Similar Questions

• Private data LVOOP Parent returned when the child instance created from constant

  I created a parent class and child class.  For each of these classes, I created a member who is a builder, whose purpose is to initialize constants for each class and return the instance of the class VI.  I also have an accessor Member VI for each class that returns private data of the class (in this case, a single string for each class).

  Private class data Parent 'String' is set to "text Parent" as default.

  Private data of the class of the child 'Child String' are set to 'Child text' as a default.

  The Parent class constructor works very well.  For testing purposes, I'll be back the text of unbundling of directly the manufacturer VI, as a return of the VI accessor. The Parent constructor starts from a class constant.

  However, in the case the constructor of class as a child, if I start from a class constant, unbundling directly private data (using a feature of unbundling by name and choosing "Child String" as the element), I get the private parent data!

  If I use the Member of the class of the child VI to retrieve the text, I get the private data of the child.

  If I change the constructor from a class of control instead of a constant class, I get the private data of the child.

  This occurs only until the child class has existed as a control flag. that is, if I ungroup private data, after the class is returned by any Member VI, I get the private good child data.  Then, of course, something changes once the class 'data' has been a control at a given time.

  I'm using Labview 8.6.1, Windows XP

  I have attached a small project that demonstrates the problem that I encounter, without actually doing initialization, just read.

  Is this expected behavior?  Why does it matter if I start with a constant of class instead of a control of the class?  When you slide the block diagram in the project window, you will always have a constant.

  Although I was able to reproduce your problem in LabVIEW 8.6.1, it seems to work fine in 2009.  I could not find a CAR ID, but at this point I can only assume that the behavior was not intended but it is set in 2009.

  Let me know if you need me to find more details.

• I can't install Windows 7. It is said that "the installation program was unable to create a new partition system or locate an existing partition of the system", when I chose I have hard drive and my C: / drive is not there!

  I have 3 drives hard, but windows 7 install only 2 (im of a facility in xp) see of them. The strange thing is that it can not see my HDD with xp on?

  I tried to install it on others, but it says "Setup could not create a new partition system or locate an existing partition of the system" and hard drives are: 1 is logical, 2nd is system, 3rd is primary. WHAT SHALL I DO PLZ! I really need help!

  Hello

  I suggest you to see link below and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-create-a-new-system-partition/92c682dc-A759-49b9-A235-e84d13db6a96

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/9e18e169-f77e-4026-B22F-f602e670d55c

  Hope this information is useful.

• Oracle cloud virtual image, I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud... But could please at least use us dbconsole?

  On oracle cloud virtual, image I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud. But could please at least use us dbconsole?

  
  I tried to start dbconsole, and it did not work:

  [oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  
  

  According to the oracle help doc center - "creating a database on an instance of virtual image service" (http://docs.oracle.com/cloud/latest/dbcs_dbaas/CSDBI/GUID-29290A81-8798-4988-848E-77A1BE0CF08A.htm#GUID-4851560B-D4B6-42...)

  database was created with the option as:

  emConfiguration - NONE - storageType FS

  
  

  I guess we have to manually configure the em console, but when I tried to create it, he told me that "' Dbcontrol repository already exists." "

  When I try to start it, it exports the error

  [Oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  Could someone could give me help with this problem?

  
  

  Thanks Brian. I tried your command, and it works. Now I've encountered another problem, how can I browse the URL?

  I created the access rule for access remote on port 1521 and 1158. but when I try to browse the EM console URL, it does not work. all the configurations that I need to do?

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• How to make my email more small it is too big for my screen and it too far on the right, it is when I click on create mail and it's huge

  How can I make my smaller email is too big and it was too long on the right side, it is when I click on create email and when it opens I do not have the right of it

  You can move the window by grabbing the title bar at the top. Once you have a visible advantage, place the cursor on the right on that edge, left click and drag it to the desired size. First close all other windows and the latter so that Windows remember their size.
   

• Icons and links do not work, they all say .encre and get an error "to open this file, windows needs to know which file was used to create".

  I uninstalled a program a few days ago and I think that it uninstalled the things I needed. All my icons tell .lnk and a message appears that says "to open this file, windows needs to know which file was used to create it.  I can't access my add or remove program file.

  I can't delete email, a lot about different programs does not work when I click on them with my mouse.  I have windows 2005.  My PC is in good condition with a lot of memory left and I have antivirus protection.  Help?

  Hello

  I suggest following the link below and follow the steps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-file-associationunable-to-load-eg-vlcink/d14b86ae-b02f-40fd-bf3f-5bf7922f5542

  I hope that the above information is useful!

• "The instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. "when I go to create a new pdf of the file after the installation of updates

  Original title: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  I worked on a design project for a few days I made several pdf files from. During the night, Windows ran and installed the updates on my computer. (My design file was open at the time). Now, when I go to create a new pdf of the file, I get the following error code: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  HELP - I can't find a solution.

  Thank you!!

  Hello

  1. what program you use for your design project?

  2. did you run the repair of this program?

  Perform System Restore on the computer and check if that helps.

• When I try to create a restoration political group has disabled the option.

  I have never tried to create a restore point on the computer. I assumed that this was done automatically.
  When I tried to create that told me that group policy has disabled this option.
  I have this computer again, and it was never part of a network.
  This is a private computer and I am the administrator.
  Operating system is Vista service pack 2

  Hi Jackson,

  You can check out the following link and try the steps by Mouneshwar R, Support Engineer and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/system-restore-has-been-turned-off-by-group-policy/9505e5e8-37b5-440A-ad38-51a08720ac42

  Note: This link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, see the following link:

  Back up the registry

  Hope this information is useful.

• What has changed on my computer? I was able to create folders and can no more do this...

  What has changed on my computer? I was able to create folders and can no more do this... I have Windows 7 with Microsoft Office Home and Business 2010... before uninstalling some software yesterday, I could create a new folder. now I can create is no longer a new folder.

  How can I solve this problem?
  Thank you

  Hello Annette,.

  It is a problem for a long time under Windows 7. To solve it I recommend that you only install the following program - FileMenu Tools. You can download the portable freeware from here: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .

  After having downloaded and installed the program, you will notice that, by default, each option is checked. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.

  Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• When you try to create a system image, receive the error code 0 x 81000019

  Get the error code when you try to create a system image on a 900 + GB hard drive with 900 GB of free space. Keeps telling me that there is not enough space to create the image of the shadow. I'm trying the disk image has only 40 GB of data. What is going on? Using Windows 7 64 bit Pro.

  Many hours of searching the Web for answers about a year ago, said that relatively few people have this problem and proposed solutions in the forums have been complex, machine dependent and seem to fail for most of the people who have tried a fix...

  So when I gave up and called Microsoft... they told me to take my problem to anyone assembled my computer...

  The man who built my machine told me not to worry, simply store all my files on the cloud, as he does...

  So now I store my important stuff on a spare drive, we have installed in the box, go to live with the inability to make appropriate backups and restore points...

  All my old computers is standard backups without any hassle... Just this new machine with Win7.

  (The only "new" thing was a disc SSD C... can't believe it would make one difference either, other than speed... and many people use them in 2011...)

• Version of Photoshop elements Windows 14 - error when you try to create a Photomerge Panorama "documents must be registered before they can be merged. I tried a few of the fixes mentioned in these forums such as Edit-> Preferences-> general-> res

  We know the fix for the bug "documents must be registered before they can be merged" when you try to create a Photomerge Panorama in PSE 14?

  I think I have found workarounds to the question "documents must be registered before they can be merged" (no thank you lack of Adobe customer support):

  Solution #1

  My workflow template is to take pictures with my SLR and save on the memory in the form of RAW files, download the images on my PC, then open the RAW files in Adobe Camera Raw and then save the images to jpeg using PSE. I wasn't able to create Photomerge Panorama with jpeg images I've saved, but I was able to create Photomerge Panorama with the images I have saved IF I save as TIFF 8-bit files in EPS. A condition for this workaround was that I had to save the pictures at their original resolution and not at a reduced resolution.

  Solution #2

  If I have a right-click on an image and selected open with 14 and observed PES Editor (RGB/8) * to the right of the file changes its name, which means PSE think he has not saved to the file. The solution is to go to file-> Save-> Save (replace existing file-Yes)-> OK. You can then use this file and others you perform the same steps to create a Photomerge Panorama.

  Solution #3

  The way to save JPEG files in PSE is to go to file-> save for Web-> Save-> Save. The workaround is to select the file-> save for the Web and then check the box include the color profile , then click on save and then save again. Then I'm able to merge JPEG files using Photomerge Panorama and I don't get the error message "Documents must be registered before they can be merged". I looked back 11 of PSE that is still on my PC and found that the Embed checkbox color profile did NOT have to be checked to get Photomerge to work for jpeg files. So it appears with PSE 14 Adobe changed the Photomerge Panorama script to require the image file the color profile embedded in the image. If the color profile is not embedded, PSE think the image file has unsaved changes. BTW, this bug, or "feature" has not changed with PSE 14.1.

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

• Unrecognized field \"networkName\' when calling Cluster workflow create the VCO.

  Hello

  I use BDE 1.1 on vsphere 5.5. I was sent BDE VCO Plugin version 0.5.0.70. When I try run create a workflow of cluster based Hadoop of VCO, it fails with the error below. Can anyone help?

  Content the form of string: {"code": "BDD.} BAD_REST_CALL', 'message': "" has no REST API: could not read JSON data: unknown field \"networkName\" (class com.vmware.bdd.apitypes.ClusterCreate), not marked as ignorable\n to [Source: org.apache.catalina.connector.CoyoteInputStream@7e542721; line: 1, column: 578] (through the reference string: com.vmware.bdd.apitypes.ClusterCreate[\"networkName\"] ");" {"" nested exception is org.codehaus.jackson.map.exc.UnrecognizedPropertyException: unrecognized field \"networkName\" (class com.vmware.bdd.apitypes.ClusterCreate), not marked as ignorable\n to [Source: org.apache.catalina.connector.CoyoteInputStream@7e542721; line: 1, column: 578] (through the reference string: com.vmware.bdd.apitypes.ClusterCreate[\"networkName\"] ")"}

  Thank you and best regards,

  Nanga

  Hi dvnagesh,

  Assume your msg is for BDE 1.0: "networkName": 'nw1 '.

  The equivalent in BDE 1.1 should be: 'networkConfig': {'MGT_NETWORK': ['nw1']}

  -bxd

• ORA-01079: ORACLE database was not properly created, operation canceled

  Hi all
  On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
  
  My problem is that I have to delete the database as the same is not created correctly.
  To do this, I get the error when I try to mount the database below.
  
  ORA-01079: ORACLE database was not properly created, operation canceled
  
  Also, when I started the database by specifying the file pfile, he threw out saying error
  ORA-00202: control file: ' D:\ORACLE_10G\DATABASE\CTL1SAMPLEDB. ORA'
  
  When I specified control_files clause in init.ora, that I was getting above error, so I tried to remove the same but still facing the same error.
  
  Can someone help me solve the problem...?
  
  Thank you

  ROCs Rossy says:
  Hi all
  On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0

  My problem is that I have to delete the database as the same is not created correctly.
  To do this, I get the error when I try to mount the database below.

  ORA-01079: ORACLE database was not properly created, operation canceled

  Also, when I started the database by specifying the file pfile, he threw out saying error
  ORA-00202: control file: ' D:\ORACLE_10G\DATABASE\CTL1SAMPLEDB. ORA'

  When I specified control_files clause in init.ora, that I was getting above error, so I tried to remove the same but still facing the same error.

  Can someone help me solve the problem...?

  Thank you

  You should be able to do the following on the command line windows

  oradim -delete -sid sampledb
  

  then remove the D:\ORACLE_10G\DATABASE\ of the file system folder (assuming that there are only records your db in there.
  Finally, delete the D:\ORACLE_10G\ADMIN\SAMPLEDB folder structure assuming it exists.

  Niall Litchfield
  http://www.orawin.info