Hello, I accidentally pressed several times the "New separator" button in the toolbar "tabs" and I can't delete them now. Help!
I tried with the left click of the mouse and then delete, nothing happens. I also tried with customize and drag them but no result. I use firefox version 31.0. Thanks in advance!
You have the bookmarks toolbar items in the tab bar?
Do you see the Manager of bookmarks (library) separators in the Bookmarks Toolbar folder?
Tags: Firefox
Similar Questions
-
Original title: outlook can duplicate the same messages from yesterday, and I can't delete them.
I use outlook express for my e-mail yesterday same emails keep coming, I tried to remove them, but can't everytime I open outlook I get the same
The other post:I opened outlook express the same messages from yesterday, continue to repeat every time error 0x800CCC0F had no new messages and I can't delete these messagesHi glendamcmillan,
You did it all change hardware or software on your computer before this problem?
You can follow this link & check if the problem persists:
Hope the helps of information.
-
I tried to load Flash Player on my XP computer but have of find undesirable equipped engines, namely Binkiland and Bing, neither of which I wanted to and I can't delete them because they do not appear in the list programs. Can you please help.
Hello Maria,.
Thank you very much for the link, which worked well. Some of the other times that I tried to load Flash Player were presented by the site and also the search engine. You will understand that I am not very computer savy!
Once again thank you.
Chris.
-
I deleted the files from my office, they are still there and I can't delete them again cos keep telling me to check the location and try again
Hi fwhaddad,
Please take a look at the spirit x possible 2nd answer in the thread for a solution:
-
When I press the 'to' on the e-mail domain, all my contacts appear. However, at the end of the show 5 contacts list that are not my contacts! I checked my list of contacts and they do not appear. So so I can't delete them. My question is, how to remove? I took a page if someone wants to see it. Any help will be appreciated.
I'm going to assume that contact names you see may be something you do not want to reveal, perhaps something like "Drunkgirlroom".
It is a waiting Group network Invitation causing your problem. To resolve this issue, you must decline the Invitation by following these steps:
1. click on Contacts.
2. click on discovers invitations.
3. click on groups.
4. click on No, thank you.For reference, see the following:
I hope this helps.
-
These files do not allow me the owner of this computer to support in the permissions area or allow me to delete them in windows safe mode. I also can't do anything with the permission of edition since the Trusted Installer is the only access to those files.
The file is Windows NT with two subfolders and I can't access or remove one of them.I want to delete these files to windows and my computer, how do I remove the Installer only access?I was finally power with some help of a video get youtube the answer that I need to take in charge and delete the files with out having to down load any software.
files are gone from my computer after using the edit view and change the file sharing, then enter the permissions and change permissions for folder with my user as owner.This non-greyed out the locked area to finally remove the files and allowing me to access the files.If you think that microsoft could have posted a simple is how its done.step by step. -
I install security updates and important. Sometimes in the same day, I wonder to install the same updates. When I check the history I see that they are already installed. This can happen several times in the same day.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
UTC/GMT is 00:34 Sunday, March 11, 2012
-
With the Firefox 4 RC, the 'open in a new tab' and the 'open in a new window' - buttons have changed places. This is quite annoying because I normally do without looking, but now it always opens in a new window instead of a new tab. Is it possible to restore it? Perhaps in your own settings?
You can use the menu editor extension to reorganize menu items - https://addons.mozilla.org/firefox/addon/menu-editor
-
Have (had) a file with multiple files it contains with pictures in each file. A week ago the pictures were there. Now, the names are replaced by wingdings as names and file extensions. When I try to open it, it is not accessible and that the file name, directory name or volume label syntax is incorrect. When I try to delete it, it says that the file name you specified is invalid or too long and specify a different name. When I try to rename it, it tells me that if I change the file name extension, the file may become unusable. If I try to change anyway, it says I've specified file name is not valid or too long. Only tried for the name 1. I did a restore in the case where a program interfered with that. However, nothing has changed. All of the suggestions.
You can download and try to delete the file Unlocker http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtmlwilh. Although it is not designed for this particular circumstance, it may very well work in all cases, as it has been very successful in a wide variety of situations are not specifically highlighted in the directions (where do not work the normal Vista options). NOTE: Some antivirus flag programs this program as a malware, but it is a 'false positive' and is safe to use perferctly. My own software to flag, but several other well-known software products it clean and the warning is included in the documentation of the program.
I wish there was a way to save the images, but at this point, it seems that the only option is to delete because you can't rename files EHF (if this option is available-I hope that work above). Unfortunately, System Restore does not affect the files of data, so even if a program caused this, System Restore can eliminate the cause, but it would not restore the files to their previous names.
If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky because they retain the files called snapshots http://windows.microsoft.com/en-AU/windows-vista/Previous-versions-of-files-frequently-asked-questions. It can be used to recover previous versions of files that have been changed or deleted accidentally. Here's how: http://www.microsoft.com/windows/windows-vista/features/shadow-copy.aspx.
If you have Vista Basic or Premium of Vista, you don't have a shadow, but there is a free program for you that does essentially the same thing called Shadow Explorer: http://www.shadowexplorer.com/. I suggest that you download and implement as soon as POSSIBLE to protect you if you accidentally delete or modify a file. It will not help you in this instance, but it can help save the next time.
I'm more concerned about why this has happened in the first place and prevent it from happening again. I saw file names change before, but never of wingdings which then do not let you open, edit, delete, or rename. We will check some of your system files: go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.
Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228. If you find any these corrupted files, try to post them here. Maybe we can replace the good files on the disc.
While in the command prompt, type chkdsk /f /r and enter and let it run. It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.
If this does not work, then please post repetitive errors in Event Viewer about the name change (Start / Control Panel / administrative tools / Event Viewer). Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.
If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone). Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884. Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work - but it will probably not fix your renamed files. You can have a lot of updates to re - install (including all you need to remove service packs). If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.
I hope one of these procedures can solve your problem. If this isn't the case, after return and we will try something else. Return message anyway so we know how it turns out.
Good luck!
Lorien - a - MCSE/MCSA/network + / A +.
-
I think there is a tool fixit for this, but I can't seem to access
Hi Bruce,.
You marked by mistake my answer as the answer (solution) to your question. I have not marked to avoid confusion.
I'm sorry that the tool has not worked for you. Unfortunately, it is the only such tool that Microsoft provides and supports right now. I have some alternative suggestions:
- Run system restore
System restore allows you to choose a date and a time and restore the program/system at this point. He won't touch one of your personal files/documents/images. Only, the process takes about 2 minutes and is completely reversible if you don't like the results. This is by far one of the safest and easiest options in a case like this.When you run the system restore and choose a time before the program was installed (which can be listed as a point of restoring specific itself, because the points are created just before to begin installing new programs), it will remove all registry entries or system files this program had done. This option is all but guaranteed.
or
- Manually remove all Traces
Delete all files in the created program and manually delete the registry entries. This can sometimes be simple, but for more complex programs, it can be nearly impossible without a complex program in question and detailed knowledge.
I highly recommend you try #1. As I said, you can always cancel it if you don't like the results. When you use it, please be extremely careful to choose restore, not refresh or reset. These two alternatives are not as 'safe', because they are destructive in nature and should be used only if you want to restore your computer to factory conditions.
- Run system restore
-
Hello. My 13 elements license allows installation on 2 computers. I use a PC and a laptop. I changed laptops (which was broken, new laptop is 100% same model laptop) and put the hard drive of the computer laptop old in the new. Elements says now, it is already activated on 2 computers when I enter the serial number. There is no way (except the cat from adobe, which is not available on weekends) to turn off the old (or all) computers to activate again the two computers?
If you must turn off and you can not disable, you must contact adobe via chat.
-
What is the prompt "Enter the Site password" and how can I make them disappear?
When using Dreamweaver (and in particular, every time I insert a picture) the following message appears:
I tried to enter any combination of name and password of the user, including my creative cloud login and computer account name and the password. Nothing works. Fortunately, the pop-up disappears if I click on the 'Ok' or 'Cancel' button, but it started to become a nuisance. He did not appear for the first 2 months I used Dreamweaver, but only began to appear a few weeks ago.
I do not work on projects or sites which have a password protection, or grabbing images off FTP servers or something like that. I have not all sites listed in the window "Manage Sites". I don't work out my inetpub/wwwroot folder, as requested by the people of my work.
Any help?
Check all of your IIS files (inetpub / and below) for all of the .htaccess files. I could do this through Windows Explorer (not Dreamweaver), making sure to check for hidden files.
If there is nothing there she probably tries to include the contents of a directory somewhere check password protected if your site code (including all includes, CSS, JS etc.) to all external links. If necessary the links on the comment one and try the site again.
-
Good day, notification of save my icloud does not close. I pressed the bottun close several times, but he's still on my screen. How this can be fixed.
Restart the device - without loss of data
-
The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when you select the particular model.
The problem does not appear, if PH 13 items is run in administrator mode.
The available computer resources are rather big enough: INTEL CPU i7 4 cores, 16 GB RAM, 1 TB HDD + 32 GB SSD, Windows 8.1.
Please, advice how to fix this problem? Perhaps, there is patch or update available?
I had this problem with some of the choices menu in PSE13 when my drive to work was only a SSD with 53 GB of free space. I assigned a second disc of work (my data disc with ~ 2 TB of free space) and the error disappeared.
Scratch disk settings can be found under preferences / Performance.
-
Hello! I tried several times to download a trial version of Adobe Acrobat Pro, but I get this message, "installation of Adobe met an unexpected failure. Please try again. If it persists, please contact Adobe. »
uninstall all versions of acrobat and reader.
If win, clean it by Download Adobe Reader and Acrobat tool - Adobe Labs
Restart your computer
replace.
Maybe you are looking for
-
Why the Troubleshooting tab keeps re-appearance?
For some reason, when I use Firefox, I get multiple instances of the tab notes of FireFox and the FIrefox Troubleshooting tab. How I got these tabs to prevent reappear and permanently? Thank you.
-
I have trouble getting accurate readings of my components 1001/1102/1303 thermocouple. I have 10 channels attached to the device. All values are not accurate and are negative (in the-300-400 range.) Moreover, when I unplug a thermocouple of its Pa
-
Automatic update because of problems with the USB ports.
After an automatic update this morning at 03:00 October 15, 2010 for windows vista, all my USB ports on my laptop have stopped working. Please advice all solutions to locate the update caused the problem.
-
My computer is slow. What should I do?
I have no problem when I have the eset anti-virus because it was only a trial and his already expired I uninstall and change in ZoneAlarm and becomes slow. What should I do?
-
I bought this printer not more than one year ago and, with the Windows 7 evaluation, was an indication that it would work after that I changed my Windows Vista. Now, I can not access the program through Windows 7 on this computer. HP even told me t