When the small screen, the left side is out of the page. It started today. I have Windows Vista.
I have a 15 inch screen. When I use a smaller screen, say 10 or 14 inches, the demi-pouces left does not appear. It started today. I have Vista. I have not had any problems for 2 years before today with this machine (HP).
Hello
You did changes to the computer before the show?
Method 1
I suggest you try the steps from the following link:
Get the best display on your monitor
http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor
Method 2
If the steps above fail, I suggest you to update the drivers for the graphics card from the manufacturers Web site.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
Tags: Windows
Similar Questions
-
You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help
diana73,
First of all, make sure that you're connected Administrators account to do.
How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:
- Sign in as an administrator or as a member of the Administrators group.
- Click Start , click run and type compmgmt.msc .
- In the left pane, and then click disk management .
- Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
- Click change .
- Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
- Click Yes when you are prompted to confirm the drive letter change.
The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.
Good luck! Please rate me upward if you find my post helpful. Thank you!
-
why I can't download and save the files to my laptop... it disappears in the air... I have windows vista and ie8... Please help I'm going crazy... this laptop is my work tool... Thank you.
Hello locness2411,
Have you checked your download folder? Also you can put where you want to save a file to the desktop as, for example. Take a look at these links: http://www.tweaklibrary.com/Software_Applications/Internet-Explorer/27/Set-default-download-path-of-Internet-Explorer/10153/ or http://www.windowsreference.com/internet-explorer/how-to-change-the-default-download-directory-for-internet-explorer/ that can help you in what you want to change. Hope this helps you. Let us know anyway. Make it a great day!
"And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)
-
I had a power outage and when the power came back, the icon of the voice in the lower right corner (taskbar?) was absent. My computer (Toshiba Satellite P205-S6267) regulator dial is broken, so I can't adjust the volume without the sound icon. I have a sound icon on the left side of the taskbar, but it does not regulate the volume.
I have Windows Vista Home Edition.
All other icons that were previously in the taskbar reappeared once the power has been restored. I have sound, but I can't adjust the volume.
Hello
Try Method 1, or if necessary 3 method in the Information provided on the link vistax64.com.
"How to activate or disable the Notification area system icons in Vista"
http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html
See you soon.
-
HP Pavilion DV7-1020EA
Last update of BIOS/CMOS
Vista Home Premium 64-bit
Watermark factory recovery
All the appropriate HP update & Windows Update installed
Adobe Flash & Sun Java installed
Removed bloatware
Tried Msconfig and disable all startup with no improvement items
Intel Centrino 2
NVIDIA PureVideo HD graphics card
HDMI & eSATA
Problem: Booting into windows is OK a tad slow ish but it load the Office once it takes forever to load before you can get along with just about anything. As you can not connect to the Internet until the Office has charged. I don't think its something in the system tray causing lazy loading.
Any suggestions what to try please.
See you soon
Steven.
Hi Steven,
It should not perform the function of the buttons on the capacitive Strip if you disable Task Scheduler fast player - however another option would be to put the service to start manually instead of automatically when Windows starts. To do this, first enable the service from the msconfig services tab, apply the change and then reboot the laptop.
When windows has completely recharged (it will probably slow again), open windows control panel, open administrative tools, and open Services. Find the Task Scheduler player quick entry, right click and select Properties. In the drop-down list next to Start up type, select manual, then click on apply then Ok to save the change. Restart the computer for the change to apply and see if the time it takes to get a usable desktop is always good - if this is the case, then I'd leave the QPTS function defined in the manual.
Kind regards
DP - K
-
record in the query when the page load
Hi How can I make my block to query the record when the page load I don't have what it takes to press F11 + Ctrl I just what to load the data when the page loads for this field or block
I did it
create a LTRC of control block of data with the SERVERNAME element non-base
Give it a value in the a time-new-form-Forum
CGFK$ QRY_SERVER_TABLE(:CTRL.) SERVERNAME); and it works
-
original title: 'Open with' problem...
My office was attacked by malware. I have run virus scan and all updates that were available. When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.". There are recommended programs and other programs, but I'm fairly certain that none of them are correct. Can anyone help direct me in the right direction to solving this problem? Every program I try to open, translates into an opening by asking the same question, but the file name changes to whatever program I am trying to the window. Thanks in advance for any help.
Hello
Just in case there are persistent pieces of malware here is the method of complete elimination.
.exe question difficulty in the next message.Try Mode safe mode with networking - repeatedly, press F8 that you start.
The best two methods allow scanners to run and/or AV.exe out of the way or removing.
1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task managerProcess tab - complete the process on AV. EXE and continue with the uninstall Guide.
If necessary use start - computer or Windows Explorer to navigate to
C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.Right-click on it and rename it to ZZMbam.COM (or something different than now) and
Double-click it, and then run it like this. You can rename it back later. Do the same with
other programs according to the needs. Use this method to others as needed - NOT assume all
a program deletes all or that it is no other malicious software.---------------------------------------------------
2.
Another method is to use them:Use Process Explorer to "Suspend" the process will not stop
Then use AutoRuns to delete the malicious program startup items.
Now use UnLocker to delete the files in the malware.
You may need to do a file at a time.
Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxUnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtmlAV.exe
==============================================
The AV.exe malware goes by many names:
XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
antivirus, scams for you force to pay for them while they have no advantage at all.How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
Run them in regular Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
Use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
turn it back on.How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
-
Original title: registry exe problem
I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file. This also occurs when you download the software, which makes it difficult, because the file is not on the pc yet. All solutions?
Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
Moderator Forum Keith has a few suggestions along this line to
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.
Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
I hope this helps. Good luck.
-
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
(In the AutoPlay dialog box that appears when you turn on the DV camera, click importing video.)
It's # 2 on how to import the video but when I pluged my camcorder (Sony trv608) in my emachine (I have windows Vista Home Basic), nothing is happening... How to get my video on my computer and my video cam?... I also got told by sony I needed to cap analog, so I have I need to download something on internet even thought I have Director on my windows? IM so confused?Hi harleykristi,
Welcome to the Microsoft answers site!
Looks like the video camera (Sony trv608) is not compatible with windows vista, see the Sony link below:
http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=1452&MDL=CCDTRV608
() Vista drivers are not available)
You try to install the software that came with the device in windows XP service pack 2 compatibility mode. See the link below:
Run the program compatibility Wizard
1. open the program compatibility Wizard the by clicking the Start button, clicking Control Panel, click programs, and then clicking on use an older program with this version of Windows.
2. follow the directions in the wizard.
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
For more information, see the link below:
http://eSupport.Sony.com/us/Perl/model-home.pl?MDL=CCDTRV608&loc=3
You the best solution would be to check with Sony to learn more.
http://eSupport.Sony.com/us/Perl/contact-land.pl?MDL=CCDTRV608
Hope this information is helpful
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
signal no disconnection when the page is closed by the gesture of eye?
Hello
Falling on a particular issue... First of all, I connect my context object to signal a bit of javascript using the onCreationCompleted
onCreationCompleted: { // When the top-level Page is created, direct the data source to start // loading data MyObject.signal_1.connect(onJavaScriptFunction_1); MyObject.signal_2.connect(onJavaScriptFunction_2); MyObject.signal_3.connect(onJavaScriptFunction_3); }
So far everything is going well, but if I unplug these signals, the page is busted, so the next time that the page is created, these signals will be attached to the same javascript function once more and so on for every time that the page is re-created.
Then I thought, I should unplug these signals when the page came out... Therefore, I have given the NavigationPage because I couldn't see any signal onPopped or onDestroy... So I used the following code:
paneProperties: NavigationPaneProperties { backButton: ActionItem { onTriggered: { console.debug("Popping page, disconnect signals...") // Disconnect signals MyObject.signal_1.disconnect(onJavaScriptFunction_1); MyObject.signal_2.disconnect(onJavaScriptFunction_2); MyObject.signal_3.disconnect(onJavaScriptFunction_3); // define what happens when back button is pressed here // in this case is closed the detail page navigationPane.pop(); } } }
After testing a few creation of the page / page popping, everything works fine. Signal is attached only once. But every time I close the page by using the gesture of look, then I suddenly I begin to see multiple signals attached to my context object... as directed by the console log output:
emit > signal_1 onJavaScriptFunction_1() onJavaScriptFunction_1() emit > signal_2 onJavaScriptFunction_2() onJavaScriptFunction_2()
My questions
- Where can I sign out signals to avoid leaving the unwanted signals connection?
- All the QML object seems to have a signal of {onCreationCompleted}, is an onDestroyCompleted or something similar?
Thank you
Hello
There is no equivalent onCreationCompleted.
But you can set a JavaScript function such as
Page { function cleanup() { // disconnect signals here }
and call from NavigationPane onPopTransitionEnded:
NavigationPane { onPopTransitionEnded: { page.cleanup() page.destroy() // destroy the page if it was created dynamically }
UPD: another option is to use the element of connection of QtQuick. According to this thread, it works in Cascades:
http://supportforums.BlackBerry.com/T5/native-development/QML-connections-element/m-p/2063301#M9550
Connect/disconnect signals automatically, but I haven't checked this app cascading.
-
How to develop all the rows of the table of the tree when the page loads?
Hi all
I have tree than VO mere reference of table... I want to expand all table tree rows when the page loads... I already have initially developed property to true... but it only runs from first line of tree...
Any help would be great-Jey
In the backbean and that:
private RowKeySetTreeImpl ps = new RowKeySetTreeImpl(true); public void setPs(RowKeySetTreeImpl ps) { this.ps = ps; } public RowKeySetTreeImpl getPs() { return ps; }
In the jspx set table tree as disclosedRowKeys
-
Get the values of default table row when the page loads
Hello
I am running JDev 11.1.1.7. We have a page that contains two tables in a relationship of the master / detail of nickname. We can do a real master ADF / detail with view items related because the query for the 2nd table is complex and works best when queries with binding settings. The View object for the 2nd table has a request with 2 link params as it can get in the first table. Thus, when a line is selected in the first table we want to execute ExecuteWithParams on the object from view of the table 2. We do it in the Bean managed for the page in a method that is the selection to the first table listener. It works fine except when the page initially loads, the first line is selected by default. When the default value is selected the selection listener is not triggered.
I've seen the suggestion of not having a line selected by default when the page loads by removing the value selectedRowKeys on the table. However, we do not want that the 1st row of the table secondary master to be selected by default and we as the table of detail to show the correct corresponding lines.
Steve
Steve,
Not really sure when you say that the 2nd table is complex and may not use the master detail. If the settings link in the parent table, you can set the ViewLink accordingly and it should work, right?
In any case, if you're after the execution of methods on the loading of the page, you will find the links below.
If it's a working group, you can add a methodCall as activity by default and UTF, you can use phase listener (if listener server does not).
https://blogs.Oracle.com/aramamoo/entry/an_epic_question_how_to
It will be useful.
See you soon
AJ
-
How to keep the region selected when the page is sent
Hello
I created a page with several area equipped with a region selector.
When the page is sent, the region selector returns to 'show all '.
I would like to keep the selected region, but don't know how.
Any ideas?
APEX version: 4.2.6.00.03
Theme: 26
Best regards
Klaus
Hi Klaus,
Please follow the Blog solution
http://blog.theapexfreelancer.com/2011/11/sticky-region-display-selector/
Hope this helps you,
Kind regards
Jitendra
-
Hallo,
in a working group, I have a 'readonly' page that uses in many istances VO (for fields, tables,...).
When the page is loaded, I need to call its ExecuteWithParams operation for each VO.
I would drag / drop (cascading) the operation of each VO ExecuteWithParams in the workflow, but the problem is that I need to run logic to call.
For example, I have some cases in which I have to exec VO, and then pass the value of a field in the returned to the VO ExecuteWithParams, another record.
I guess I can't manage this 'declarative' in the taskflow but I use code in a managed bean.
So far, I've added for each VO ExecuteWithParams action page links.
I know I can use a code like this to call the ExecuteWithParams for each VO...
OperationBinding operationBinding = BindingsUtils.getBindings().getOperationBinding("ExecuteWithParamsToCall"); operationBinding.getParamsMap().putAll(paramsMap); Object result = operationBinding.execute(); if (!operationBinding.getErrors().isEmpty()) { return false; }
... but the problem is... where and when I call?
I wrote in the managed bean extended view a public function initPage() tha called the ExecuteWithParams.
How to use this function?
I can use it during the lazy fo page load?
Can I use it as a method call to place in the working group before the page? I have to admit that I already tried that way, but it did not work...
In addition, after calling a VO ExecuteWithParams, as I said before, I may have the need to treat the VO after his execution to gather values for some fields (I'll pass these values to the other VO ExecuteWithParams).
Can I access the iterator from the bean by using the iterator binding?
Thank you very much
Federico
Instead, I have to create it in the the methodCall1 pageDef?
Yes
And if methodCall1 calls - as in my case - the function of a bean that uses the ExecuteWithParams many istances VO... I create all the necessary links in the methodCall1 pageDef?
Yes
And Yes... Links ExecuteWithParams that I created in the page untitled1 aren't necessary?
Once again Yes (except if you do not have to invoke to untitled1 page)
If you have 2 minutes trying to download the app, so you'll have is that I was
I have more than 2 minutes (I hope), but I did not immediately jdev
Dario
-
Validation of required field only when the page loads (HR test case!) included
Hi experts,
Here you have a simple test for Jdev 12.1.3 HR case: https://dl.dropboxusercontent.com/u/18609389/TestHR.zipThe main.jspx is just a button which CreateInsert a record dept displayed in another page:
My problem is the following page (test.jspx) has this code to run when the page loads:
<af:serverListener type="onloadEvent" method="#{backingBeanScope.backinBean.onPageLoad}"/> <af:clientListener method="onLoadClient" type="load"/> <af:resource type="javascript"> function onLoadClient(event) { AdfCustomEvent.queue(event.getSource(), "onloadEvent", { }, false); return true; } </af:resource>
The code is simply this (now):
public void onPageLoad(ClientEvent clientEvent) { logger.severe("HR TEST....."); }
And that's the problem, required validation is performed.
Can you tell me why?
Thank you
Jose.
Don't know what is my mistake, but the code is of the actionListener button is not called. :-(
Well, you combined two different ways to do this (from my first answer).
If you are still reading this, you will notice "or" before the second suggestion
Thus,.
1. keep your clientListener under af:document tag
2. based on javascript, you find key (use: alert ("button");) to see if you have referenced correctly your button in findComponentById())
And then:
approach 1:
Use AdfActionEvent.queue (button, true); queue event on your action button and implement your logic in function attached to the properties of your 'actionListener' or 'action' button (if you don't need listener server in this case)
approach 2:
Use AdfCustomEvent.queue (button, "onloadEvent", {}, false); the queue onloadEvent on your button (in this case you need listener server attached to your button)
Dario
Maybe you are looking for
-
I tried with the left click of the mouse and then delete, nothing happens. I also tried with customize and drag them but no result. I use firefox version 31.0. Thanks in advance!
-
My daughter, I bought an iPhone 5 c 8 GB for Christmas, she is 9 years old and has created its own Apple ID through the iCloud but it is attached to my Apple ID and I get txt messages if she wants to take down an app that's 12 rated apple wonder if i
-
Is someone lost my favorites after the update?
-
WRT54G and WRE54G does not...
Hello I try to extend my network v1.02.7 WRT54G with an v3.04.01 WRE54G Expander wireless. SSID is disabled 128-bit WEP encryption Channel 6 on both devices Router IP 192.168.2.2 Subnet mask 255.255.255.0 router Start DHCP 192.168.2.100 IP (max 50) R
-
You can view a tv on a laptop W500 signal?
I know that the question sounds crazy - why would anyone want to do that? - but RockSmith, a guitar on our Xbox360 learning program, can also be configured as a relatively sophisticated (for the price) amp-more-effect-bridge which will mix our live g