When I plug in my sound plug for a sketamatics for a intel celeron sr1420NX

Similar Questions

• iPad 2 Mini - Lcd shows the Apple logo for 2 seconds and disappears but reloading works when I plug in the charger.

  The title should cover everything about what I'm going to tell you.

  The screen is black, while the iPad is running when I plug it into my mac, I see all my data and I can hear the sound of my messages/screenshot or screen when charging.

  The only time I see the Apple logo for 2 sec is when I restart the iPad now Power + Home at the same time.

  Would appreciate if you guys could help.

  NVM, I found the cause of this. This is a backlight problem. Apparently the filter or the fuse has been damaged and needs to be replaced... another $ 40 on the iPad repair...

• envy15: sound does not work when I plug my HDMI port monitor

  I have a new HP Envy15laptop and an older AcerAC2016W with VGA connection.  I bought a cable adapts hdmi vga.  When I plug my monitor, the noise stops.  If I unplug the monitor portable speakers work fine.

  Hi, l

  I do not know what VGA to HDMI Cable you speak but VGA does not carry sound and your machine can judge use HDMI audio so it stops sound with HDMI, if you want to use the sound on your computer, you should disable the HDMI sound:

  Right click on speaker icon > devices back select Play

  Select use internal sound and turn off the HDMI sound (if it is there)

  You will need to enable when using pure HDMI (IE HDMI to HDMI TV for example)

  Kind regards.

• I can't hear any sound in my headset when I plug in my laptop which has Vista SP2 installed.

  I can't hear any sound in my headset when I plug in my laptop which has Vista SP2 installed. While my speakers work well, I cannot hear any sound in my headphones every time that I plug them in. And whenever I take off the helmet, I can hear clearly. However the same headphones work with another machine perfectly. I tried all the troubleshooting guides, but can't get my headphones to work with my laptop. Appreciate if a solution can be provided.

  Hi reddys_b,

  1 have. what measures you tried to solve the problem?

  2 are you using a USB one or one that has a microphone or headset right?

  Step 1: Start by checking if the default sound device is set correctly.

  a. Click Start type sound in the box start the search.

  b. click sound in the results of search at the top of the start menu.

  c. click the reading notice the check mark next to the default device. For most users, the default device is speakers. Change the default device with headphones.

  d. Select the audio device you want to the default audio device and then click on set as default.

  e. click OK to save your settings and close the sound dialog box.

  Step 2:

  You can also try updating the sound card drivers and check.

  For more information, you can consult the following link:

  Tips for solving common audio problems

  http://windowshelp.Microsoft.com/Windows/en-us/help/1e87a3e8-c0e8-49af-980F-9eb6686f42d21033.mspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't load my iTunes to my iphone 5 s.  When I plug it to my computer for access to, I get a message that says: I need a newer version of Itunes.  I go on the website, I download but nothing changes

  I can't load my iTunes to my iphone 5 s.  When I plug it to my computer for access to, I get a message that says: I need a newer version of Itunes.  I go on the website, I download but nothing changes

  What is the number of current version of iTunes you have on the computer? What computer OS do you use? If Windows, what version, so OS X, what version number?

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• can someone tell me why the sound becomes distorted on my external speakers when I plug the charger on my netbook?

  I have a set of logitech speakers and a subwoofer that I use on my netbook, but when I plug the charger to recharge the battery, the sound distorts seriously which means I can listen only as long as the battery, I sent l; ogitech but they said it was a problem on my computer. Anyone have any ideas why?

  Hi gaz2558,

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  http://support.Microsoft.com/kb/813498

  Also update the latest audio drivers.

  http://support.Microsoft.com/kb/166774

  Reference: http://support.microsoft.com/kb/307918/en-gb

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my computer flashes constantly when I plugged my projector lcd for her?

  I installed the software.  However, when I plug in the projector, it begins to blink when I go to another screen or even use it.  I thought it was the projector; However, my computer is when I connected it to an another projector. What is going on?  I changed the resolution!  Help!

  Hello

  Did you change your computer?

  I suggest you to update the display drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

• How make the USB auto-ouvrir its Nav Pane folder when I plug. Vista for this? __

  In the Navigation pane (what I call the directory root - no?), when I plug a USB key, I have to click on the folder "Computer" to open it, then the folder of USB stick to open that in order to be able to drag files from the hard drive to the files inside. The bookmarks bar is useless, it's just a subfolder in the "Favourites", just as boring the USB folder and is not yet open USB folder in the Nav pane. I can't find a way to make the USB auto-ouvrir its Nav Pane folder when I plug. Vista can do this?

  This is a Windows update that addresses the functionality of Autorun.  I don't know if it can solve your problem, but it can facilitate some of the following solutions or allow them to work if Vista is up to data: http://support.microsoft.com/kb/971029.

  Here's how to use Autorun with a USB Flash drive that can solve your problem (but it is a bit Advanced): http://www.samlogic.net/articles/autorun-usb-flash-drive.htm.

  Here is a free download which probably fix the AutoPlay in Vista and XP (when I insert my flash drive, a menu popss send me the optios including by studying the disk and when you click it it starts at the root of the drive, and I think that should happen with your USB key as well). http://www.mydigitallife.info/2008/01/15/cleanhandlers-free-download-autoplay-cleanup-utility-for-xp-and-vista/.  I don't know if this will help, but it may solve the problem.

  Here is another article with a procedure of activation autorum for USB drives.  I think you want to insert explorer.exe as filename to open Windows Explorer. http://www.pctipsbox.com/how-to-autorun-programs-from-usb-flash-drive/.

  Here's yet another article on how to set up automatic execution for a USB key: http://www.dailycupoftech.com/usb-drive-autoruninf-tweaking/.

  I hope that one or more of these items helps solve your problem and allow you to do what you want to do with the USB.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No sound when I plug headphones after that Windows 8 download

  When I play a sound on the speakers, I can hear it perfectly. However, when I plug in my headphones, I hear nothing. What should I do to fix this?

  I had the same problem, I resolved it by disabling the fast start feature in the control panel:

  1. go to Control Panel-> Power Options-> choose what the power buttons do

  2. uncheck the enable quick start

  3 proceed to a complete stop by calling the shutdown /s /t 0 in the console, or create a shortcut with this command and run

  4 turn on the computer, now the headset should work ok :)

• When I plugged in a new card reader, I lost all my saved for importing metadata presets. Now, when I type in a new and save it, it is not available. Help, please. Thank you, dwc

  Hi people,

  When I plugged a new card reader, Lexar Pro USB 3.0 Dual Slot player, I lost all my saved metadata that are used for imports.  Now, when I type in the metadata, it registers on the photos, but then it is not saved for later use, as it was before. I'm trying to save him, but it does not work. Any ideas? Is Lightroom 3, version 3.6.  10.8.5 Mac.  Thank you, dwc

  I think that's the problem. Go to the original catalog, uncheck it, close LR, open LR, and create the new catalog.

• When I plug my iPhone to my mac my image do not appear for me to transfer

  When I plug my iPhone iOS 9.3.1 in my macbook pro, the images located on my iPhone don't show in my iPhoto even if I was not already put so

  There is a photo box that must be checked - it of just upstairs and said something about importing the photos automatically when a device is connected

• Buzzing sound when I plug earphones

  Hi, I have an ideapad Y570 with HDD and SSD. When I plug the headphones or the speakers, I can hear a buzzing in the left channel. I went to fix it!

  Help me please!

  THX

  I try Linux Ubunto and buzz while remaining!

  THX you

  I call Customer Service.

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.