When the perforation in the logic does not record pre

Using logic 10.2.4

I have implemented punch and punch the locators.  I play with the track and making punch.  Logic doesn't store any roll before... .in other words if I try to expand the newly created region a little more early to catch a truck or something thing I got at the beginning, nothing is there.  I know logic is supposed to check in at the beginning just in case... there at - it a setting I'm missing? I tried the pre roll record and set at 6 seconds, but still nothing at start is saved before punch to the point.  Same thing in lieu or in creating records of decision-making.

The count and record Pre Roll above are mutually exclusive. They do not define how at the beginning of the recording begins, but rather where the playhead is set before the start of the recording. If you have a 2 count together bar and position the playhead at 10 bar, and then tap Save. Logic moves the playhead at bar 8, start playback (if there is something to play) and begin to check in at 10 bar. If you select a period of prefetching in a few seconds, the playhead will jump back 6 seconds instead of bars. Neither defines the amount of pre-roll advertising in the in the recorded real audio.

Auto Punch in is exactly that. When the recording start / stop. There is no registered pre-roll advertising. If you want the extra recording time before or after, then stretch the autopunch bar to make room for the start of start or end at the end.

You can also use take folders that might be a suitable replacement and allowing campers of any part you want.

Exception to this rule the there is one and will achieve exactly what you want - but it does not work with automatic punch. It is the punch on the fly...

prerequisites - you must have "quick fist blow" activated.

Press play and internally logical starts recording the moment where you press play, when you're ready to punch in, press R and you start recording, when finished, press stop. Logic recorded a region between the points where you started recording and click on stop. However, logic actually starts recording (under the hood) from the moment where you supported the play button, so if you look in the project tree, you can see the entire audio region with only set it collecting points as the region.

It's only this case that allows you to develop the region in time to include a part any audio region that was "pre" set registration points. It is in fact will contain the entire audio file as soon as the room was pressed to stop, even with quick punch point defined further in the song.

So say you have 10 bars - you start reading at the bar 1 and 5 bar you quick punch in bar 7 and you punch out. The defined region will show 5-7 bars, however if you develop the starting point of audio regions to the left - you will find that you have saved in fact all the way back to bar 1.

Sorry, this feature is not available if the autopunch is the method of choice.

Tags: Professional Applications

Similar Questions

  • Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

    Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

    If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

    You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • no service to customer without having to pay when the product does not work?

    no service to customer without having to pay when the product does not work?

    You will need to tell us more of the history for anyone to be able to give advice. The WHOLE story would be great!

  • How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

    Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

    I assume that you use a while loop to keep the updated value.

    Add a record to offset to your looping it initialize with a U32 (time in ms)

    Add the registry to offset to your loop that keeps the previous value of your bool

    When your reaches the threshold value => the light and set the current time in your shift register.

    In the next iteration of the loop weather check value is still above threshold

    => Y-online previous set to true?

    => Y-online the next iteration

    -Online N => turn switch on and set the current time in your shift register.

    -Online N => subtract the time current less time shift record-online more then 5 seconds?

    => Is => keep turning on

    -Online N => turn given

  • How can I click apply when switching back resolution lower when the window does not display the Apply button when

    How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low

    Hello

    Try pressing the ENTER key on the keyboard instead.

    See you soon.

  • event when the text does not fit in the field

    Hello

    When there is not enough room for the text in a field. Player will show a little "+". Is it possible to listen to this as an og event something similar?

    I have a field with room for 3 lines. If the user enters several. I need to supplement in anoter field.

    I sense that looking for the number of lines - I do a split for '\r' and get each row in a table. BUT the lines can be long, so just som enter 1 long line, my logic does not work. My policy is NOT monospaced, so I know how long a line!

    Let me hear if someone solved a case like this

    Thank you

    Thomas Groenbaek, Jyske Bank, Denmark

    If you check the box 'Time limit to the Visible area' on the ground, the complete event fires once the user fills out the field. You can put in a script like:

    xfa.host.setFocus (form1.subform1.overFlowTextField);

    in the complete event of the field with room for only 3 lines. Be aware though, that the focus change is not instantaneous and that a character or two could get lost, especially if the user is a fast typist. To make this work, you need to be "Limit length for area Visible" checked.

  • How can I reinstall windows xp when the computer does not start and there is no cdrom/dvd drive?

    I have an Acer netbook aspire one.  It will not boot past the windows logo.  I have a windows xp disc to reinstall windows, but the computer has no CD or dvd rom.  Can I copy cd of windows xp on startup SD memory card and reinstall windows?  Or can I run connect the non working pc a working PC to access the cdrom on the work pc to reinstall windows?

    First of all, you are mistaken when you say that the PC does not start.

    This is clearly starting. The problem comes from Windows, not with the real PC. It's actually a very important distinction!

    There are methods to repair Windows, but they can be a bit tedious. By all means, follow the advice given here to do if you're so inclined.

    If you would not rather to repair Windows (and I think it's interesting a try) or your repair attempts are unsuccessful, apparently, you would need to use an external optical disc drive and follow the instructions here:

    http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  • Display shuts off when the load does not load.

    Hello

    When I plug my video in the charger or the USB port to charge, it seems to turn off. The screen, which normally indicates that it is charging, turns off automatically and it will not charge. I tried to reset it by pushing the switch in position without success.

    Any ideas?

    Thank you!!!

    Hi again,

    A little more info...

    He plays very well, and the screen is there.

    The computer does not recognize it.

  • Whenever I have check the box to save my e-mail address when you sign in, it it does not record the next time I visit the Windows Live Hotmail.

    I checked the save my email address box, but it does not record

    original title: can not enter hotmail sign to save my e-mail address

    Hello

    As the issue is specifically related to Windows Live Hotmail, I suggest that you post the question on the link provided below for assistance.

    Hotmail Portal

    http://windowslivehelp.com/product.aspx?ProductID=1

  • How can I set at the point when the [key does not work because I have a German keyboard?

    Hi, I'm new to CS6 and worked through the book of Adobe After Effects. Some of the shortcuts do not work for me, probably because I use a German keyboard. In Chapter 11, I have problems because I need to select a layer, go to a specific time and then set to the point, but the [key does not work. Does anyone know a German equivalent or another way to set the point to? Otherwise, if I look at the colored bar in the timeline representing the layer that I want to put a point, can I get the same effect by dragging the edge of the colored bar until I reached the time limit? Or that fails to preserve the relationship of all images existing keys, etc. that I have implemented for a layer in a way that the [key would be? Grateful for any advice.

    Shift + o/a, o/a and so on. Also kann man mit Sttrg + shift + D die ebony einfach und den Teil parts, den man nicht parish, löschen. Ansonsten einfach evil die die Shortcuts.txt Datei deepening und oder das KeyEd Up Script dafur use squad.

    Mylenium

  • Restore windows files when the connection does not work

    After an accident at some point, I noticed "Restore to folder windows when connecting" did not work.

    In "Folder Options - view" it is checked.  Also, I did 'Restore Defaults' and rechecked it.

    Confirmed also with regedit it wasHKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\PersistBrowsers set.

    Another user on the system do not have the problem.  How can this be corrected?

    Concerning

    Ray

    Raymond,

    What is the version of Windows installed on the computer?

    I wish that you perform a scan of System File Checker-

    https://support.Microsoft.com/kb/929833/en-us

    If it does not then, I would have you decant the contents of the user account to a new user account this account is possibly corrupt.

    Refer to this article-

    http://Windows.Microsoft.com/en-CA/Windows/fix-corrupted-user-profile

    Thank you.

  • What do you do when the application does not work and app builders email address is invalid?

    I downloaded an app, after hearing it on the radio I thought it was an amazing idea, come to find out it doesn't work. I went to the app, went to their site, it would not allow me to register and the email address they provide is an invalid address! Is it possible to stop this company to make money from a product that does not work? The app is the music + storm edge Apps LLC

    https://iTunes.Apple.com/kN/app/the-music+/id713689980?Mt=8 has a link to their Knowledge Base support > http://support.stormedgeapps.com/support/home

    https://stormedgeapps.com/ has a link of support as well which leads to the same place

    I can't find "support email address.

  • How to join start in safe mode when the mouse does not work?

    (I'm on another computer to ask this question). I'm in safe mode; mouse does not work; arrow keys work but don't go to 'start '. How to get started?

    Assuming you have the office showing with all applications minimized or closed, Tab or F6 should pass the Start button and a few other "elements" on the taskbar.  Look closely and you will see a light preview highlighting of the selected item.  Press the Enter key to activate it.

    In XP Safe Mode, the cycle is start button > Quick Launch toolbar > [of any application taskbar icon] > clock > desktop icons.  While the Quick Launch toolbar is highlighted, the arrows move among the icons in the QL toolbar.  While the desktop icon is highlighted, the arrow keys will be touring all the desktop icons.

    Have a look here--> http://support.microsoft.com/kb/301583

  • How can you download pro Prime Minister when the icon does not exist in the clouds? [was: pr]

    How can you download pro Prime Minister when the iucon doesent exist cloud?

    In order to download the software, your computer must meet the system requirements to run the software.

    http://helpx.Adobe.com/x-productkb/policy-pricing/system-requirements-Premiere-Pro.html http://www.Adobe.com/products/premiere/tech-specs.html

    The usual for not being able to download reason is that Premiere Pro (and other video applications such as After Effects) are 64-bit only what they need for a 64-bit computer and a 64-bit operating system.

    If you use a 32-bit computer and operating system, and then you see the icon of Premiere Pro as the software will not work on your computer.

  • I have a software key, where can I download the programme when the machine does not have the status of a CD

    I have a software Key, where can I download the program when the machine has no status of a CD

    You can download the appropriate software from here if one of them is the program you are looking for:

    Acrobat X, XI | 9, 8 | 7

    Captivate: 8 | 7 | 6 | 5.5, 5 | 1

    Contribute CS5 | CS4, CS3 | 3,2

    FrameMaker 12, 11, 10, 9, 8, 7.2

    Lightroom 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)

    Photoshop elements 13, 12, 11, 10 | 9, 8, 7

    First items 13, 12, 11, 10 | 9

    Suites and programs CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 , CS4 Web Standard | CS3

Maybe you are looking for