When I try to update my ipod touch to 4.2 os, my Windows Vista HP computer turns off completely. There is no BSOD, just black and silence.

Similar Questions

• When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options. I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally.

  problem reinstalling windows Vista operating system.

  I'm trying to reinstall the windows Vista operating system.  When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options.  I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally.  How can I solve this problem.  Thanks in advance for your support.  Valerie SG

  Why you want to reinstall your PC? It could be that you don't need to reinstall Windows, and solutions you could solve, which is recommended.

  However, if you want to reinstall your Windows, it's NOT F8, F8 key belongs to Windows and he'll fix the problems. To reinstall Windows, you must use differently for Dell steps:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_347576&isLegacy=true

  And for more details, you could visit the Dell Web site and search for your model and find the method to do this, or contact technical support:

  http://support.Dell.com/

• When I try to update itunes I get an error message saying that windows setup has a program that does not work if the update cannot compete how can I remedy

  I am running windows xp and when I try to update itunes on my computer I gat windows error message install is missing either a program or a program that can't run so cannot complete the installation. How can I solve this problem?

  I received a response that gave me a link to the microsoft fixit Center which fixed several problems that have been causing this to happen. So if you have this problem, or a lot of other problems, you can go to the following

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

  other then you can go to

• Error: failed to initialize DirectX when you try to play a game on windows7, which worked well on Windows Vista

  When I reinstalled the game "Anno 1404" I get the error "failed to initialize DirectX. The game worked perfectly on windows vista, but I changed to windows 7. I already reinstalled directX, but the message keeps popping up. What can I do?

  
  

  My laptop is a HP pavilion dv2000

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When you try to open a session message a userinit.exe (oxc0000005) on Windows Vista

  When you try to open a session in systems invites a userinit.exe (oxc0000005) on Windows Vista message and appears a black page, tried to work on safe mode and restart, but does not solve the problem and won't let me in in the operating system, please notify

  Startup Repair: frequently asked questions

  Here are answers to some common questions about startup repair.

  What is the Startup Repair?

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  If you experience problems when you attempt to run the Startup Repair tool, or if your computer does not have the Startup Repair, your computer manufacturer can have customized or replaced the tool. See the documentation provided with your computer or go to the manufacturer's Web site.

  How to use Startup Repair?

  Startup Repair is located on the System Recovery Options menu, which is on the Windows installation disc. Startup Repair can also be installed on your drive hard if your computer has preinstalled recovery options. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  If you have a Windows installation disc:

  1. Insert the installation disc. If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.

  2. Restart your computer.

     Click the Start button, click the arrow next to the button lock and then click on restart.

  3. Choose your language settings, and then click Next.

  4. Click on repair your computer.

  5. Select the operating system you want to repair, and then click Next.

  6. In the System Recovery Options menu, click Startup Repair.

  If your computer has preinstalled recovery options:

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

     Click the Start button, click the arrow next to the button lock and then click on restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  3. In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER.

  4. Select a keyboard layout, and then click Next.

  5. Select a user name and password, and then click OK.

  6. In the System Recovery Options menu, click Startup Repair.

  Are there problems Startup Repair cannot fix?

  Startup Repair cannot fix hardware failures or certain types of virus attacks. It is not a backup tool, so it cannot help you recover personal files, such as photos or documents. To help protect your computer, back up your system and your files regularly. For more information, search for "backup" in Help and Support.

  What happens if startup repair is unable to solve my problem?

  If the repairs are not successful, you will see a summary of the problem and links to contact for support information. Your computer manufacturer may include additional support information.

  See also

  • What to do if Windows does not start correctly
  • What is system restore?

  Also on the screen where you choose the Startup Repair, you can also choose command prompt. Type this (it's a single line)

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v "Userinit" / t Reg_Sz/d "c:\windows\system32\userinit.exe".

• When you try to respond to a craigslist ad, it tells me that Windows Vista is not supported for HTTP messaging.

  When you try to respond to a Craigslist Ad, tells me windows vista doesn't support Http for e-mail. Can't get windows live to place where I included necessary E-mail incoming outgoing = infi.

  original title: how to make windows live work?

  Hi Leo,

  Since you are faced with the question when Windows Live mail, you can publish your application in the Windows Live Forum for assistance:

  Windows Live Support

  http://windowslivehelp.com/searchresults.aspx?query=issues%20responding%20To%20A%20craigslist%20AD&ProductID=15

• I have a windows vista desktop computer. My usb adapter see all fi networks wi and the lapttops work with it, but it says that it cannot connect when I try to connect. What is my settings on my pc?

  My computer settings re-put recently. It's not the adapter I bought a new and the wi - fi works very well. Help, please! I already did the thing where you go on manage wi fi represents and has deleted information and tried again, but they don't seem to work.

  Hello

  
  

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  
  

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

• When I close a session, the computer turns off completely, but restarting said closing innacurate?

  When I close a session, the computer shuts down completely.  When I run again, I have the closure inappropriate message, why is it like that?

  Hello

  If I understand correctly the computer automatically stops when you close a session / program and displays the message "incorrect closure.

  is that correct?

  Please follow the links below to solve the problem.

  Start your computer in a clean boot to avoid conflicts with third-party software.

  Method 1

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: When you have finished all necessary troubleshooting steps, please follow step 3 of the article mentioned above, to start the computer in normal mode.

  Run a SFC system analysis

  Please post the SFC scan results, you can find the results of the analysis to the following location.

  C:\Windows\Logs\CBS\Cbs.log

  Method 2

  Description of the error event ID 41 core Windows in Windows 7 or in Windows Server 2008 R2: "the system has rebooted without stop properly first.

  http://support.Microsoft.com/kb/2028504

  Method 3

  Please scan the computer for infections by using the links below.

  Reference link:- http://www.microsoft.com/security/pc-security/default.aspx#Safety-products-and-scans

  Microsoft antivirus software: -.

  http://www.Microsoft.com/security/PC-security/malware.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  It would also help if you provided more information.

  1. What is the full error code / exact / message?

  2 is specific to an application or a program being closed the question?

  3. what version of the Windows operating system do you use?

  4. What were the recent changes of hardware or software that are performed on the computer before the question?

  Please provide the information requested to receive specific troubleshooting steps.

  I hope this helps.

• When select hibernate the computer turns off completely

  original title: HIBERNATIION

  I did disk cleaning. After that, my hibernation is not work .i he recovered by typing powercfg.exe /Hibernate on AND powercfg h IN THE COMMAND PROMPT option. BUT EVEN AFTER THAT MY SYSTEM WILL STOP THE PROCESS INSTEAD OF HIBERNATION. WHY

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  ----------------------------------------------------------------------------------------------------

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I get an error code 8 when you try to shut down at the end of the day. Windows Vista Home Prem freezes one want to close out manually

  I defragment. my system ran controls software error, Microsoft Fit it checks. Don't know what else to do. This happens not all the time that's why he was intrigued

  Hi Whitehawk07,

  ·        What is you receive the exact error message?

  ·        Who is the service pack installed?

  1. make sure that you close all applications and programs that you run before turning off the computer.

  2. you can also disconnect any external devices like printer, fax machine, connected to the computer and check if the problem persists.

  3 start the clean boot computer and check if the problem still persists. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7.

  Go back with the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get error 0 x 80070005 when you try to update my music or video Apps in Windows 8.

  When I try to update my music or video Apps on the Store Windows in Windows 8, I get error 0 x 80070005.

  Hello

  There are a few things you can try to help fix the error 0 x 80070005.

  First of all, you can run the troubleshooter Apps in case there is a problem within the app itself.  Please click on the following link to run it:

  Troubleshooting applications

  You want to make sure that Windows is completely updated and working properly by running the Windows Update troubleshooting tool.  Please click on the following link to run it:

  Windows Update Troubleshooter

  I hope this helps!

• Satellite P30 seems to completely charge the battery only when the unit is turned off completely

  Hi, I have my Toshiba Satellite p30 and only works on battery. This unit operate on sector or only on the battery as after the period of time go down the warning, then closes. The orange light fades in and out, but seems that it will only fully charge when the unit is turned off completely.

  I only just received this unit so bit of a novice.

  MASH

  Hello

  normally, the battery should always charge until it is full when the power is connected.
  If you have an orange light flashes, it means that something is wrong. Maybe your battery is faulty or something else. This should be checked by a technician.

  Good bye

• When I update my ipod touch iOS 9.2.1 my wifi stoped working

  Hello
  I update my ipod touch ios 5 9.2.1 after my wifi no longer works. even in the Control Center bar wifi icon has disappeared.

  Have you tried to reboot the iPod at least?

• Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think.

  Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

  CBTEKRONY wrote:

  Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

  What is this error message that you receive? This would help a lot. From there, a person must be able to provide some additional troubleshooting steps.

• get a message that firefox is outdated, but when you try to update the download is the same version on mac os

  get a message that firefox is outdated, but when you try to update the download is the same version on mac os. The version is 34.0.5. As soon as I run the brwswer, I get the update message.

  Your list of details of the system shows a user agent which has been modified by the Fast Browser Search (FBSMTWB):

  • Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6. en-US; RV:1.9.2.13) Gecko/20101203 Firefox/3.6.13 FBSMTWB

  You can remove possible user.js and numbered prefs-# .js files and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox