MainStage "lag" when you use the SPACEBAR as 'play '.
Hi all, I'm relatively new to Mainstage (V3), and I'm hoping to use it for the first time this weekend to play the extra backing with a band tracks
The issue I'm having, is that with the SPACEBAR of laptops on 'PLAY '. It is often "lag". or simply does not start the song. I have to wait a second, then hit again, it will work. It is almost as if in Performance mode, when you use the down arrow key to select the next song, the 'focus' is on the list of patch, and if I click in the background where are playback buttons and stop, THEN that will work. I have not, however, been able to reproduce this particular behavior on a consistent basis.
Everyone knows the same thing? Or why it is so 'all or nothing '?
And a question important much donor... I gave all my reading titles to the waveform appropriate the other night (so I could visually see the waveforms above the attenuator as offers of backing track model), however, once I was moving songs in a different order, which stopped working. No idea why?
Thnaks in advance
About the offset by hitting the space bar, a thought occurred to me.
How Mainstage allocates 44.1/16 bit wave files used in the reading plug-in? Which means, when a song is selected, which uses, for example, to separate the 5 cases of reading, one can assume that these audio files used in that song would need to "load" first.
Anyone know if this is how Mainstage works?
When I press the SPACEBAR to start playback of a file in edit mode, a second of 2-3 delay before playback starts ago, this makes editing very difficult competently. does anyone know of any settings that may resolve this problem or may have another reason for why this might be happening?
It may happen if the sampling frequency of your hearing file does not match that of your audio interface as hearing should make a conversion of the prior sampling rate it loads the audio buffer.
Two days ago I had only a video that I recorded on my desk since September 2015 until I've decided to download a dozen more. They all play wonderfully like the first video, whenever I clicked once on each and you press the space bar. Now, I noticed that whenever I do the same thing, they open with QTP. The request indicates to use is 'Finder '. It is very unpleasant to the QTP, and whenever I decide to press the space bar to pause, it hides the video until you press the space bar again. In "Get Info", he said that QTP is the value by default, every time I open it, but that applies only when I have the video right click and choose 'open '.
After lazily avoiding my Mac for a month or two, I decided to update just to see if the issues have been resolved, but it's always the same! I am aware that I can simply right-click to open with QTP or open it and click on 'Open with QuickTime Player', but it is disappointing that it is rather backward. I would add that there are videos in "Downloads" that automatically use QTP with a single click (if QTP was opened on the dock or not). If I drag downloads and in the office, it will play like the others in the office. If I select a video of downloads on the Finder, it won't use QTP. This has probably to do something with the Finder preferences, but I don't the have not yet found.
If anyone has experienced this? If so and it has been resolved, what was done to solve this problem? Would it be because of the application, I used to convert them? Or did some adjustment problems? Thanks in advance!
That's what I feel now at the opening with the shortcut of the SPACEBAR (on the desktop and through Finder):
This is what I used to experience and want to come back:
OMG, I feel like a fool. Basically, you can simply double click on the video icon that she either automatically open in QuickTime Player...
Hello, I have recently upgraded to Windows 10. I have the latest version of Ligtroom 6.
When I use my Wacom Bamboo tablet and try to move a cursor, initially it does not, move initial position, it climbs to approximately + 5 or - 5. If I continue to slide, it follows then correctly my movement of the stylus.
I tried to reinstall the drivers, but it didn't fix it. He nevere, that has happened with previous versions of Lightroom and it does not occur with any other application.
Is this a known bug?
In the Wacom tablet properties / Grip Pen / Mapping of audit of the tab to see if "Use Windows Ink" is unchecked.
(It was the fix/work around in previous versions of versions/LR pilot).
It looks like when you improve either LR or your Wacom driver, that it gets reset back to the manufacturer.
When I was with LR2015.1 I had to have the setting ink disabled Windows so that the Wacom pen works properly
Just check now and in ink of Windows LR2015.2 has been activated and it works well.
I have not yet upgraded to LR2015.2.1 to see if I need to disable Windows ink again to make it work with this latest version.
Currently my Wacom driver is 6.3.14 - 1 (don't has not amended it LR 2015.1 to LR2015.2)
I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:
"C:\Program Files (x 86) \Mozilla" PEI
Nothing happens with every order.
I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 126.96.36.199 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "
If you have any ideas, I had appreaciate that your expertise!
Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.
How can I enter the character u when you use the pinyin-simplified keyboard, for example, for the opening of the syllable nu with your 3.
The keyboard pinyin-simplified is for entering the characters han, not latin. If you want to type the latin pinyin, you must use the extended ABC keyboard configuration. A list of the shortcuts is to
Is cell required when you use the map applications of conduct?
Yes. GPS does not work with a Wi - Fi connection.
WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?
This extension will help you implement the security policies for access to the Clipboard.
Allow the extended Clipboard support:
As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.
I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...
Any assistance received very warmly.
Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?
Maybe's external screen connected to the docking station?
Since I bought my M40X 141 in July 2005, I got black screen frequently when you use the wifi.
You know this black screen with typical noise from the hard drive.
I did all the updates without effect. The local seller understood nothing black screen, associated with the use of wifi.
In the XP world, nobody seems to find this kind of abnormal things so I'm desperate to find a solution to stop the frequent black screens. Recently try a usb dlink wifi dongle (dwl-G122) the constant flow of black screens disappeared
(An Xp session 10 days was previously impossible).
Now, I know this is a bug in the original software and I try desespartely to find a patch or updated driver or professional advice.
Is there someone here who can help a tired multi restart man to use his laptop with the original material?
Your laptop should still be guaranteed if you bought in June 2005. Take it to your authorized Service Provider nearest and have their say. They should already provide for a procedure for this and know what to do. Sure the frequency that uses WIFI and display inverter coincides, and you get the black screen. Change them should fix this problem.
I know this is a silly question but its actually something I know not so thought I would ask.
I almost always plug my laptop into the supply line (satellite a500 1gl)
I was wondering have you actually keep the battery installed even when using the electrical network.
Or is it really advisable to remove the battery when you use the network?
I didn't know if the battery should always be in place.
Thanks for your help
A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance
However, sooner or later each battery would die it s only a matter of time, you know
When you use the product recovery disc to repair my laptop it hang after language page display.
Select meaning when it displays the language, I select language and press next, no action more far there... I can move one pointer.
Some may help how to solve the problem.
> Select sense when it displays the language, I select language and press next, no action more far there
Perhaps, your recovery disk is corrupt. What happens if you try with Windows disk copy?
When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.
Yes! I finally solved it on my system:
- Go to the control panel
- Choose the material and audio
or simply to display all Control Panel items
- Select SRS Premium Sound Pro (it's an icon of circle blue/white)
- Wait for the program to come black EQ
- Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
- Uncheck the 'improvement of Audio '.
In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.
Loop Finder crash after upgrading to El Capitan. 'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.
'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English. The e is a compatibility issue with dropbox or Google drive in El Capitan? Those are the plug-ins only that I could find. Thank you very much.
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
For this step, the title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).
Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
In the Console window, clear the search box, and then select
DIAGNOSIS AND diagnostic USE information reports ▹ user
(not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.
I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.
If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.
In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "
Please do not post other types of diagnostic report - they are very long and rarely useful.
When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
So I have a problem when you use the TERM built on stage.
the first time I run my sequence everything goes normally...
the second time I try to run the sequence it freezes teststand.
I have notices that when I run my sequence. I can see on TRACK OR the following:
but after that the sequence is complete. It is not close to the niSE sesion. that this has something to do with the gel TestStand?
If this isn't the case, have you had this question before?
I contacted pickering... they got me new drivers
Response of Pickering:
It sounds like the problem which came first when NEITHER Visa has been changed, version 5.2 or higher, I think. In any case, I'll try first to install the latest version of the Pickering IVI driver.
I installed them and it works now...
Maybe you are looking for
Hi all As a result of a hosting problem, I need to copy the local users and groups to a Server 2008 R2 to another in a different hosting company. Please note that these servers are not part of a domain or forest. The two are on their own (i.e. the Wo
Old Packard Bell iMEDIA. Reformated HD and installed XP. Validated. MS keeps asking me to download "New" MS update program and then tells me it is unable to do so due to a "fault". My system information: Itel (R) CPU. 2.00 GHz. 1.99. 448 MB of Ram He
I uninstalled work Reg, DELL has uninstalled work Reg and tell me this isn't here but it appears eager to do a scan and difficulty. This program has been installed by Dell and I never activated, but in it and I can't get out. Someone help please?
Original title: Highlight the text or cells For these last days, it has become almost impossible to make one of the most fundamental things that I do in Windows: highlighting of text or copy and past, delete or modify cells. Since Monday or Tuesday
Hello I have a bold 9900 buddies. For about a week I could not access my blackberry ID account. It keeps saying 'IMPOSSIBLE to LOG IN YOUR BLACKBERRY ID ACCOUNT' suggestions please?