When viewing my page photo will close without my guest

Similar Questions

• How can I get rid of the security warning when viewing Web pages

  I recently received a security window pop-up asking if I want to view only Web pages delivered safely. How can I get rid of this and why I see this all of a sudden

  Hi Elizabeth,.

  I don't know why he suddenly began occurring - maybe it was an update or something you have installed.  It may be a corrupted system file or maybe even malware. It is very difficult to tell without extensive trials.  But let's focus on the most likely solutions.  Later, if you want to go back to the 'why', we can make some procedures to test potential causes (although if the problem is resolved, it can be very difficult to identify the cause because it can be fixed or repaired money) - but I'll be happy to go there with you, if you want to.

  In Internet Explorer, go to Internet Options / Security / Internet / Custom level / then highlight near the bottom in the section, until you get to "Display mixed content".  My guess is that it is defined at the command prompt (which is the window that you see).  You have three choices: you can leave things as they are on command prompt and decide in each case what you want to do (which is how I have mine set up - it really is not so common).  You can click on Enable and IE automatically displays pages with mixed content and no prompt.  You can click on disable and IE will display not these pages (and will probably give you a screen indicating the reason and you must then choose somewhere else to go or perehaps click on the back button to go to the page that brought you to this page to see if there is no indication to choose one type of content and avoid the problem (although I've honestly never seen such an option).)

  For what it's worth, I almost always approve unless I'm on an unknown site where I already feel uncomfortable for a reason-so I can choose to refuse to approve and give up everything I did and move on (but it happens so rarely I honestly don't remember not that last time who had held-) It has been several months at least.

  If this does not work (or it has not been set to prompt), do you know where this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.vistax64.com/tutorials/76905-system-restore-how.html.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re-install any software and updates that you have installed and uninstall any software that you have removed between now and the point of restoration, but you can use Windows Update for updates.

  I hope this helps.  If this isn't the case, after return and, if you can provide me with some links to these sites (I don't remember those where it happened to me) so I can further research and to test the results.

  Thanks and good luck!

• How can I transfer my whole photo folder and its contents on my external hard drive? And once there, when I upload new photos will automatically they on the external hard drive?

  I would like to set up my computer to save all my pictures on my external hard drive to free up memory.  So when I download new photos on my computer they will be sent directly to the external hard drive.  Also how can I send all my photos that I currently have on my computer to the external hard drive?

  I would like to set up my computer to save all my pictures on my external hard drive to free up memory.  So when I download new photos on my computer they will be sent directly to the external hard drive.  Also how can I send all my photos that I currently have on my computer to the external hard drive?

  ====================================
  You can copy and paste the files on your external hard drive.

  Right-click your folder of the image and choose copy...

  Right-click on the drive letter for your external hard
  drive and choose Paste.

  You can also right click on some files or folders and
  in the menu... Choose... Send to..., then select the
  Letter from the external hard drive.

  FWIW... the external hard disk file system
  must be NTFS if the files larger than 4 GB will be
  transferred.

• How to keep a user on 1 page when viewing multiple pages?

  Hi all

  Well first of all, I want to use before and after the image on my page viewer

  http://www.flashxml.NET/image-before-after.html

  OK, it was nice and easy to insert, but...

  I want to have about 10 different ' before & after viewers the image.

  Each with a lot of text above the image & under the image viewer.

  Here are the hardest part:

  I want to have 10 links towards the Viewer, on the LEFT SIDE of a page

  and when the user clicks on them, 1 of 10 viewers appear on the RIGHT SIDE of the page.

  If the user can click on all 10 links (or triggers) and the display of images going on to the next "before & after viewer.

  What I'm trying to avoid making the user to leave the page.

  I don't want 10 pop ups viewers or 10 different windows open for each viewer.

  The first solution that comes to mind is FRAMES (divide the page into two)

  but I heard that they are obsolete or NOT recommended

  MORE IMPORTANT

  Flash Pro is much too difficult for me to create this.

  I was hoping to use dreamweaver, or use a free template that would make what precedes.

  Thank you,

  Lou

  I use frames or framesets for obvious reasons.  But you can use an inline frame or iframe with links to the pages of each spectator.

  Iframe on the homepage:

  Links in the sidebar:

  • Viewer2
  • Viewer3
  • Viewer4

  Nancy O.

• How can I stop Firefox displaying Javascript/CSS inline when viewing the Page (CTRL + U) Source?

  Recently, I noticed that the Javascript and CSS files are shown online while you watch a page source. Is there a way to stop the Firefox to do this?

  Thanks for the test.

  When I try Reddit, this stylesheet is not inline in the page.

  I can't access/browsing Netflix, I'm redirected to a login screen. But it seems strange that when I try to navigate around Netflix, I'm still on HTTPS and you load on HTTP.

  This problem happens only in the pages of HTTP and not HTTPS pages?

  Is it possible that some sort of proxy or security filter modifies the page until it reaches your browser?

• When bookmarking a page Firefox will let me choose a folder I want to put in it, he puts it at the bottom of all my files instead?

  I can't bookmark a page where I want in my files, because firefox bookmarks it at the bottom of all my favorite folders instead of raising the little box and let me choose the files I want to put in... This just started last nite 12/02/13 and I haven't downloaded something else, like new software or whatever it is this week... help plz

  I took the easy way out by definition firefox to default settings and that fixed it... more he saved all my favorites... but I lost the url address box when I try he customized, so I put it again to return to the default settings and now it works fine... thx for the answer :)

• "To view this page, Firefox must send information that will repeat any action (for example, a search or order confirmation) that was carried out earlier."

  To view this page, Firefox must send information that will repeat any action (for example, a search or order confirmation) that was carried out earlier. Then I have to click on return or cancel. Then I have to click on return or cancel.

  How can I fix this automatically return?
  Please let me know!

  It is not possible.

  Do you use the back button to return to a previous page?

  You receive an alert to send POST data if you return to a page or refresh a page that was requested in advance from the server by submitting form via a (hidden) MESSAGE form data.
  Firefox can only make sure to get the same page send this POST form.
  Firefox doesn't know what it means shape data, so Firefox asks for confirmation before sending the form data so action can you take to repeat an action and buy another article or post a message once.
  One way to prevent this pop-up on the removal of the POST data is not to use the back button, but to open the links on a page that is requested from a server by sending a form with the date of the POST in a new tab (window) with a middle click or hold down the CTRL key and click the link.
  Then you can close the tab or window to go back.

• my lap top was close without warning or command especially when I watch movies online

  my lap top was close without warning or command especially when I watch movies online.i just ts will puff and must be reseeded again and again

  my lap top was close without warning or command especially when I watch movies online.i just ts will puff and must be reseeded again and again

  Looks like it's overheating.

  Use Bing or Google to search for information on your particular laptop (maybe the support forum for your Dell, Toshiba, HP, etc.) and determine how to combat overheating.  You may be able to 'fix' it's using compressed air to clean the vents and/or using a cooling pad under the computer laptop and even run a small fan external imed in the inlet.  May not be recommended by people IT but I often run my old laptop without battery to reduce heating.  And of course, you might have a fan does not properly.

  Doubtful that the malware is causing your problem.   You have every reason to think otherwise - no evidence of infection

  Kind regards...

• I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  -It used to work and for some reason, now it does not work

  Greetings, d_chiuch1104,

  There is one thing that I know that you need to check that COULD be your problem.  Open Control Panel (in Classic view) and click Folder Options (or, in Control Panel, click on appearance and personalization and then Folder Options).

  Open the view tab and make sure that "Always show icons, never thumbnails" is NOT checked.

  It would be good to hear from you as to whether that was the problem!

  GL - Bob

• I use Lightroom 5.7, 64-bit with Windows 7 Professional. Without apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now, I've noticed that my directory the files LR

  I use Lightroom 5.7, 64-bit with Windows 7 Professional. Without apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now, I noticed that my repertoire records in library view LR does not show images correctly: If there is a folder with subfolders, the folder contains 0 images, but sub records show the correct number of images. What happened and is there a solution? I tried to uninstall Lightroom and re - install, but the problem persists.

  Here is a screenshot of the error message:

  

  Post edited by: Joseph Costanza, Jr.

  See here for a solution.

• Hello, I have a Windows 7 Pc, where 5 Lightroom is installed.  When I opened a photo using "verkenner" I see a good color photo.  When I open a photo from Lightroom 5, the picture will be too dark. This gives the difficluties for the shaping of photograph

  Hello

  I have a Windows 7 Pc, where 5 Lightroom is installed.

  When I opened a photo using "verkenner" I see a good color photo.

  When I open a photo from Lightroom 5, the picture will be too dark. This gives struggling during the shaping of the photograph. Can someone help me solve this problem?

  Kind regards

  Marianne

  Hello Marianne,.

  I have something even. JPEGs are fine, naves are a few weeks ago 1.5 stop underexposed. It only happens with LR and Photoshop. Not with Nikon View or Capture. It only happenes when I use the d-lighting option active with one of my Nikon several. Is equivalent to your problem or is there something else?

  Erik

• If I exported my photos when I import them into another library of Photos, will they still be live photos?

  I plan to export my entire library of Photos on a hard drive, that I will then use import my library to another library of Photos on another computer (with the latest updates). When I export my photos (choosing File > export > export Photos X...), they will still be "live pictures" that is when I import them will be powered?

  For sure if you simply move a copy of the entire library to the new system, you will have all - export and import loses a lot of information and can lose quality if you're wrong - interconnect systems and drag the library photos of the current system to the new system images folder - or use an external hard drive to the Mac OS extended (journaled) format to move in all

  LN

• Use Peoplesoft 8 for our accounting systems and when I go to open a doc (tiff on a shared server file) link, it says that I am not authorized to view the page.

  Use Peoplesoft 8 and when I go to open a doc (tiff on a shared server file) link, it says that I am not authorized to view the page.

  You authenticate (log in) to access this TIFF file?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Kodak Gallery will close in July. How can I transfer my files to my photos?

  Kodak Gallery will close in July, how can I transfer my fplders to my photos?

  Unless you opt out... Kodak Gallery is planning to move all the photos from Shutterfly.

  See article:

  Kodak Gallery - Message from our Director...
  http://www.kodakgallery.com/gallery/LP/Shutterfly/index.jsp

  If you want to copy the photos back on your hard drive...
  see the following Kodak Gallery Help Center article:

  Uploading Photos
  http://gallerystudio.custhelp.com/app/answers/detail/A_ID/471

• How to configure Photo Viewer Windows as a program by default when viewing photos

  Using the default windows photo viewer

  My pictures are being opened in internet explore. I want to open with the windows photo viewer. I tried "open with...". "and select Photo Viewer. However it is not. I however it manifests when I right click and select Preview. I don't want to do this every time see a picture well.

  So, what can I do?

  Hi PFollansbee,

  It seems that the file association to open the images has been changed on your computer. I suggest you to set as default Photo Viewer to access photos on your computer and check if that helps you solve the problem.

  Try the steps below; It could help us solve the problem.

  1. open default programs by clicking the Start button.

  2. click on Control Panel, and then click default programs.

  3. set your default programs. This option allows to choose the programs that Windows uses by default.

  4. Select Windows Photo Viewer in the list and click Set this program as default.

  5. try to access photo and check if it opens with the Windows Photo Viewer.

  Also access the link below to find out how to define and modify your default programs.

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.