the future that would have met this problem or the Situation. Once again thanks M_Vargas and Jean-Luc for your help and your contribution in this case of mine.

• Trying to extend the c drive with space unallocated in diskpart.exe - I get the message that there is not enough space. what I am doing wrong?

  DiskPart.exe help - not enough space - I have more than 5 GB of unallocated space. trying to expand the C: drive

  Hello mark_kman,

  Thank you for visiting the Microsoft answers community.

  It sounds as if you have multiple partitions. Disk management and DiskPart extends the volume with a focus on the next contiguous unallocated space. For basic volumes, the unallocated space must be on the drive and must follow (have a plu sector offset number than) the partition with focus.

  If you are looking at disk management, this means that, if you look at your partition C: the unallocated space MUST be located directly to the right of the C: partition. If you have another partition between the two, you will be allowed to extend the partition directly to the left of the unallocated space.

  This could be a work around, if you have C: and D: and have files on D: but have more space.

  -D: shrink to create just enough unallocated space to store your files located on D:.
  -Create a new partition with unallocated space to move your files.
  -Move your D: files to your new partition.
  -Now, to delete the D: partition

  This creates unallocated space between your C: partition and the new partition that you created to move your files.

  -Now right click on your C: partition and extend as usual.

  Hope this helps
  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Every time I download something, I get a popup saying that there is not enough space in the recovery D. Windows Vista OS disk

  When I got to my PC, I've been back often and now there is no space left. When I answer the pop-up window, it only shows the Recylcl tray and there is nothing in there. The Vista operating system has been installed by the manufacturer. This popup really slows down my pc startup and when downloading.

  Hello

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• When I was in the middle of work, he said that there is not enough storage and changed the preview of what I was working on. It is not sensible, and it won't fix anything. What should I do?

  I was in the middle of work when all of a sudden he had no storage. He then changed the preview and not allow me to do all the files. I know that there is enough memory on my computer so I don't understand why she said this. I started to pay for my account today because my free trial is over. It didn't happen during my free trial but for some reason any that he's done for me. This happened to my friend. What could I do to fix this?

  Hi Gianna,

  Please share some details such as the exact version of your Illustrator, your computer OS and a screenshot of the problem.

  Thank you

  OM

• Why I get that there are not enough licenses installed to perform the operation?

  I have three servers that I fight with the chance to talk to an hp 1510i, but it's a different test. I have rebuilt the three servers 2 and now when I try to add them to the virtual Center 2.5.0 I get "There not enough licenses installed to perform the operation." These machines were on Virtual Centre before I rebuilt the. I don't understand why licensing is not be happy. Can someone give me advice on how to fix?

  Let me know if you need more information.

  Thank you

  Ken

  Your image shows 0 licenses for virtual center agent, that's why you can't add.  Check your hosts and see which servers are using what licenses.  A reboot must have cleared out the number of licenses, which must have caused the hosts re - synchronize the license info, which they periodically anyway.  This may take some time, depending on your host is on the refresh interval.  Make sure you do not have more than 6 ESX host, because that's what you are licensed.  If this is not correct, check your license file is not the correct information.  You can always go online to the portal of licenses and generate a new.

  -KjB