When the file transfer will be used to send a message?
HelloI think I know that a message is sent only through file transfer if the message size is greater than 75% of the capacity of IPC queue; file transfer would never be used in response to a deadlock situation that arises because of the number of messages that are exhausting the capacity of the queue (this will result in a failure immediately if TPNOBLOCK indicator is used, or else a failure response when the timeout is reached).
You get the following message in the ULOG:
"TMQUEUE.4288.3081606848.0: LIBTUX_CAT:1285: WARN: tpreturn message was blocked, try file transfer.
I'm just assuming it of because of the size of the message, or is it something specific to the operations of TMQUEUE? If we're not my understanding of how the drive transfer can occur, please put me straight!
Thank you
Malcolm.
Malcolm,
Tuxedo will use file transfer, if
(a) the size of the message is greater than 75% of the total capacity of the queue.
(b) the original msgsnd() fails with EINVAL. (Some operating systems have a parameter to the kernel configuration MSGMAX limiting the size of an individual message that can be set less than the total capacity of the queue. If an application tries to send a message larger than this size it will fail with EINVAL).
(c) the original msgsnd() lock will fail with EAGAIN and the message is sent by tpreturn(). (This is the case where the LIBTUX_CAT:1285 is connected).
(d) the original msgsnd() lock will fail with EAGAIN, TPNOBLOCK option is not set, the original message is more than 500 bytes, the TMNOTHREADS environment variable is not defined on Y and the message is not sent by certain system threaded process who are still single.
For gateways to field only, the transfer file in case (c) can be avoided if GW_FILETRANSFER = OFF is set.
Kind regards
Ed
Tags: Fusion Middleware
Similar Questions
-
No error response from the server when the file transfer
Hi, I just changed my Web site a server based on windows to linux. I was not in trouble, and now I can't get my files to load on the server. I contacted the server provider who has tested the things to their end and say that the problem is with dreamweaver. This is the message I get...
n response o server when the transfer of file... reconnection.
It is said that it is to put the file, and then I get this message again...
no response from the server during the transfer. 2 attempts. Retry or cancel?
If I hit Cancel, then he starts to put the file and it will sometimes, sometimes not.
Now, if I managed to pass the file, when I post it on the web and click on the link it says the file is damaged or corrupted.
Someone has any idea how to solve this problem? I'm new to web design and dreamweaver and I thought that maybe the problem is related to the definition of my site, but I don't see that there is a problem. I noticed that before I changed the definition of site for the linux server I could easily preview my pages in the browser without having to post it on the site. Now when I try to preview my page it says that I have to put on the site to view. Which could be related?
I work on a Mac and you have not installed a firewall.
Any help is very appreciated!
Thank you!
In the Site settings (Advanced Mode) it is an option when configuring the remote for passive mode FTP connection. Try to check that box and see if you are able to connect.
-
Best rendering parameters of the files that will be used in the PPr
Z820, Win 7 HP, Adobe production suite CS6.
I'm eager to make 'temporary' files that will be brought back right into legacy or placed in PrPro for final rendering for Youtube or Vimeo. I hope that by making components for comps that I'm not going to change, I can speed up the editing process, but she wondered if I could be implemented myself degrading images because of the multiple times between washing, so to speak.
I wonder what the best rendering parameters choice is if I'll be crossing output another iteration or after effects or PrP before the final product?
Comps are set at 1080 p, 29.97 FPS.
Output is t H.264 @ 1080 p, 29.97 FPS.
Jeff
The concept to make some elements that are locked to be used later in your comp is called before rendering. It's actually a lot. If you display a file without loss (such as Quicktime with the PNG codec at high quality), it will be 0 loss of quality.
-
It would be fantastic if when save my emails on my computer the file name can be customized to be something different than just the title of the message. As I suggested in the question, if it could be set up to be "date, time, sender, title" that would be great, much assistance during the passage of a .eml files between colleagues, or just simply organize your emails into folders. Is this possible and if yes, how does one?
Install ImportExportTools then adjust the Options (see photo).
http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html
-
The file transfer will be simple to the old version of CS6?
I've been using DW MX 2004 since 2004 although and now think about CS6. But the transfer of files from the old version to the new is going to be no problem? I notice that CS6 has a liquid layout and think how will react to my existing models.
In addition, DW MX allowed me to use the software on the PC and laptop one of the licenses, it would still qualify anyone know? I would not be the only user and the software would never be executed simultaneously on both machines.
HTML is HTML, so DW will have no problem reading or using your old files, including your old template files (although the template syntax has changed dramatically - I forgot whether to automatically update your models DW). You install the CS6 on the same computer running MX2004? If so, then your sites should transfer as well. But just to be safe, you should use website manager in MX2004 to export site definitions of ALL your sites (including the FTP information) somewhere safe on your computer so that you can then import these definitions in CS6. Files in your sites themselves will not be affected by this update.
CS6 is VERY VERY different than MX2004. You must make a fair knowledge of HTML and CSS to the table when you use CS6. A lot of things you could do in MX2004 will require the use of CSS in CS6. CS6 is also very focused on valid HTML, and you need to bring a few of such knowledge too.
-
Original title: computer viruses.
If I have a virus and I restore my computer, the virus will come back to the computer when the files are restored.
Hello
to be Safe side scan always media files are on before you reinstall your data
using drives flash etc is a well known to transfer viruses, etc.
-
How to use the file transfer Wizard
I have and old Dell XP and I am go buy
new Dell with Windows 7. I'm going to
disconnect the old computer and with some help
Setup new computer using Dell Windows 7.
I want to save, copy and install My Documents,
My computer, email, and Favorites in new
computer. I tried the file transfer Wizard and
the choice of external hardware is a floppy disk.
I would like to record information about a cd, if
possible, and when I get the new computer installation
that's when I purchase. I'm not
technical savy. Could someone please help.
Thank you. Judy
The Complete Guide to Windows Easy Transfer - video
Carey Frisch
-
I have download an IDM software.there are as many files how can I understand that by running the file IDM will install in my computer and I can use it.
Hello
Contact the Support of IDM in this regard.
The link there is a Support tab on the top right > run the mouse cursor over them for the Support Options > 'how to use IDM.
http://www.internetdownloadmanager.com/download.html
See you soon.
-
Right mouse click when the file name of MS Explorer results saying that he has encountered a problem and will stop, and it stops quickly.
Right click issues are usually caused by a third-party software that put an entry in the context menu. You can solve this with the free ShellExView.
http://www.nirsoft.net/utils/shexview.html - ShellExView
Make a right-click is slow or weird behavior caused by context menus management - http://windowsxp.mvps.org/slowrightclick.htm
Manage the entries in context menu for folders, readers, and the Namespace objects - http://windowsxp.mvps.org/context_folders.htm MS - MVP - Elephant Boy computers - Don ' t Panic! -
Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.
I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.
I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it. I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.
Can anyone help?
Hello
This error may occur for one of the following reasons:
The file is currently in use. Close the file and then try again.You are not allowed to access the location where the file is stored.
Follow these steps to grant all permissions in the folder where the files are stored:
1. right click on the folder on the external drive and click Properties.
2. in the Properties window, click on Security tab.
3. now, click Edit , and then click Add.
4. now, type everyone in the box and click OK.
5. check the full control box.
6. click on apply and then click OK.You can also try the mentioned below as follows:
1. click on start.
2. go in Control Panel.
3. Select "SOUND".
4. double-click on speakers.
5. click on the tab advanced and then uncheck the enable audio enhancements.Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I tried to save JPEG images after making a few changes to Photoshop CS4. For each file, I get the message "cannot save (file name) because the file is already in use or left open." I checked my apps and nothing is running would be to use the image. Can someone look over my EtreCheck and tell me if there is something current funny? I'm working on hundreds of images, so just change the name is slow and heavy work around. The problem seems to have started after update 10.11.
Thank you!
Description of the problem:
Photoshop will not save modified files
EtreCheck version: 2.1.8 (121)
Report generated on May 30, 2016 to 19:09:40 PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click on the links [click for support] to help with non-Apple products.
Click on the links [click for more details] for more information on this line.
iMac (27 inch, mid 2011) (data sheet)
iMac - model: iMac12, 2
1 3.4 GHz Intel Core i7 CPU: 4 strands
12 GB of RAM expandable
BANK 0/DIMM0
OK 2 GB DDR3 1333 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1333 MHz
0/DIMM1 BANK
OK 4 GB DDR3 1333 MHz
BANK 1/DIMM1
OK 4 GB DDR3 1333 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac, 1920 x 1080
OS X 10.11.5 (15F34) - time since started: 3 days 10:0:4
Hitachi HDS722020ALA330 disk0: (2 TB)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 2,00 (1.46 free) tuberculosis
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
OPTIARC DVD RW AD - 5680H
Logitech USB receiver
Computer, Inc. Apple IR receiver.
Card reader Apple
Apple Inc. FaceTime HD camera (built-in)
Seiko Instruments Inc. SII Smart Label Printer 450
EPSON EPSON scanner
Nikon LS-5000 ED
Seagate FreeAgent 1 TB FW
EFI (disk1s1) < not mounted >: 210 MB
back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)
EFI (disk1s1) < not mounted >: 210 MB
back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)
Western Digital my book 1140 3 TB
disk2s1 (disk2s1) < not mounted >: 210 MB
Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
disk2s1 (disk2s1) < not mounted >: 210 MB
Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)
disk2s1 (disk2s1) < not mounted >: 210 MB
Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)
Apple Inc. Thunderbolt_bus.
Any where
/ Applications/Toast 8 Titanium/Toast Titanium.app
[no charge] com.roxio.BluRaySupport (1.1.3) [click for support]
[no charge] com.roxio.TDIXController (1.6) [click for support]
/ Library/Application Support/Avast/components/fileshield/not signed
[loading] com.avast.AvastFileShield (3.0.0 - 10.10 SDK) [click for support]
/ Library/Application Support/Avast/components/proxy/not signed
[loading] com.avast.PacketForwarder (2.1 - 10.10 SDK) [click for support]
/ Library/Extensions
[no charge] com.LogMeIn.hamachi (1.0) [click for support]
/ System/Library/Extensions
[loading] com.logmein.driver.LogMeInSoundDriver (1.0.3 - 10.5 SDK) [click for support]
[no charge] com.seagate.driver.PowSecDriverCore (5.1.1) [click to support]
com.siibusinessproducts.driver.SLP [no charge] (1.1) [click for support]
/ System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns
[no charge] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [click to support]
[no charge] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [click to support]
[no charge] com.seagate.driver.SeagateDriveIcons (5.1.1) [click to support]
Demons of launch system problem: ℹ️
[failure] com.apple.logd.plist [click for more information]
[loading] org.postfix.newaliases.plist [click to support]
[no charge] com.adobe.CS4ServiceManager.plist [click to support]
[no charge] com.avast.secureline.update - agent.plist [click to support]
[no charge] com.avast.secureline.userinit.plist [click to support]
[no charge] com.avast.update - agent.plist [click to support]
[no charge] com.avast.userinit.plist [click to support]
[operation] com.carbonite.launchd.status.plist [click to support]
[loading] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist [click to support]
[failure] com.adobe.fpsaud.plist [click to support]
[loading] com.avast.init.plist [click to support]
[loading] com.avast.secureline.init.plist [click to support]
[loading] com.avast.secureline.uninstall.plist [click to support]
[loading] com.avast.secureline.update.plist [click to support]
[loading] com.avast.uninstall.plist [click to support]
[loading] com.avast.update.plist [click to support]
[operation] com.carbonite.launchd.daemon.plist [click to support]
[operation] com.carbonite.launchd.monitor.plist [click to support]
[loading] com.carbonite.launchd.watcher.plist [click to support]
Mail request hidden (/ Applications/Mail.app)
iTunesHelper UNKNOWN (missing value)
Dropbox application (/ Applications/Dropbox.app)
Adobe Photoshop CS4 Application (/ Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app)
Screenhero hidden UNKNOWN (missing value)
Request for InstUtilLaunch (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)
Application LOGINserver (/ Library/Printers/Brother/Utilities/Server/LOGINserver.app)
AOUMonitor Application (/ Applications/ScanSnap online Update.localized/AutoOnlineUpdater.app/Contents/MacOS/AOUMonitor.app)
LogitechHarmony: Version: 2.0 - SDK 10.7 [click for support]
Web of Google Earth plugin: Version: 6.0 [click for support]
Default browser: Version: 601 - SDK 10.11
Flip4Mac WMV Plugin: Version: 2.4.4.2 [click for support]
CoolirisWebKitPlugin: Version: Unknown [click for support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]
AdobePDFViewerNPAPI: Version: 15.010.20060 - SDK 10.8 [click for support]
FlashPlayer - 10.6: Version: 21.0.0.242 - 10.6 SDK [click for support]
Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 21.0.0.242 - 10.6 SDK [click for support]
iPhotoPhotocast: Version: 6.0
AdobePDFViewer: Version: 15.010.20060 - SDK 10.8 [click for support]
JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK
Facebook cleaner
Latest news
1 - ClickWeather
Facebook Photo Zoom
Unplug
Ghostery
Dashlane
Amazon search discount
PriceBlink
WOT
AdBlock
3rd party preference panes: ℹ️
Flash Player [click for support]
Flip4Mac WMV [click for support]
TechTool Protection [click for support]
Skip system files: No.
Mobile backups: OFF
Automatic backup: YES
Volumes to back up:
Macintosh HD: Disc size: 2.00 TB disk used: 536,90 GB
Destinations:
Feedback Up [Local]
Total size: 999,86 GB
Total number of backups: 50
An older backup: 2016-04-06 19:21:02 + 0000
Last backup: 2016-05-31 01:28:34 + 0000
Backup disk size: too small
Backup size GB 999,86 < (disc 536,90 GB X 3)
By CPU process back to the top: ℹ️
100% CarboniteDaemon
3% WindowServer
Console 3%
hidd 1%
1% adobe Photoshop CS4
Top of the process of memory: ℹ️
Com.apple.WebKit.WebContent 696 MB
541 MB softwareupdated
Safari 503 MB
CarboniteDaemon 399 MB
348 MB mds_stores
Virtual memory information: ℹ️
1.59 GB of free RAM
3.24 GB of RAM active
6.54 GB RAM idle
1.51 GB RAM cable
GB Page-ins 212,57
Breaks in Page 443 MB
Please read this message before doing anything.
This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.
The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.
Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.
Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.
The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.
Test in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.
-
When the file is transferred to the complete PC in a record of data of Veristand Sessions?
Hello
I use the NOR - Veristand - Startand Stop Logging of data Sessions to initiate and conclude the backup on a RT of the data target.
I noticed that the actual target RT to PC data transfer is done once recording has stopped after the call to Stop Logging of data.
Is there a way to control or at least to check when the data transfer is complete?
I want to read and possibly to empty the contents of the newly created tdms file in another repository. For a large file, the transfer may take a few seconds, and no doubt my candidacy would open the file before he knew that the transfer was complete with all data...
I could check the file of course size and see if it continues to change... but there should be a better way to do it.
THX.
L
PS: another post on the subject is here, related to the use of UDP for data recording... But it's more for streaming, which is different than what is done about this post.
The API you're referring to the target data streams to be connected directly on the host computer. The only generated log files are always on the host computer. In addition, when the command Stop Logging is completed, you are sure that the log file has been closed and no additional data will be get connected to it.
-
Original title: problem to copy content from your PC to external hard drive.
I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?
Concerning
Pete
The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time. When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.
I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start. Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has. The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).
If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary. That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.
It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything. You can get some imaging software of disc that will also help you.
It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).
I would work on figure our why your XP is paste and fix it in place. XP should not be sticky.
-
My Blackberry 9000 blackBerry smartphones starts after the file transfer has failed
Hello
I started to transfer a video clip using the Desktopmanager program, during the file transfer the when t PC standby and after that, the terminal is dΘmarre.
After removing the battery, it shows a white screen with a small clock and it is black; After removing the battery for 5 hours theink happening only is the redlamp is on during 2 to 5 seconds, then nothing.
I hope someone has a tip on how to solve this problem.
Thank you
Digger
Hello
I was unable to get any contact with my BB 9000 so I had to turn service.
Best regards
Digger
-
I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install
When you ask a question you will need to provide some basic information
Mac or Windows and EXACTLY what version of the operating system?
Recent Mac AND Windows operating systems have been known to cause problems "weird."
Using a full account of computer administrator with read/write permission?
Maybe you are looking for
-
Webroot ransomware all thoughts, please?
Hi people, I still read about it... do I need?
-
How to press several keys when asked [Ubuntu)
Hi all How should I do to be able to use a keyboard in a Skype-to-Skype call? The nine points button which is usually appearing in the basis of the appeal of windows doesn't work. I use Skype 4.0 for ubuntu 12.04 Thanks already, Jemdem
-
Need software that was on my laptop before my drive crashed
Presario CQ62 Product #XC434UA #ABA Serial No.{Removed privacy} Model #CQ62-231NR This laptop was purchased with Word, Excel, Publisher, and other software. Because I had to replace the hard drive all software was unrecoverable. How to replace the so
-
Transfer files to external hard drive, windows vista wmp library
How to transfer music files in the music library of wmp to external hard drive in windows vista?
-
My video files have disappeared.
I looked everywhere for them, I have tried the restore, I looked in the trash. I was I tried to move the 'Vidéos' folder in my Start menu and just be deleted by itself, but I lost all my videos in this folder, only most of them. Please help someone!