When you create a parameter in a data model, which determines which object in the DataSet it will be used on?

Similar Questions

• When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  Hi kevin7frg,

  You can go to "file > create > scanner > configure presets PDF»

  The dialog box that appears, you can choose 8.5 X 11 as the default width and height of PDF pages to scan.

  

  Hope that helps.

  Kind regards

  Ana Maria

• When you try to copy a. DAT in Vista file, get error 0x80070057L, the parameter is incorrect

  I tried to copy a *. DAT file from a CD on my HARD drive. During the last 5 seconds, I always get the following error message:

  Error 0x80070057L the parameter is incorrect

  I am able to open the file, but can not copy. I tried on my laptop (Vista SP1) and on an another desktop running XP and get the same error.

  What causes this problem?

  Hello

  The problem occurs when you try to copy other files?

  Check if you can copy files in Mode without failure.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-CA/Windows7/start-your-computer-in-safe-mode

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• "Not a valid error code" when you create a shared variable of data type custom

  I am trying to create a shared variable with a data type of a 2d double table. I created a custom control that contains a table with a numeric type for this 2d. Manager of distributed system v12 I select 'add a variable', then select 'of the custom control. Once select my control I get the following error: "invalid data type. You want to choose a different data type. Any advice as to why it doesn't work? Thank you.

  This seems to be recorded in the CAR #405941.  All this is a bit strange, but I'll try better possible workaround solutions I can.  I tested a large number of these myself, and here is what I found.

  1. make sure that the custom control you did was created in 2012 of LabVIEW or you save it in an earlier version.  If you save on an earlier version, you may also open the .ctl in LabVIEW 2012 and resave it (I needed to do).  I tried to create my own control in 2012, as well as save the control to a previous version, the two worked, but I don't end up with the same result (I don't understand this, but I wanted to mention it so that you know).

  2. it seems that you are able to make the variable shared by program by modifying the example of the community to adapt to your needs.  If you do not need to create many variables it may be the best option if it works for you.

  I would also try adding the variable of the LabVIEW project, you are working on that.  It wasn't a direct troubleshooting step but there are several ways of doing things in LabVIEW and, sometimes, one of them is working while the other does not.

  Edit: Example of community is here https://decibel.ni.com/content/docs/DOC-16863

• When you create a calendar in Photos for Mac, I can't work on the use of more than one Photo per month

  I created a calendar using Photos for Mac (picture 1,5).

  However, I can't create each month using several photos. It is the first calendar, I've done since the change of iPhoto pictures. I know I used to be able to choose various options for layout, including several photos in iPhoto. I just hope that it is something simple that I forgot.

  Thanks in advance.

  Right-click on a photo placed and select layout options - you have options from one to seven photos here

  LN

• When you create a collection, I don't get a synchronization option (checkbox) with LR mobile why? I use a pc with windows 7

  I'm implementing a collection on my desk to use the moble option. I am using Windows 7 and when I click the icon it shows the collection dialog box which is + collection guess to have a box to check called 'sync with lightroom for mobile' but he's not here. How do I rectify this?

  You'll need-

  1. the CC subscription plan photography. (Stand alone v6.5 provides mobile sync)

  2. the sync works behind the plate of identity under the menus - click the menu drop down.

  

  3. then you click on the icon of synchronization next to your standard collection in the collection library panel (and not a smart set)

• How to specify the file of virtual hard disk when you create a new virtual machine using virtual hard disk on the data store?

  I'm new to PowerCLI and find quite simple, but in the documentation I read, I don't see how to use a virtual hard drive, existing on a data store when you create a new virtual machine.

  Is this simple registration on the virtual hard disk, or did I miss something?

  My current create VM is the following statement:

  New-VM

  -Name $TargetHostName -host $TargetVMCenterHost -data store $TargetVMCenterDatastore DiskMB - 20000 -MemoryMB $TargetHostMemoryMB -NumCPU $TargetHostCPUs -ID $TargetHostOS -CD -Description $TargetHostName

  Didn't notice this before, but I think that vSphere will use a backslash instead of a slash in the paths.

• How do you get the layers work correctly when you create a document merged into the InDesign data merge feature?

  Hey everybody,

  I working on a card game using data with a .csv file merge and spin in unusual behavior when you create a merged document when my master document had layers.  Imagine I had a layer of structure that looks like this:

  Layer has
  -< DataMergeFrameA >

  -Cooked in the static element
  Layer B

  -Cooked in the static element B
  -< DataMergeFrameB >

  -< DataMergeFrameC >

  Layer C
  -Cooked in the static element C

  -< DataMergeFrameD >

  Preview, this hierarchy is respected and the image is superb.

  When I create my merged document that each individual card includes this editable structure:

  Layer has
  -< DataMergeFrameA >

  Layer B

  -< DataMergeFrameB >

  -< DataMergeFrameC >

  Layer C

  -< DataMergeFrameD >

  And the order in which the elements are drawn resembles what happened past:

  -< DataMergeFrameA >

  -< DataMergeFrameB >

  -< DataMergeFrameC >

  -< DataMergeFrameD >

  -Cooked in the static element

  -Cooked in the static element B

  -Cooked in the static element C

  I would * really * like solving this problem without going through a column of data fusion with just the same picture in each area or something stupid like that, especially because some of my other static elements are generic text boxes. Is it possible to apply the stacking order in a merged document?

  I have attached a screenshot of the preview and the merged document.
  * WARNING: The main art is a temporary placeholder *.

  The one on the left is how it looks in preview. The second is the merged document. The major problems are that a) static grass image should appear on the art main and b) main image overlays areas of main text on the left. How can-

  

  Try moving it all off the master and on the page of document in the model.

• -You also get an invalid identifier error when executing this query sql for a data model, but not in TOAD/SQL Developer?

  Hello OTN.

  I don't understand why my sql query will pass by in the data model of the BI Publisher. I created a new data model, chose the data source and type of Standard SQL = SQL. I tried several databases and all the same error in BI Publisher, but the application works well in TOAD / SQL Developer. So, I think it might be something with my case so I'm tender hand to you to try and let me know if you get the same result as me.

  The query is:

  SELECT to_char (to_date ('15-' |)) TO_CHAR(:P_MONTH) | » -'|| (To_char(:P_YEAR), "YYYY-DD-MONTH") - 90, "YYYYMM") as yrmth FROM DUAL

  
  

  Values of the variable:
  

  : P_MONTH = APRIL

  : P_YEAR = 2015

  I tried multiple variations and not had much luck. Here are the other options I've tried:

  WITH DATES AS

  (

  Select TO_NUMBER (decode (: P_MONTH, 'JANUARY', '01',))

  'FEBRUARY', '02',.

  'MARCH', '03'.

  'APRIL', '04'

  'MAY', '05'.

  'JUNE', '06'.

  'JULY', '07',.

  'AUGUST', '08'.

  'SEPTEMBER', '09'.

  'OCTOBER', '10',.

  'NOVEMBER', '11'.

  "DECEMBER", "12."

  '01')) as mth_nbr

  of the double

  )

  SELECT to_char (to_date ('15-' |)) MTH_NBR | » -'|| (TO_CHAR(:P_YEAR), 'DD-MM-YYYY') - 90, "YYYYMM")

  OF DATES

  SELECT to_char (to_date ('15-' |: P_MONTH |)) » -'|| ((: P_YEAR, 'MONTH-DD-YYYY')-90, "YYYYMM") as yrmth FROM DUAL

  I'm running out of ideas and I don't know why it does not work. If anyone has any suggestions or ideas, please let me know. I always mark answers correct and useful in my thread and I appreciate all your help.

  Best regards

  -Konrad

  So I thought to it. It seems that there is a bug/lag between the guest screen that appears when you enter SQL in the data model and parameter values, to at model/value data.

  Here's how I solved my problem.

  I have created a new data model and first created all my settings required in the data model (including the default values without quotes, i.e. APRIL instead "Of APRIL") and then saved.

  Then I stuck my sql query in the data model and when I clicked ok, I entered my string values in the message box with single quotes (i.e. "in APRIL' instead of APRIL)

  After entering the values of string with single quotes in the dialog box, I was able to retrieve the columns in the data model and save.

  In the data tab, is no longer, I had to enter the values in single quotes, but entered values normally instead, and the code worked.

  It seems the box prompted to bind the values of the variables when the SQL text in a data model expects strings to be wrapped in single quotes, but no where else. It's a big headache for me, but I'm glad that I solved it, and I hope this can be of help to other institutions.

  See you soon.

• When you create an additional vDS?

  There is a lot of discussion on how to create a vDS, but I can't find the discussion when you create an additional vDS.

  We are all preparations based NFS data, so we plan to create a vDS with storage network cards and another without storage vDS.

  But that might just be more heard management.

  Personal support and general discussions of folk sales said that this should not be necessary. Ask ' vDSes how do I ' always seems to get the answer "One", so I thought I would try the issue of the opposite effect: "Why would I ever need more than one?"

  Note: VMware increased the number of vDS by vCenter Server from 32 to 5.0 to 128 in 5.1, if anyone should need more than one...

  This question came up recently: http://communities.vmware.com/message/2193713

• Is it Possible to use a function when you create a table?

  Hello

  Is it possible to use a function during the construction of a table?

  I would like to browse my data returned from the db and call a function. The part where I call the function "myFunction [i]" doesn't seem to work. How can I solve this problem? I need to put the function call results in the table.

  var i: uint;

  for (i = 0; i < dataArray.Length; i ++)

  {

  dgArray = [{name: dataArray [i] .name, Type: myFunction [i]}];

  }

  Thank you!
  -Laxmidi

  Hi laxmi,

  Yes of course it is quite possible to use a function when you create a table... In your code, you made some mistakes...

  You used hooks to call the function myFunction [i]... where you are supposed to use parentheses... myFunc (i)... and other you must push the object in the dgArray but yous hould not not attribute...

  dgArray = [{name: dataArray [i] .name, Type: myFunction [i]}]; This will result in only the last table iterates in dgArray...

  So you should write dgArray.push ({name: dataArray [i] .name, Type: (i) myFunction});

  Check out the code below...

  
  http://www.Adobe.com/2006/mxml"layout ="absolute"creationComplete ="init (); » >
  
    private var dgArray:Array = new Array();
  private var myDataArray:Array = [{data: '1', name: 'Robert'}, {data: '2', name: 'Nicolas'}, {data: '3', name: "Bika"}]
   
  private function init (): void
  {
  for (var i: int = 0; i
  {
  dgArray.push ({name: dataArray [i] .name, Type: (i) myFunction});
  }
  }
    
  private void myFunction(i:int):String
  {
  Return 'Type' + i;
  }
  ]]>
  
  

  If this post answers your question or assistance, please mark it as such.

  Thank you

  Jean Claude Chari

• Get the blue screen when you create a new message or the response message in OWA Exchange 2007

  Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/

  It will be useful.

• When you create a new message in Windows Mail only some contact appear just by typing the first few letters of their name

  Original title: Windows mail contact probrem

  When you create a new email, why some of my E-mail contacts appear with just by typing the first letters of his name while other contacts in my list do not appear?

  for example, if I send an email to alan, so when I type the letter 'a' all contacts beginning with 'a' used to appear and you can select whatever you want. This is not the case now, and I have checked the contacts that do not appear are saved the same way as those that appear.

  Any suggestions please

  WinMail stores AutoComplete addresses in the registry and it has a maximum of 29. Claire on some dead wood.
   
  How to delete registration completion email in Windows Mail
  http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.html
   
  How to remove an address from the list of AutoComplete in Windows Mail
  http://email.about.com/od/windowsmailtips/Qt/et_del_autocomp.htm 

• When you create a new email a first letter of the contact request full email address on frequent contacts.

  original title: contact prompting

  When you create a new email a first letter of the contact request full email address on frequent contacts. How to extend the time, what he remembers of those contacts?

  WinMail remembers only 29 addresses used through the registry. These links will give you a few options.

  How to delete registration completion email in Windows Mail
  http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.html

  How to remove an address from the list of AutoComplete in Windows Mail
  http://email.about.com/od/windowsmailtips/Qt/et_del_autocomp.htm

• Why the Amazon icon will not appear when you create a shortcut

  When I create a shortcut to a Web site; instead of the web logo, I get the blue standard & green "globe".

  How can I correct this (windows 7)?

  Thank you

  Clyde

  Hello

  You are welcome.

  Shortcuts to sites will initially their own custom icon when you create a shortcut. This icon is called a "favicon.ico" and is stored in the temporary Internet files (TIF) cache, which is where all website files, are stored when you visit them.

  When the user performs a maintenance and removes the TIF cache, all these custom icons are removed with everything else. This will cause the icon of Internet Explorer by default to display on these shortcuts. This also occurs when the maximum allowed disk space has been exceeded and that the files are deleted automatically to maintain the use of disk space.