When I try to run scandisk, it cancells and does not even work when I try to run it as administrator from Dos. Any ideas?

Similar Questions

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• I can't chat support to cancel my annual package. Still, it redirects me to the community page and does not even show the option 'chat '.

  How can I contact support if she constantly redirects me to the community or the instruction page "how to cancel your annual plan? I monitor something?

  You can also contact the cat of bu billing support directly using contact customer service from Adobe

  Concerning

  Stéphane

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• I can't get adobe to work and when I look in ms confing is shows that it is stopped and does not work how can I run past

  i cant get adobe flash player to work and when I look in ms confing is shows that he is arrested and does not work how can I change to run again

  Hello

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)

• When I try to view my devices to Control Panel/hardware and Sound/devices and printers, he treats forever and does not show the devices.

  When I try to view my devices to Control Panel/hardware and Sound/devices and printers.  It treats forever and does not show the devices.  I need help!

  
  Original title: device and Printers window
  There could be various reasons why the window devices and printers stalls. All the control points are listed here.
  Fix devices and printers folder is completely empty in Windows 7

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• I need to install a driver on my computer. When it downloads it automatically is to open with excel and does not demand for correct installation. Any suggestions?

  I need to install a driver on my computer. When it downloads it automatically is to open with excel and does not demand for correct installation. Any suggestions?

  Hello

  1. for which device you are trying to install the drivers?
  2 are you able to install or run any .exe on the computer file?

  Try to run the fix to the article below and check if this help.
  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.

• Network type changes 'Public' and does not return to work when the default gateway is detected

  Original title: Type of network not restored on ethernet cable reconnect.

  I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

  Hello

  You have any other network assets wireless (specifically) running on the computer?

  Have another active network connection could also cause this.

  Allows us to follow the methods mentioned below and see if they help.

  Method 1: Run the network troubleshooter.

  When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

  See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2: check if network discovery and file sharing options are enabled in the network and sharing Center.

  See the following steps:

  a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

  b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

  Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

  Collapse this includes this ima

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  
  Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I try to install the im creative cloud my iMac and the process hangs and does not end. What can I do to solve the problem?

  I try to install the creative cloud in my iMac and the process hangs and does not complete. I've used the creative cloud cleaning tool...

  What percentage he block?  About 42%, open activity monitor when it crashes and complete the process of helping adobe dangling.

  otherwise, troubleshooting installation using newspapers in Photoshop Elements

• When I save my photos in Photoshop, it freezes and does not save my image?

  When I save my photos in Photoshop, it freezes and does not save my image?

  Hi ggonzal,

  Please reset the Photoshop preferences and then try again.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Related link: functions of files preference, names and places. Photoshop CS5

  Let us know if it helps.

  ~ Mohit

• As I installed Sierra, my Trusteer account to my Bank quit and does not work when I reinstall. Neither will Quickbooks!

  As I installed Sierra, my Trusteer account to my Bank quit and does not work when I reinstall. Neither will Quickbooks! Help!

  Trusteer (report) has caused a lot of problems Mac users such noted search Apple Support communities here.

• the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  HI sselden,.
  Thank you for your question. Currently the version that you are on the old version. The current version is 29 and the beta version is 30.

  I recommend you to install a new beta version or the more up-to-date. http://www.Mozilla.org/en-us/Firefox/channel/