When starting lightroom on the new drive 6 I get error - cannot find solution

Similar Questions

• I Photofunstudio 8.0SE but when I try to run it, I get error "cannot find MSVCR71.dll.

  I loaded Photofunstudio 8.0SE leave a DVD. When I try to run the program I get the error message "Cannot find MSVCR71.dll" I ran SFC but always this error message. Should I try downloading the file from the internet, if so where? Thank you Al7 I forgot to say that I am under windows7 64 bit

  Hi Al 7.

  There are several different ways that msvcr71.dll errors may appear on your computer. Here are some of the most common ways that you can see msvcr71.dll errors:

  • "Msvcr71.dll not found."
  • "This application has failed to start because msvcr71.dll was not found. Reinstalling the application may fix this problem. »
  • "Cannot find [PATH] \msvcr71.dll.
  • "The msvcr71.dll file is missing."
  • "Failed to start [APPLICATION]. A required component is missing: msvcr71.dll. Please reinstall [APPLICATION]. »

  Msvcr71.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.

  The context of the msvcr71.dll error is a key piece of information that will be useful while solving the problem.

  Cause of Msvcr71.dll errors
  Msvcr71.dll errors are caused by situations that lead to the removal or corruption of the msvcr71 DLL file.

  In some cases, the msvcr71.dll errors might indicate a problem of registry, a virus or malware issue or even a hardware failure.

  How to fix Msvcr71.dll errors
  Important: do not download msvcr71.dll from a website "Download DLL. There are many reasons why a DLL file download is a bad idea. If you need a copy of msvcr71.dll, it is better to get it from its original, legitimate source.

  Note: Start Windows Mode without failure to complete one of the following steps if you are unable to access Windows normally due to msvcr71.dll error.

  1. Restore the trash msvcr71.dll. The simplest possible cause of a "missing" msvcr71.dll file, it's that you deleted by mistake.

     If you think you've accidentally deleted msvcr71.dll but you already emptied the Recycle Bin, you can collect msvcr71.dll with a free file recovery program.

     Important: Recovering a deleted copy of msvcr71.dll a file recovery program is a smart idea if you are convinced that you have deleted the file yourself, and that it was working properly until you did.

  2. Run a scan for virus/malware from your whole system. Msvcr71.dll errors may be related to a virus or other infection of malicious software on your computer that has damaged the DLL file. It is even possible that the msvcr71.dll error you see is related to a hostile program who is posing as the file.

  3. Use the system restore to undo recent system changes. If you suspect that the msvcr71.dll error was caused by a change to an important file or a configuration, restore the system could solve the problem.

  4. Reinstall the program that uses the msvcr71.dll file. If the DLLS msvcr71.dll error occurs when you use a particular program, reinstall the program should replace the file.

     Important: Do your best to do this next step. Reinstall the program that provides the msvcr71.dll file, if possible, is a likely solution to this DLL error.

  5. To update the drivers for hardware devices that might be linked to msvcr71.dll. If, for example, you receive an error "the msvcr71.dll file is missing" when you play a video game in 3D, try to update the drivers for your video card.

  Note: The msvcr71.dll file may or may not be related to video cards - it was just an example. The key here is very attentive to the context of the error and troubleshoot accordingly.

• Roll back a driver to a previously installed version if msvcr71.dll errors started after the update of a particular hardware driver.

• Run the sfc/scannow command System File Checker to replace the copy of msvcr71.dll missing or damaged file. This DLL file is provided my Microsoft, the System File Checker tool should restore it.

• Install the available Windows updates. Several service packs and other patches replace or update some of the hundreds of distributed Microsoft DLL files on your computer. The msvcr71.dll file could be included in either of these updates.

• Test your memory and test it on your hard drive. I left the majority of troubleshooting equipment at the final stage, but memory and hard drive of your computer are easy to test components are more probable that could cause msvcr71.dll errors because they do not.

  If one of your tests of hardware failure, replace the memory or replace the drive hard as soon as possible.

• Repair your Windows installation. If the msvcr71.dll file individual troubleshooting tips above fails, perform a restart or a repair installation should restore all Windows DLL files to their working versions.

• Use a free registry cleaner to fix msvcr71.dll issues in the registry. A free registry cleaner program may be able to help by deleting some registry entries disabled msvcr71.dll that might cause the DLL error.

  Important: Rarely, I recommend the use of registry cleaners. I've included the option here as an attempt to 'last resort' before the destructive step to come up next.

• Perform a new installation of Windows. A clean install of Windows will erase the entire hard drive and install a fresh copy of Windows. If none of the above steps fix the msvcr71.dll error, this should be your next course of action.

  Important: All the information on your hard drive will be erased during a clean installation. Make sure that you have done the best possible attempt to correct the msvcr71.dll error using a troubleshooting step before this one.

• Troubleshooting a hardware problem if any msvcr71.dll error persists. After a clean install of Windows, your DLL problem may be hardware related.

Applies to
The msvcr71.dll error message could apply to any program or system that could use the file on any of the operating systems of Microsoft Windows 8, Windows 7, Windows Vista, Windows XP, and Windows 2000.
Msvcr71.dll questions?
That a community of computer supported the help of enthusiasts! View the details of your question msvcr71.dll in the Microsoft Community. Don't forget to let us know the exact msvcr71.dll error message you see, and what measures, if any, you already have to solve the problem.

• When the sign out of hotmail get error cannot log out of facebook

  A statement appears when I log into HotMail, who said that they are unable to disconnect me ssl.facebook.com/accept_token.php. As far as I can tell, I disconnected from FaceBook or I'm not in it.

  Try the next thread that is specific to your problem (it's exactly the same problem) and offers a number of solutions that may work for you:http://windowslivehelp.com/thread.aspx?postid=235e9ce9-6529-4d80-8541-27882eb0d5ac#235e9ce9-6529-4d80-8541-27882eb0d5ac.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• How to reconnect to Lightroom 5 files on the new drive?

  I'm on a Mac and have been store that all photos and Lightroom work on an external drive. Just bought a bigger external drive and copied the entire content from the old drive to the new, including my Lightroom folder with all its subfolders. I have the new drive appears in the left pane, under 'files' and I thought I could just pick up where I left. But my folder structure does not appear, and I can't access my images. How to get reconnected to my Lightroom structure on the disk?

  Hi johnz5519,

  Please take a look at the following article: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  It should be useful to reconnect files in Lightroom.

  Kind regards

  Tanuj

• Cannot transfer Time Machine backups on the new drive

  I store my backup Time Machine on a Seagate 1.5 TB drive when the drive starts giving errors.  I had files on this computer and was able to transfer all except for 2 who were on unreadable sectors.  Fortunately, one of these files was an older archived version that I could afford to give up and the other was a temporary file in the photo library and since all other items were okay, I think I'm good.

  The problem came when I tried to transfer my Time Machine backup of 800 GB for a new disk.  When I copy and Exact-paste (cmd-opt-shift-v) the Backups.backupdb to the new drive, it gets the extent of November 23, 2015 and then dies because reports of the Console to the system, it gets an IO error when you try to read:

  /Library/SystemMigration/history/migration-245250B6-4F52-4FBB-BD61-546A8C19CCD5/ QuarantineRoot/private/var/db/dyld/dyld_shared_cache_x86_64

  in the relevant backup.  And because it's an IO error it simply abandons the whole process so I have no backup from November 23, included, for now.

  Because the disc is unstable, I wasn't able to use disk utility to make repairs on it.  The disc is what is and I have to deal with the mess, that I do not have the disorder, that I would have.

  I tried to manually place the missing files in the database, but the operating system will not let me.  I want to just copy my backup / OS X stop abandonment and be more like Windows and give me the options to "try again" or "fail" instead of just quitting!  I mean, why should I lose my backup all hierarchy of 23 November and beyond, simply because you cannot read a file, a file that I could simply replace in the backup of the current version or you can just ignore it.

  I tried to copy files on and setting xattr on them to be backup items, but they are wrong.  I tried chflags parameter to make the writable directory, but it does not work.  I can't copy the missing files to fix my archives.  Help.

  Please, don't try to transfer backups of a failed drive. Placing the disk aside until you don't know no longer you need the data, then delete and recycle. Start a new backup set on the new drive. For more security, you always have more than one backup.

• Satellite L655-1GN - failed to install the new drive HARD original recovery image

  Hello

  Just had to buy a new hard drive and put the latter with the former. I already checked that he was the same size and SATA as the original hard drive. When I tried to start a new installation of the operating system from the recovery disk (that I bought the Toshiba provider in my country - MAFIL), the boot option was not available.

  MAFIL representative told me that the recovery disks only for the reinstalliation of the OS on the original drive, but are not suitable to install a fresh copy again. So, how can I install my Win7 64-bit, with all settings on the new drive and Toshiba apps?

  Thank you
  Tomer

  On many models of laptops different change HARD drive or upgrade can be done by the owner of the laptop and after doing this, you can install recovery image using the disc of recovery without any problem.

  I did several times on different models of Toshiba laptops. This works.
  I really don't understand how someone can give you this information.

  By default the BIOS settings, restart your machine and press F12 at startup. When the boot menu appears on the screen put the recovery disk ODD news, select CD/DVD as a boot device and press ENTER.
  What happens when you do this?

• HP Color LaserJet CP2025n Prin: I need to download the older driver because a program does not work with the new driver

  Where can I find the olderdriver that I can use windows 64 bits 10,

  because a program does not with the new driver.

  The year may be 2014 or almost.

  Your Timo

  @tisalmet

  Thanks for the reply with the details,

  You can activate the Device Manager to view hidden devices by following the steps mentioned below:

  To work around this behavior and display devices when you click Show hidden devices:

  1. Click Start, point to programs, point to Accessories, and then click command prompt.
  2. At a command prompt, type the following command and press ENTER:

     Set devmgr_show_nonpresent_devices = 1

  3. Type the following command a command prompt and press ENTER:

     Start devmgmt.msc

  4. Troubleshoot the devices and drivers in Device Manager.

  For more details: click here

  Uninstall all software and drivers for printers:

  When you need to uninstall a driver completely, the best and safest method is to use the uninstaller of the device (if it has one). If you have added the device to your system with a Setup program (as is the case with most of the graphics card and sound card drivers, for example), you can uninstall it as you would any other program.

  1. Click Start, type uninstall program, and then press enter.
  2. In the uninstall window, which appears, scroll through the list and find your device or drivers. Double-click the entry to start the uninstall process.

  Sometimes devices will not have an uninstall program or the uninstall program will not appear in the list. In these cases, you can use Device Manager to remove the driver completely.

  1. Click Start, type Device Managerand press enter.
  2. Find and double click on the category of the device you want to uninstall (for example, the graphic card would be listed under display card) driver.
  3. Right click on the device, and then click Uninstall.
  4. Windows prompts you to confirm the removal of the device. Click OK to remove the driver.
  5. Once the uninstall is complete, restart your computer as soon as possible.

  Once the above steps are done, click here to download the full software features for your printer and follow the Setup process to start to use your printer again.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Error-insert the disc when try to open the flash drive.

  Original title: why connect my USB drive as an external drive.

  When the flash drive is plugged into the USB port, it seems that it will be added as a flash drive, but then the following equipment added window indicates that an external hard drive has been added.  When I go into windows Explorer to open the drive in Explorer mode, it says to insert the disc.

  Hi JimScottATO,

  We will try this.

  First of all, make sure that you are connected under an administrator account on your computer. Then plug in your USB key.

  Click START then right click on my computer , then click MANAGE

  In the new window, click MANAGEMENT OF DISKS

  Find the name of your flash drive and right click.

  Click on the letter of change of road and railways

  And then change the drive letter to something not already taken by another drive on the computer, such as "x" or "v".

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• Is it possible that I can get the new drive with Windows 7 activation of work without having one installed beside it?

  Hi, I bought a PC with Windows 7 pre-installed, refurbished but the case has a product key for Windows 2000, because he's company ex machine that has been upgraded. I installed a new hard drive and to keep my files, I copied all of the old disk to the new including the operating system. It worked well for a while, but I'm now getting the message "this copy of windows is not genuine". I found the product key of the old drive, but when I enter it on the new one it always says that it is not authentic. Is it possible that I can get the new drive to work without the one installed beside it?

  Original title: activate windows 7

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  What's the relationship between activation and genuine Windows?
  http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-Windows

  What is the validation, and how does it work?
  Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
  Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvista

  Authentic Microsoft software program privacy statement
  What data is collected?
  http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement

  - Product key numbers and letters .

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• PSE 8 fails to run on the new drive hard iMac after Time Machine backup

  I had to have my iMac drive replaced the week last in the replacement of the Apple program. After installing the new drive, I restored the whole Machine on the new drive Time backup. Most things work perfectly, but I get an error message when I try to run PSE 8. The error is 150:30 of error indicating "license has stopped working". I tried a number of things to correct this as described in http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html, but found that most of the FlexNet referring to article data does not exist on my machine, so I am unable to complete the recommended steps (I did the hidden files visible). Also the Flexnet files do not appear on the backup volume. When I try to reload the software with the original disks I have just the player to make some noise and then eject it. All the other CD/DVD to work as usual. Very welcome ideas

  Download PSE 8 on trial download site and use your current serial number to activate it:

  http://prodesigntools.com/direct-download-links-for-Lightroom-3-and-Photoshop-elements-8.h tml

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download on this site.

• How to import bookmarks to an old win / win wqhere FF installation failed. New victory and FF install the new drive. Old files

  Old installation of Windows and where winning FF stopped working. Have reinstalled on the new drive win and FF and import bookmarks from the old install on the old disk. The files are always accessible. None of the listed options explain another FF FF import that create a new profile that will not work in this case.

  Just as a reference, when you explore your old hard drive, will seek you:

  E:\Users\yourusername\AppData\Roaming\Mozilla\Firefox\Profiles

  (the drive letter may vary)

  If Windows hides the AppData folder on the old disk, you can disable hide files and folders: http://windows.microsoft.com/en-us/windows/show-hidden-files

  Then you can get off and find the folder bookmarkbackups containing .jsonlz4 files.

• Satellite Pro M70: Where to find the new driver for intel 915GM

  I downloaded the new driver for the chipset intel 915GM, and when I install games doesn't seem to work properly, that is to say he's going to choppy when you move the mouse over the buttons.

  If I go back to my old driver, everything seems fine. I don't mind using an old, I'm just confused why it will not work properly. The Readme file included with it just confuses me, but it says something about the installation of a patch for its hi-def?

  Hello

  I have the same unit but with inside ATI graphics card. Sorry if I misunderstood something, but why you want to install driver chipset? Must the chipset driver be updated until you try to install the graphics driver?

  In any case I recommend you to use only the designed Toshiba chipset driver. It is tested and adapted for this hardware platform. I'm not 100% sure but I assume that your graphics card is with shared memory. Am I wrong?