When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

Similar Questions

• "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

  Hello!

  For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

  It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

  My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

  Here are more details, where they can help in the diagnosis of my problem:

  • ID of the system board: 30BB
  • Type of processor: Genuine Intel(r) CPU T2250
  • Processor speed: 1730 MHz
  • Total memory: 1024 MB
  • Video memory up to: 128 MB
  • BIOS version: F.06

  Here's the entire message to the blue screen:
  - - - - - - - - - - - - - - - - - - - -
  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
  - - - - - - - - - - - - - - - - - - - -

  I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

  Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

  With great appreciation for your time,.
  Damaya

  Quick suggestion

  Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
  Good luck

• A problem has been detected and windows has shut down to prevent damage to your computer.

  I was playing a game when the error occurred.

  Here's the Stop error message:

  The problem seems to be caused by the following file: nv4_disp

  STOP: 0X000000EA (0XFFB86980, 0XF9694CBC, 0XFFA9F318, 0 X 000000001)

  I have Windows XP Home Edition. Please do not hesitate to request additional information. Not really good at this. But I don't think that this problem can be with the video card.

  Please provide additional information on your system:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If your system works fine, what do you think might have changed since the last time it worked correctly?

  Can you make the system crash when you want
  ?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

  Now provide more information about your system and data against more recent accidents.

  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt
  .  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).
  While you wait, please follow these steps:
  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

• Error: Windows has shut down to prevent damage to your computer to the Windows XP computer.

  Original title: can not start at all, even to repair cd.

  Hello
  After what was perhaps an overheating issue on my satellite daughter'sToshiba pro (she watched 2 movies wrapped in duvet, grrr...), windows (xp pro sp3) encountered problems resulting from the inability to start. I tried to boot from the cd, but it returns error msg (after starting to load) that "windows was arrested to avoid damaging your computer. What now? Of course, she did not save its files (I bet it will be next time :)) can I recover using my desktop pc, where I can find how?.) Any help much appreciated.
  Peter

  Hi Peter,.

  You can follow this link & check if the problem persists:

  You may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e"

  If this does not help, you can contact the manufacturer of your computer for help:

  http://www.Toshiba.com/Tai/support.jsp

  Hope the helps of information.

• I have a blue screen at startup saying a problem has been detected and windows has shut down to prevent damage to your computer

  then, it is said if it is the first time you've seen this stop error screen restart your computer if this screen appears again follow these steps, disable or uninstall any antivirus protection disk defragmentation or backup utilities, check your hard disk configuration and search for updated drivers, run CHKDSK/F to check for hard drive corruption, and then restart your computer. technical information :* STOP: 0 x 00000024 (0 X 00190203, 0 x 00000000, 0X85AD1EF0, 0XC0000102)

  You should try safe mode and see if that works too

  to start in safe mode turn off your computer and turn backon wile it's turning on press F8 repeditavely until you see windows, advanced startup options and then use the arrow keys to select Safe mode and press ENTER, and then press ENTER again. then do a virus scan and check your drive for errors by clicking Start > run, type cmd press enter then typechkdsk /f /r c: and plan for the next reboot

• A problem has been detected and Windows has shut down to prevent damage to your computer"(blue screen)

  He pretty much only happens when I watch videos! I was wondering is there as a driver, I need to install, and there is no reason why it should do, there is no event of virus when im watching videos!

  I have a

  -Windows Vista

  -32-bit

  -Dell computer

  Video uses a lot of pc, memory resources... To a lot of use of the video, the video card must have

  min 256, most of the new cards have 1 GB, & use memory ddr5. The memory of the pc must be maximally

  outside, 2 GB min, in addition, have a 2nd HD for storage of video/audio & 3rd party software releases C:

  Moreover, chk you page file setting, R.click my computer, properties, advanced, settings, swap file, change

  button. C: set to "let the system manage", click on set 2 X, restarting the pc fence... If a slave HD has been installed, a

  He would set to same.

  Only page file parameters can / could fix youre problem

• new GPU CPU RAM Motherborad everything on windows 7 wont boot in to windows at all when I turn on the screen of my power light then goes right (windows error)

  new GPU CPU RAM Motherborad everything on windows 7 does not start in Windows at all when I turn my power on the screen on then turn past directly to (windows error) I hit normal windows startup then goes to blue screen I tried safe mode, safe mode with netowrking, last know good configuretions and it stil goes to blue screen and again once it restarts please help fix this problem some

  Here's my Spece if necessary
  OS-Windows 7 Home Premium 64-bit
  Intel Core i5 processor 3570 k @ 3.40 ghz
  RAM-8 GB
  Graphics Card-MSI Nvidia Geforce 660 TI 2Go ECA
  Motherborad-H77MA G43 (Gen3)
  PSU - XFX Pro 750W Brozne Edition (Real Gamers Easy Rail)
  Hurricane box-Cyberpower (Black ATX) side Pancel Galss with blue lights)
  Monitor-LG W2340 HD 1920 x 1080 60 hz (DVI - D)
  Keyboard-Xtreme Gear (large buttons)
  Mouse-Xtreme Gear
  Here is ok all my spece pc I hope who help im going to call MSI and Cyberpower on this problem also if needed

  If win is an oem version supplied preinstalled on the PC, its coastline to the origonal material.

  If this is a start of commercial version full victory since the win dvd and see if a repair install works

• Get the blue screen error saying windows has shut down to prevent damage to this computer

  My sons computer is BLUE with a message saying that windows was arrested for not to damage your computer. And it is stuck on that screen. Do you know why windows shuts down his computer?

  * original title - my son computer is blue and a message indicating that windows has stopped to avoid damaging his computer. And he is not able to do anything. Do you know what it is? *

  Hello

  1. what operating system is installed on his computer?
  2 did you the hardware changes to his computer before the question?

  Perform the steps in the article and see if the problem is resolved or not.
   

  Resolve stop (blue screen) error in Windows 7

  Also check the event viewer for error logs

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)?

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Call the scam; Error message "fault had been detected between windows 7 and Chrome.»

  * Original title: is 1866 324 6719 call a call scam?

  I was working in Chrome and suddenly the computer started beeping wildly and I got a message that a malfunction has been detected between windows 7 and Chrome.  IT gave a number without charge 866 to call and said not to stop the computer or my operating system is compromised.  And it will allow me to close the window chrome.  My gut says it of a virus, but want to be sure before we do anything.  Course of windows essentials security scan now.

  It's a scam call caused by malicious software (which is a nuisance rather than a threat). Do not call this number and in no case give some foreign to your PC access.

• Windows Tablet 8 - music stops when I turn off the screen; where is the setting to change this?

  I have a Samsung ATIV (XE500T1C-A04US). I'm listening to Spotify. I press the tablet on the top to turn the display off. The music stops. Yes, I KNOW it's because of the system from going into standby mode, so I thought there must be a way to change this.

  I scoured for any type of option settings because I thought that surely he was not forgotten. My initial guess is that it is a kind of power setting. But after that several Google search AND the search here on this forum, I can't find yet another question about it.
  If you know something, let me know. Thank you very much!

  Here is another solution, at least for Surface Pro 2:

  -action close the lid: do nothing (on battery)- so you can always put in standby via the power button;

  -put the computer to sleep: 4 hours, or whatever;

  -turn off the display: after 1 min.

  I am currently using this workaround solution and at the moment it works.

  (I use the built-in music app, I do not know if it works on portable Office)

• Just in case my MacBook pro is off. When I turn on the screen becomes black and a folder with a question mark symbol starts to Flash. ¿Anyone know what to do?

  My MacBook pro retina just turned off. whenever I try to turn it back on, a black screen with a folder symbol and a question mark starts blinking. Can anyone help please?

  The? a mark indicating that it cannot find your hard drive. Sounds like your hard drive is dying/dead. You have a recent backup?

• In Windows 7 LPD printing service is off and when I turn on the feature, get an error has occurred, and LPD print Service remains.

  Had the Toshiba laptop for 6 months and the printer works fine.

  Then the printers not available error.  Go to control panel, programs and features, select nfeature.  LPD printing service and were all two Port LPR OFF monitor.  Able to turn ONE monitor Port LPR, but when turn characteristic on printing to LPD, a message service, an error has occurred.

  Fixit printer running tool does not help.

  Hi Surfa,

  Thanks for posting in the Microsoft Community Forums.  Be assured that we will do our best to answer the question.

  According to the description, you can not enable LPD printing service in Windows 7.

  Please follow the steps to solve the problem with LPD printing service:

  Method 1: SFC Run scan into the computer

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows system files

  http://support.Microsoft.com/kb/929833

  Method 2: Enable the LPD service:

  1. Select Start, Panel of.
  2. Select "Programs" in the Control Panel window.
  3. Select "Activate Windows features turn on or off" in the Group of programs and features.
  4. The user account control system will be asked permission to continue. Click on the "Continue" button.
  5. Displays the Windows features window .
  6. Expand the item "Print Services" .
  7. Place a check next to 'LPD print Service' and click the 'OK' button. Windows Vista will install and enable the LPD services for you

  Method 3: Temporarily disable the security software and firewall settings and check if the Internet connection drops.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See the article:

  Network printer problems

  http://Windows.Microsoft.com/en-CA/Windows-Vista/troubleshoot-network-printer-problems

  Note: Article applies to Windows 7.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

• Get the error that Windows has shut down to protect my computer

  Original title: A problem has been detected and Windows has shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe.MEMORY_MANAGEMENT.

  I have a strange problem, whenever I have shut down and restart the system I see some file interupting it to start again.

  The name of the file causing the bluescreen ntkrnlpa.exe & cdrom.sys.

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  The problem seems to be caused by the following file: ntkrnlpa.exe.MEMORY_MANAGEMENT.

  Can you tell me what needs to be done to stop this problem to happen.

  I have 3 GB of RAM. My computer does not have extra ordinary anythiing who are likely to consume memory. Help, please.

  Full path:-C:\Windows\minidump\Mini102411-01.dmp
  Description of the file:-NT Kernel System &
  Bug string: MEMORY_MANAGEMENT
  Caused by Driver: ntkrnlpa.exe

  See you soon,.

  Boumediene.

  This looks like one of your modules memory failed. When you run the memory test, did you select extended test? If you did or not, I highly recommend using MemTest86 + at http://www.memtest.org.

  If it goes, try to go to the web site of the manufacturer of your hard drive, download their diagnostic tool and run all tests on your drive. Do not tun Analyzer Windows disk that will do nothing for you.

• Turn off the screen without home (800w)?

  I miss my 650 feature when I'm in an application and press the power button, the screen would just turn off. With the 800w, the unit displays first screen today, and a second pressure is necessary to turn off the screen. It's two presses it and sometimes extra work to get back to running my application. Solutions or workarounds for this?

  That should do it.  Scroll to view #33.

  Message is about: Treo 800w (Sprint)