Windows Update Kb2686827 is continually offered by WU, even if it has already been installed

Similar Questions

• Why I repeatedly get a security update for Windows Vista for systems (KB2676562) and update for Windows Vista (KB2679255) focused on the x 64 even after that both have been installed successfully?

  update of security (KB2676562) has already been correctly installed 21 times, began towards the end of May.  Update for Windows Vista (KB2679255) was successfully installed 35 times, he began in mid-April.  These two continue to update themselves every day and do it at least twice a day, back to back.  It is very frustrating to have to deal with that and makes me think that something may be a problem with my computer.  I had heard of registry cleaners is not not a good thing to use, if recently I not unhooked my registry free cleaner.  I hope that it has not caused my computer to lose any registry key values.  Does anyone know a possible solution or what I need to do? I thank everybody help, please!

  Hollow salvation of the farm,

  Try these steps

  Method 4: Reset the contents of the Catroot2 folder

  go to start > all programs > Accessories > right click on command prompt > run as administrator

  Reset the contents of the Catroot2 folder. To do this, follow these steps:

  Type the following commands and press ENTER after each command:

  net stop cryptsvc

  MD %systemroot%\system32\catroot2.old

  xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2

  output

  Restart the PC and then

  Method 8: Rename the folder C:\Windows\SoftwareDistribution

  Rename the Windows Update temporary C:\Windows\SoftwareDistribution folder. To do this, follow these steps:

  Open an administrative command prompt window.

  Run the following commands and press ENTER after each command:

  Net stop wuauserv

  CD %SystemRoot%\System32

  Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

  Net start wuauserv

  Try to install updates again.

  also try to scan your computer

  Method 1: Use the Microsoft Safety Scanner to scan your computer for viruses and malware

  
  To analyze your computer by using the Microsoft Safety Scanner, click on the following link:

  http://www.Microsoft.com/security/scanner/ use the software to combat spyware and antivirus software to scan the computer.

  To see a list of third-party anti-virus software vendors, visit vhttp://www.microsoft.com/windows/antivirus-partners/windows-7.aspx.

  To download and install Microsoft Security Essentials antivirus software, visit http://www.microsoft.com/en-us/security_essentials/default.aspxc.

  Please come back if you need assistance

  Thank you

  Makoi

• Windows Update tries to install a fix KB951847 which has already been installed.

  I replaced my hard drive earlier this month.  During some updates Windows installs a hotfix has been installed KB951847.  Windows Update keeps trying to install the fix even.  It happens several times a day.  How can I solve this problem?

  • KB951847 is an option, not the security update: feel free to hide it.

    ====================

    1. stop the automatic updates service:

    Start > run > (enter) services.msc > [OK]
    Double-click Automatic Updates > click Stop
    (Stopping the service will take a moment)

    2 remove the contents of the download folder:

    Start > run > (enter) %windir%\SoftwareDistribution > [OK]
    Open the download folder and delete its contents
    Close the window.

    3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselect KB951847 and hide ("don't show me this update").

    4. start the automatic updates service:

    Start > run > (enter) services.msc > [OK]
    Double-click Automatic Updates > click Start
    (Starting the service will take a moment)

  • UTC/GMT is 23:11 on Saturday, August 27, 2011

• HP Envy 15: HPSA keep being invited to download the updates even when they have already been installed

  Hello

  I just run Windows Update 10 and everything went well.

  Then I had HP Support Assistant warned me that there are new updates for HP I did install, but now I get HPSA telling me that these updatesstill must be downloaded and installed again and again.

  Has anyone else had this and if so is there a fix for this problem.

  Kind regards

  Mike

  lms1953

  Personally, I don't trust HPSA on my PC Win10-implementation to date, so I removed it.

  My guess is that the upgrade has kept the old version of HPSA, and what MIGHT solve this problem is to delete that and replace it with a new version from here: HP Support Assistant | HP® Official Site

  If that is fixed, here are a few troubleshooting steps you can try: HP - HP Support Assistant (Windows, 10, 8) troubleshooting computers. HP® customer support

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Updates are available, even if they have already been installed

  Why updates for various applications are available for download and installation even if they have already downloaded and installed?

  This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data and read this message before doing anything.

  Triple-click anywhere in the line below on this page to select this option:

  /var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.* file should open with a selected subfolder. The subfolder has a long name beginning with "zyx" and ending with "68". Place this subfolder in the trash. Do not move other subfolders with similar names. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Can I reinstall my CD of Windows XP SP3 on a new drive hard if the one in that it has already been installed is lost or stolen? It will be always authentic?

  I bought a genuine Windows XP SP3 CD (french version), installed and activated, it after finding that the windows came with my computer was a fake. A few months ago my computer crashed, and my father has taken recently to his colleague to repair. The guy stole my hard drive and replaced it with another one cause it new, my father will not understand it, but I did it, the hard drive, he gave a our files, but it was XP in English and a counterfeit version. Applications of now facing guys have lost another, so I intend to install my genuine XP CD on a new hard drive, is this possible? I mean if I do that it will still be authentic or will know it must get another cd (again)?

  Thank you, any help appreciated.

  Hello Haby-Habbes,

  If you have real hologrammed CD and certificate of authenticity, so you have the Windows license.

  Install it on the new hard drive. Good advice on all XP themes, visit the http://www.annoyances.org/exec/forum/winxp

• On my new computer, Windows has already been installed. I want to return on Widows 7 8 unfriendly. Will I encounter difficulties unresolveable if I attempt it.

  In the process from windows 8 for windows 7, I can install windows 7, and then uninstall windows 8 without difficulty?

  [Transferred from Internet Explorer]

  The main point would be there there for Windows 7 drivers for your computer model. If it is of a particular brand then search the model on their web site and see if there is any what Windows 7 drivers listed. All devices need specific drivers but if some are listed then the system probably came out as a Windows 7 machine and should support the o/s yet.

  If it is a built clone system that is the system integrator themselves do not host Windows 7 drivers but the manufacturers of components of individual system such as the motherboard, graphics etc.

  Windows 8 Pro OEM has the right to downgrade, standard Windows 8 not so much would require the purchase of a license.

  Windows 8 also supports an option called Secure Boot that needs deactivation if implemented as Windows 7 does not work. It is a setting in the BIOS.

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• Windows Update has not been installed successfully in 8 months (error codes: 8007371B & 643)

  original title: Windows Update has not been installed successfully in 8 months

  Windows needs to install 7 updates each time I receive the notification. in any case, he attempts and succeeds only and him remains always fail. Those who succeed keep be redownloaded too, so I really have no idea if it's REALLY successful.

  Error codes:

  Code 8007371B

  Code 643

  And the last 4 are as follows:

  Code 8007371B

  The success is always to:

  A security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)

  Thank you

  -Mike

  Run the tool and then try WU.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

• Microsoft Security Essentials Client Update Package - KB2754296 has not been installed due to a file epp.msi missing in the network directory, anyone have this problem?

  When automatic update trys to install a Security Essentials update, I get a message saying that the update has not been installed and that the epp.msi file cannot be found in the directory.  I tried to uninstall security essentials and start the uninstaller on but could not find the file epp.mis as well.  The file simply vaporize?

  In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse

  Additional references may include:

  Checklist for installation of Microsoft Security Essentials
  http://experts.Windows.com/w/experts_wiki/89.aspx

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

• How to uninstall microsoft no product which has not been installed good product is intunemp3 (error windows cannot install acsess)

  I downloaded intunemp3 to get music, but it did not work properly so I tried to uninstall the product and all I get is (error windows cannot install acsess, this can happen if the installation program has not been installed correctly) and as it happened I met other problems which I think may be related to the first problem. When I use my system tools to defragment files, it only that Flash and never starts, when I try to download windows updates they fail.even when I try to run a security scan the sas error McAfee has encountered a problem please click Home and try again. can any body out there help me out?

  Thank you

  Donald

  Try to do a system restore: click on start, all programs, accessories, System Tools, System Restore.  Then choose the restore point from when itunes tried to install.  If this does not work, let me know and I can give you another way to do it.

• Windows cannot display the control of volume on the taskbar because the volume control program has not been installed

  Windows cannot display the control of volume on the taskbar because the volume control program has not been installed
  Why a how can I fix this is where, until I rebooted after a windows update

  Here is a link to try. Good luck: http://support.microsoft.com/kb/319095.

• iTunes has not been installed correctly. Error 7 (Windows error 126)

  I tried to update itunes and I get the following error. ---------------------------

  iTunes.exe - Unable to locate component
  ---------------------------
  This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem.
  ---------------------------
  Ok
  ---------------------------
  When I try to re - stall get the same error.
  ---------------------------

  iTunes

  ---------------------------

  iTunes has not been installed correctly.  Please reinstall iTunes.

  Error 7 (Windows error 126)

  ---------------------------

  Ok

  ---------------------------
   
  Original title: itunes problem

  Hello

  Uninstall everything according to the instructions from Apple:

  "Remove and reinstall iTunes and the components of the software for Windows 7 and later versions.

  https://support.Apple.com/en-AU/HT204275

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

  I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

  Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

  If not, try these standard troubleshooting steps.

  -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.