When you use the buttons to generate points of quiz - can problems with cpQuizInfoPointsscored anyone help?
Hello
I am putting together that a test is several sections which must give "advice" on measure to users based on their interactions across multiple slides. I tried this several ways but can get anything to work for my needs.
Is closer to just using the keys to generate some test scores (each button can be given an individual score for generating marked differently from interactions on each page) and then attempt to deliver scenarios advice branched using advanced actions 'if cpQuizInfoPointsscored variable if' less/more than... etc go slide.... I'm frustrated by the fact that the cpQuizInfoPointsscored variable does not seem to pick up dozens of buttons, even if you include the points in the quiz and these scores come out at the end of the quiz or the results page.
These scores are obviously stored somewhere - is it variable anther I can go to read these scores at some point and branch a scenario in response? Is there another way to do this?
See you soon,.
Matt
I would recommend that you create your own user variables to measure the success of the interactions and then use the values of these variables to trigger the branching of fast Action. As you have seen, some score is computed only once you get to the Quiz results slide. Having your own variables will give you more freedom to do what you please.
Tags: Adobe Captivate
Similar Questions
-
Web page moves to the left when you use the buttons of the anchor
I almost finished the design of my site in Muse. All previews OK in the Viewer to Muse. When I preview the page in Chrome there is a problem. Everything works great until you use the page with anchor buttons. When you scroll it centered, but when you use anchor buttons all over the page, and especially everything on it moves upward and to the left. Once he goes left, he remains left. Anchor to the left buttons are pined. They stay in place all the time. There is a photo pinned to the right and left in place also. The Web page containing the achor buttons goes to the left when using the anchor buttons pinned. All other pages on the site remain focused. The option "Center horizontally' is checked in the options page for each page. What should I do to avoid that page travel biased?
There is a void textframe top right of your page. Please see the screenshot below. Detached and reprint should solve the problem.
See you soon,.
Vikas
-
In Lightroom, DEVELOP the image does not copy from before to after after using the buttons below.
Is it possible LR shows before and after the same?
By clicking on a button with >< can="" make="" them="" the="">
You can reset the State 'Before' of a picture by right-clicking on a stage in the history panel.
Press the [\] to also get a 'before '.
-
404 error when you use the button «see more»
Since the beginning of Adobe Stock in August 2015, I never had the "Show more" button work properly when previewing of images. Can I use the options for most of this series, more of this model and similar images, but see button more still records a 404 error screen. At this point, I completely close my browser for Adobe Stock to reset. Any suggestions?
Hello
Please see the links below for help:
Has thrown two licenses-error 404 #92395577 kamimi
Hope this helps!
-
I currently have two accounts in use on my thunderbird. When sending emails on Mozilla Thunderbird, immediate preference is to send from the first account I added to the program, but most of the time, I only want to send emails on the second account. I often forget to change the e-mail address of the sender to the top of the message window that becomes a gene. I don't know there must be a way to change the preferences around, but for the life of me I can't find it anywhere!
If you are viewing emails and folders for the account 'A' and choose to write a new message, and then FROM use e-mail address of account 'A'.
If you were displaying foldres 'B' and email account and choose to write a new message, and then FROM use account address email 'B '.
If you view e-mails in local folders and choose to write a new message, then FROM using anything that is set as default.
At the top e-mail account is the default e-mail account.
You can change which account is set as the default value.
- 'Tools' > 'account settings '.
- Select the e-mail account you want to set as default
- Click on "Actions account."
- Select: "set as default"
- Click OK to save the changes.
The news 'Tools' > 'Account settings' guess you have activated all your toolbars. Otherwise, you can also access the "Account settings" via:
- '3 bar menu icon' > 'Options' > 'account settings '.
or
- Right click on the email account in the left pane of the folder, and then select "settings".
As you have only two e-mail accounts, it is easy to exchange the default and change the order that they are displayed. If later, you add several email accounts and need to change the order of these accounts, not only to define a default value, you can use this addon:
Please note that this addon also lets you reorganize the folders.
-
The vi: "FLUKE 884 X series, readonly Measurement.vi" can be downloaded from "http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=9431."
I want to use this driver to a resistance reading 4 son who, in the Act, is a PT100 resistance to measure the temperature.
When I click on 'run always' - button on the Panel before LabVIEW, the program reads the current resistance.
However after each reading, there comes the "overload" - error message on the screen of the multimeter 8846 has.
Sometimes, it can be also seen a small 'mistake' - sign on the screen and, sometimes, 8846 beeps.
I already disabled the "ID-Query" in the "Initialize.vi".
What can I do to avoid these error messages?
Thank you for your help.
Instead of using the 'FLUKE 884 X series, readonly Measurement.vi' - vi, I use the 'Read (Single Point) .vi' - vi, which is also included in the
downloadable file. Now, there is no error messages more.
Best greetings, heinzmann.
-
I have a laptop HP which I use with an external monitor as your desktop put in place. I have no problem with the standard choice working about the poster. However, I would like to than the main office (Start menu and shortcuts) to display on the monitor external and my laptop at the extended screen display. I came across ideas in the research of the object, but most of them is based on earlier versions of Windows and not Windows 7.
I have a laptop HP which I use with an external monitor as your desktop put in place. I have no problem with the standard choice working about the poster. However, I would like to than the main office (Start menu and shortcuts) to display on the monitor external and my laptop at the extended screen display. I came across ideas in the research of the object, but most of them is based on earlier versions of Windows and not Windows 7.
Hey English2Go
Here is the vista forums
Try the forum Office windows 7 the link below
http://social.answers.Microsoft.com/forums/en-us/w7desktop/threads?filter=AllTypes
Walter, the time zone traveller
-
Need to reset the button by default when you use the structure of the event?
When you use the buttons with a mechanical action "releasing lock" to only trigger the same structure with the same 'value has changed', the button does not jump upwards as you would expect. I can get to behave as I want by adding a "default reset" invoke the node, but this seems somewhat exaggerated. Is there an easier way to get the button to jump to the top after pressing on?
The button will reset once it is read by the code. This means that the terminal is inside the structure of the event. If you move outside the terminal, it would read only the beginning of the race and then never and it will not be reset.
If the terminal is learn the structure of the event, it is read by the code (even if it is not connected to anything) and it reset as soon as the event has a chance to run.
-
When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse. How can I get the pen tool to release the anchor
Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.
-
Move the point of origin when you use the scale tool
Hello
Can someone tell me if it is possible to move the point of origin when you use the scale tool? By default, when I change by dragging an anchor of the corner, the opposite corner is used as the origin. Ideally, I would like to to scale using an origin that is biased, I can specify sort. I know that you can do during the rotation, but I was not able to determine if this goal is achievable during the measurement. I use Illustrator CC 2015.3.1 and Mac.
Any help would be appreciated.
Thanks in advance
Jason
Click where you want the origin to be. Or move the reticle. Exactly the same as with the rotation tool.
-
Error message when you use the menu buttons in IE but not chrome
Hello.
My recently transferred website has a problem when you use the menu anywhere on the site in Internet Explorer, but not on my mac using chrome? I get this error message came up on top of the screen which takes three clicks to go MuseJSAssert: error calling the function switch: TypeError: object does not support property or method . So, if I click on anything else it pop ups again. Any ideas how to get rid of this? I tried to re - download files from muse, but the same phenomenon occurs. I tried to download the files in a folder of exported frm different muse I saw had worked for someone else on here, but no difference? Any help much appreciated.
Website: vanletteringco.com
You might get an error that iPage are sorting when opening too, just remove the /root1 in the address bar to see the site?
Thank you
GAV
Gavin,
Using Jotforms should ideally create not the questions here. Did you try reseating Jotforms code? I suggest you to get a charge of Jotforms code and then try to insert it to test.
Kind regards
Sachin
-
MainStage "lag" when you use the SPACEBAR as 'play '.
Hi all, I'm relatively new to Mainstage (V3), and I'm hoping to use it for the first time this weekend to play the extra backing with a band tracks
The issue I'm having, is that with the SPACEBAR of laptops on 'PLAY '. It is often "lag". or simply does not start the song. I have to wait a second, then hit again, it will work. It is almost as if in Performance mode, when you use the down arrow key to select the next song, the 'focus' is on the list of patch, and if I click in the background where are playback buttons and stop, THEN that will work. I have not, however, been able to reproduce this particular behavior on a consistent basis.
Everyone knows the same thing? Or why it is so 'all or nothing '?
And a question important much donor... I gave all my reading titles to the waveform appropriate the other night (so I could visually see the waveforms above the attenuator as offers of backing track model), however, once I was moving songs in a different order, which stopped working. No idea why?
Thnaks in advance
About the offset by hitting the space bar, a thought occurred to me.
How Mainstage allocates 44.1/16 bit wave files used in the reading plug-in? Which means, when a song is selected, which uses, for example, to separate the 5 cases of reading, one can assume that these audio files used in that song would need to "load" first.
Anyone know if this is how Mainstage works?
-
Satellite L40 crashes when you use the product recovery disc
When you use the product recovery disc to repair my laptop it hang after language page display.
Select meaning when it displays the language, I select language and press next, no action more far there... I can move one pointer.
Some may help how to solve the problem.
Thank you> Select sense when it displays the language, I select language and press next, no action more far there
Perhaps, your recovery disk is corrupt. What happens if you try with Windows disk copy?
-
'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English. The e is a compatibility issue with dropbox or Google drive in El Capitan? Those are the plug-ins only that I could find. Thank you very much.
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).
Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, clear the search box, and then select
DIAGNOSIS AND diagnostic USE information reports ▹ user
(not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.
I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.
If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.
In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "
Please do not post other types of diagnostic report - they are very long and rarely useful.
When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Screen resolution/size changes when you use the touchpad
Bought Probbok 4530 s. Win 7. I continue to have the screen/print resolutiom size change when you use the touch pad. The pointer seems to 'paste' and then when I move it, the screen get is much lower or higher. I continually have to type ctrl + or - to get the size of the screen back to the 'normal '. Is this something to do with the settings for the touchpad or pointer? Its driving me crazy...
Bruce
Hell, I think that this is it... Pinch Zoom! I have disabled that, as well as the "allow the theme change mouse pointers" on the pointers tab. I'm playing with it now, and it seems to have solved the problem. I'll let you know if this isn't... Thanks for the great help, Dragon fur!
Maybe you are looking for
-
Why is there a limited number of changes in the region for the dvd player
Hello I live in the US but have a number of DVD in the United Kingdom - region 2, I occasionally like to play. When you place a region 2 DVD in the tray and launch, I am asked to change region 1 (used 99% of the time) to region 2. BUT there is a mess
-
my computer shutdown itself each time I use netflix for a few minutes
my computer shutdown itself each time I use netflix for a few minutes. I don't know what the cause, but it's okay
-
Constantly, they are the same setup update
There are four update constantly, they want to be installed.
-
I did not cause the errors on my windows live mail. Why n "windows t fix it.
I can t send or receive direct mail windows errors. Why don, t they correct their mistakes.
-
Office Jet Pro 8600: bad quality printing on HP Premium Plus Photo paper
Using HP Premium Plus Photo paper print quality is terrible! I have selected the correct paper and the "highest DPI", but the results are shockingly bad. The same photo printed on paper ordinary is by far superior, so it seems to be the book that is