When I print I get several pages with a feel a little on all the pages I want to print
When I print, I get several pages with what I print with a few lines on each page until what I printed is finished.
mamorse,
Thanks for the additional info. Lets try to download and execute printing and scanning doctor found here. It may fix a lot on its own, but otherwise it will give us a better idea of what is happening. The weakness of the signal is not likely the culprit (because he worked for a long time) but we can try to change that if other steps fail.
Tags: HP Printers
Similar Questions
-
When I try to scan several pages, it puts the pages as separate files instead of a single file. For example, I may want to scan 5pages ofa patient office visit, yet, when I scan using the ADF, it separates each page in a single file. I need to have the pages I scan have a single file. OfficeJet 6700
prod # CV078A
Windows 7 premium 64-bit
Same thing for me. I called HP about it the first time I tried I scans a document when my printer was 7 days old. I was connected with the service to customers in India. The technician spent about an hour with me trying to get the 6510/6515 printer to work, even to take control of my new 64 bit Windows 7 core i7 notebook. Ultimately she essentially told me that even if it is announced to scan documents, this really means that each page is a separate document. In other words, this printer, as well as all other issues, it is will only scan one page at a time.
-
This is how it brings together files I have Acrobat 10 when I try to combine several files with names like 0022_0_ point report 0022_2_Item report through report 0022_15_Item it combines out of use. Any ideas?
Hi tomp29181935,
Please refer to this page:placing the pdf of the numerical order when combining (combining files)
Let us know if you face any problem.
Thank you!
Shivam
-
I want to show the tabs on multiple lines in firefox.
While Firefox allows you to have as many tabs that you want to open at any time, if you exceed the width of the screen, you will then need to scroll left and right to see. I want to have multiple rows of tabs.
In order to get several features of tab line do I downgrade to the version of firefox that supports one applications below?
What are the best options for several features of tab line?
Tab Kit - https://addons.mozilla.org/en-US/firefox/addons/versions/5447 Tab Mix Plus - https://addons.mozilla.org/firefox/addon/tab-mix-plus/ Tab Utilities - https://addons.mozilla.org/firefox/addon/tab-utilities/
Best regards
BubbaExtensions 'Tab Mix Plus' and "Tab Utilities" support Firefox 10.0a1, so no need to downgrade your old Firefox 7.0.1 for an even older version.
-
Original title: update problems
I got the auto update on but when it was over Secunia showed that kb2585542 was missing. I tried all the suggestions given by Microsoft but am unable to open this file.
Hello
1 have. the troubleshooting steps you tried to solve the problem?
You try to install the update (KB2585542) manually and check if updates installed.
Update security for Windows XP x 64 Edition (KB2585542)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28625
In case you have 64-bit Windows XP operating system installed on the computer you can download the update manually the link provided below.
Update security for Windows XP x 64 Edition (KB2585542)
http://www.Microsoft.com/download/en/details.aspx?ID=28590
See also:
You cannot install some programs or updates
-
My kodakESP5 will not print all the object I want to print only a part of it
My kodak ESP5 will not print all the object I want to print only a part of it
Hi jakenny,
You may need to replace an ink or toner cartridge. Check the status information in the queue for low ink or toner messages. If the printer has a status or display area, you can also check for low ink or toner messages on the printer itself. For more information, see change an ink or toner cartridge and view the print queue.
Follow the instructions below that may help you resolve the issue.
Method 1:
See the link below and check the print settings.
Choose printing options
http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options
Method 2:
Try to update the printer driver which might help you resolve the issue.
Click on the link below for more information on the updated printer drivers.
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
Check whether the problem is resolved.
For more information, please see the link below.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
How to get several lines with series C 9501 running with SoftMotion on a cRIO 9074 modules?
Hello
I'll have set up many of the variable axes defined by the user with two modules in series c 9501 running on a Compact RIO 9074 stepper.
I started with the example of "9501 Stepper Drive (Getting Started)", which worked fine with a simple variable user defined axis (Test-interactive panel, SoftMotion functionality on the host).
I need to control 2 axes and I could not find any help on adding a second axis, so I came up with the following approach. My approach was to expand the FPGA VI in a way to add features to the second variable axis defined by the user, so I did the following steps:
1. Add a new variable axis defined by the user.
2. Add the variables defined by the same user as the first axis had during the second axis.
3. a copy of global variables that the first axis necessary to use independent global variables for the second axis.
4. develop the FPGA VI while-loops with the circuits of same for axis 2 and ensure that the circuits for axis 2 use their own global variables, the right modules, their user-defined variables and change the index of the axis from 0 to 1 (don't know exactly how the axis index is defined).
4B. I also tried to copy all the loops for each axis had their independent loops. Then adapt the global variables, modules, the variables defined by the user, index of the axis.
The FPGA VI compiles and runs, but when I get to the Panel of interactive Test for both axes and try to enable them, it throws an error-70228 (Controller unable to confirm that the drive is enabled).
I'm doing something wrong? Is it perhaps a simpler way to get two 9501 modules working with SoftMotion?
I can provide my two examples of published projects (same loop loop / independent), if necessary.
LabVIEW installation:
LabVIEW 2014f1
Module FPGA 2014
In time real Module 2014
SoftMotion 2014f1
cRIO-drivers 2014f1
Xilinx tools 14.7 2014
I hope someone can help me, thanks in advance.
I managed to make it work.
I was missing that a Subvi in the FPGA VI engine control missed their axis index 0. I couldn't even they worked with an index of the axis until I looked into the block diagram of those.
So what happened was that my routines on the second axis disabled immediately the first axis because of bad axis index.
Definition of the index of 0 and 1 axis (axes 1 and 2) for each unique Subvi of motor control was what was missing.
-
This is part of the error code, if you need more just ask. (It's in Norwegian, but I guess you'd understand it anyway)
Problemsignatur:
Pa problemhendelse Navn: BlueScreen
OS-versjon: 6.1.7600.2.0.0.256.1
ID for nasjonal innstilling: 1044Tilleggsinformasjon om problemet:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80082494B8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS version: 6_1_7600
Service Pack: 0_0
Product: 256_1I have all the latest drivers, and no update is available in Windows Update. When I check the event viewer, it is said:
System - Provider of [ Nom ] Microsoft-Windows-Kernel-Power [ Guid ] {331C3B3A-2005-44C2-AC5E-77220C37D6B4} Event ID 41 Version 2 Level 1 Task 63 OpCode 0 Keywords 0 x 8000000000000002 - TimeCreated [ SystemTime ] 2009-11-16 T 12: 53:50.350843600Z EventRecordID 4618 Correlation - Execution of [ ProcessID ] 4 [ ThreadID ] 8 Computer:
Motherboard: ASUS P5E WS Professional
Chart: Sapphire Radeon HD 3870 X 2 1024 MB
CPU: Intel Core 2 Quad Q9450
RAM: OCZ PC2 - 6400 Platinum Vista PErformance Edition 8 GB (4 x 2 GB)
Power: Power PC & Cooling Silencer 750WNothing is overclocked, and my cooling system is running on max, never had a problem with the heat.
So what is the power of the nucleus, and why he will enter the blue screen only when I am games? And most importantly, how do I do?
Thanks for the replies!
sweppes
sweppes,
It was just a possibility that heat is a problem. Also in your games if you operate in high res\max video settings you can turn them down to smaller settings and test.You also mentioned that the motherboard has not yet all drivers for Windows 7. Maybe it's that you will have this kind of problem until you get correct chipset drivers.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I hope someone can help me with this. I've just updated to the new CC first pro and when I drag a clip that has audio it displays correctly only audio in the audio track, BUT... when I drag a clip (or even the exact same clip) in the sequence of the audio track is not displayed and cannot be heard or published. Just to double check, I did a new project, tried to load these two clips in reverse order and it worked the same way. Only the first loaded track will show that it is the audio track. When I create a new sequence by using the menus at the top specifically to test this, none of the audio tracks are displayed when the drug on the time line.
I also tried to load the video in the window source first before I drag it down. Sometimes the source plays audio, sometimes it does not. Anyway the audio still does not appear.
I hope that there is just a shoddy setting, I've turned on. I know how to do Prime Minister rip the audio output and is it she's own track after the fact, but the whole issue is speed and convenience, and I never had this problem in the old version. Thanks much for any help.
Check A1 left the lock.
-
During the installation process of 6 Lightroom, I get a box that says 'Windows Vista not supported'. I have Windows 7 with Service Pak 1. I meet all the other requirements listed. Any ideas?
Hi Chuck,
You can check out the link below.
Hope this will help you.
Kind regards
Hervé Khare
-
I just downloaded Windows 10. My Contacts and calendars from my iPhone and iPad will be synchronized with Outlook (2013). I made settings were right to iCloud, but when I click on iCloud contacts or calendar, I get an error message that says: "cannot open all the files. The information store cannot be opened. No idea what it means.
Has anyone seen this message? What "information store" is this referring?
Try connecting to iCloud and then reconnect.
TT2
-
Impossible to get rid of Security Suite on my PC (read all the other posts)
Hi guys,.
I also have problems with this security suite. I followed all the guides provided on the site to remove it, but it is always present. It looked as if it had been uninstalled, but returned shortly after the restart. I would rather not reformat my computer because it's a pain so wanted to know if there are other things I could do to remove it. None of the anti-malware programs have worked and I don't really dare to change anything in the registry because I don't know what I'd be looking at and could make things worse.
Thank you!
Sam
Hello
No one program cannot be used to detect and remove any malware. Added that often easy to
detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
better to be too full now than to pay the price much later. Check with these extreme
Overkill point and then run the cleaning only when you are sure that the system is clean.Security Suite and AV Security Suite are fake antivirus, a scam to get you to pay for them
While they have no advantage.Remove Security Suite (uninstall Guide)<-- read="">-->
http://www.bleepingcomputer.com/virus-removal/remove-security-suiteHow to remove AV Security Suite (uninstall Guide)<-- read="">-->
http://www.bleepingcomputer.com/virus-removal/remove-AV-security-suiteIt can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
It's here.Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en-----------------------------
also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all the security measures you
took (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro
--------------------------------------------Here are some free scanners online help if needed:
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------
Also do to the General corruption of cleaning.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I'm trying to print business cards with a Spot UV coating. I have a layer above the work with a spot color (set to Green by request of the printer). Below is a logo, essentially a red circle with a few highlights and depth. My question is that, after exporting a PDF file, all of the highlights and details on the red circle disappear in the overprint preview (it is there when I hide Spot UV layer, but missing when I'm hiding the color of the task). What can I do to keep this information?
Thank you!
I managed to solve the problem and embarrass me in the process. It wasn't a problem with the settings, but rather a "stowaway" duplicate of a red circle that lurked on the layer UV Spot on top of all the details. Thanks for your help, but it seems that my problems require a different kind of forum!
-
I've recently updated Firefox to version 42. On the old version, I could go tools-> Page Info and there would be a menu typical Edit at the top where you can select, copy, etc. On the new version this menu is absent and Ctrl C/Ctrl V do not work. Any suggestions on how to get that back?
Try to rename (or delete) the file xulstore.json in the Firefox profile folder.
You can see this bug:
- bug 1219831 - history/downloads/Bookmarks window is stuck in fullscreen
-
Firefox functioned perfectly earlier today. Tonight, when I tried to start Firefox as I usually do by clicking its icon in the quick start of Windows 7 bar there is no frequency. The same thing happens when I click on the application icon in Windows Firefox program folder. Is some way this can be fixed easily?
I ran a full scan with Norton 360, Malawarebytes and Iobit Malware Fighter, whose no is no problem. Also, I checked the settings of Norton 360 and found no problem with the settings of Firefox. I downloaded the Firefox installation files and ran a custom implemented, by clicking on upgrade. Firefox now works well with all the Add-ons, bookmarks, history, cookies and saved passwords intact.
Maybe you are looking for
-
I cannot download my purchase on icloud songs
I can't download my songs on icloud purchase helps keep reviews
-
Pavilion a1250n: cannot use 4 GB of memory on 64-bit operating system
I resurrected this PC to give to my grandson, so I added 2 GB more memory. But when he starts, he sees only 3 GB. The configuration of the BIOS shows all 4 sticks of 1 GB. I ran the test memory Windows startup, and it shows all 4 GB and it extracted
-
I have not yet received my vers.173 upgrade.
I have the regular Razr and entered the program installation and updates of system to verify the upgrade. It just keeps telling me "checking update available. Please wait... » I left on the search for a long time, several times in the past few days.
-
I am not able to install my printer on my laptop Asus. I have the Hp OfficeJet 4500.
I have a Hp OfficeJet 4500
-
Contacts from blackBerry Smartphones appears
My client has a blackberry 9810 and for some reason some may see his contacts in his favorites or recent but cannot see them when you look at all THE contacts. Need to change this as soon as possible